Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-08-27 11:55:31
From: ahenrique
Description: FreeBSD/amd64 on Dell Inc. Vostro 5490
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r364420: Thu Aug 20 12:12:00 -03 2020
    xxx@xxx.xxx:/usr/obj/usr/src/amd64.amd64/sys/CUSTOM amd64
FreeBSD clang version 11.0.0 (xxx@xxx.xxx:llvm/llvm-project.git llvmorg-11.0.0-rc1-47-gff47911ddfc)
VT(efifb): resolution 1920x1080
link_elf_obj: symbol kernel_map undefined
KLD file nvidia.ko - could not finalize loading
KLD file nvidia-modeset.ko - cannot find dependency "nvidia"
CPU: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz (2112.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806ec  Family=0x6  Model=0x8e  Stepping=12
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0xbc000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8015118336 (7643 MB)
CPU microcode: updated from 0xca to 0xd6
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   Dell Inc>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 2 3 7 5 4 6
Timecounter "TSC" frequency 2112080832 Hz quality 1000
Cuse v0.1.36 @ /dev/cuse
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd1 at kbdmux0
000.000051 [4342] netmap_init               netmap: loaded module
[ath_hal] loaded
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <DELL Dell Inc>
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xc0000000-0xc0ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0
acpi_video0: <ACPI video extension> on vgapci0
vgapci0: Boot video device
pci0: <simple comms, UART> at device 19.0 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xc2300000-0xc230ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x5080-0x5087,0x5088-0x508b,0x5060-0x507f mem 0xc2324000-0xc2325fff,0xc232e000-0xc232e0ff,0xc232d000-0xc232d7ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci1: <VGA-compatible display> port 0x4000-0x407f mem 0xc1000000-0xc1ffffff,0x90000000-0x9fffffff,0xa0000000-0xa1ffffff at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc2204000-0xc2204fff,0xc2200000-0xc2203fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 29.4 on pci0
pci3: <ACPI PCI bus> on pcib3
nvme0: <Generic NVMe Device> mem 0xc2100000-0xc2103fff at device 0.0 on pci3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Comet Lake-LP HDA Controller> mem 0xc231c000-0xc231ffff,0xc2000000-0xc20fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
hwpstate_intel4: <Intel Speed Shift> on cpu4
hwpstate_intel5: <Intel Speed Shift> on cpu5
hwpstate_intel6: <Intel Speed Shift> on cpu6
hwpstate_intel7: <Intel Speed Shift> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <BC511 NVMe SK hynix 256GB> NVMe namespace
nvd0: 244198MB (500118192 512 byte sectors)
hdacc0: <Realtek ALC236 HDA CODEC> at cad 0 on hdac0
GEOM_ELI: Device nvd0p4.eli created.
hdaa0: <Realtek ALC236 Audio Function Group>GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: accelerated software
 at nid 1 on hdacc0
pcm0: <Realtek ALC236 (Internal Analog Speaker)> at nid 20 on hdaa0
pcm1: <Realtek ALC236 (Front Analog Headphones)> at nid 33 on hdaa0
hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 18 ports with 18 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <SAMSUNG SAMSUNGAndroid> at usbus0
Root mount waiting for: usbus0
ugen0.3: <vendor 0x04b3 product 0x3107> at usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
ugen0.4: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
Root mount waiting for: usbus0
ugen0.4: <CN0HK46K8LG009C5HH67A02 IntegratedWebcamHD> at usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_IOERROR
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_IOERROR
ugen0.5: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
Root mount waiting for: usbus0
ugen0.5: <JMicron USB to ATA/ATAPI Bridge> at usbus0
umass0 on uhub0
umass0: <JMicron USB to ATA/ATAPI Bridge, class 0/0, rev 3.00/5.08, addr 6> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:1:0: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <JMicron Generic 0508> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number xxxxxxxx
da0: 400.000MB/s transfers
da0: 305245MB (625142448 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
lo0: link state changed to UP
re0: link state changed to DOWN
umodem0 on uhub0
umodem0: <CDC Abstract Control Model (ACM)> on usbus0
umodem0: data interface 2, has no CM over data, has no break
ums0 on uhub0
ums0: <vendor 0x04b3 product 0x3107, class 0/0, rev 2.00/1.30, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
pflog0: promiscuous mode enabled