Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-09-07 21:30:57
From: nullnilaki
Description: NetBSD/vax 9.99.71 AUDIO2 on VAXstation 4000 Model 96
??U?
KA49-A V1.4-0D0-V4.4 100 MHZ
[_MAC_XXXXXXXXXX]
32MB
?? 001 2 LCSPX 0512
>>> boot dka300
-DKA300
>> NetBSD/vax boot [1.12 (Fri Feb 14 00:06:28 UTC 2020)] <<
>> Press any key to abort autoboot 0
nfs_open: must mount first.
open netbsd.vax: Device not configured
> boot netbsd
3402840+203788 [245712+236326]=0x3e6734
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.71 (GENERIC) #7: Fri Sep 4 22:38:38 JST 2020
[ 1.0000000] [_EMAIL_XXXXXX]:/var/obj/current/vax/obj/sys/arch/vax/compile/GENERIC
[ 1.0000000] VAXstation 4000/{90,90A,96}
[ 1.0000000] total memory = 32480 KB
[ 1.0000000] avail memory = 26996 KB
[ 1.0000000] entropy: no seed from bootloader
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: KA49, NVAX, 10KB L1 cache, 256KB L2 cache
[ 1.0000000] ze0 at mainbus0
[ 1.0000000] ze0: hardware address [_MAC_XXXXXXXXXX]
[ 1.0000000] vsbus0 at mainbus0
[ 1.0000000] vsbus0: 8K entry DMA SGMAP at PA 0x27000000 (VA 0x8413f000)
[ 1.0000000] vsbus0: interrupt mask 0
[ 1.0000000] dz0 at vsbus0 csr 0x25000000 vec 524 ipl 17 maskbit 3
[ 1.0000000] dz0: 4 lines
[ 1.0000000] lkkbd0 at dz0
[ 1.0000000] lkkbd0: no keyboard
[ 1.0000000] wskbd0 at lkkbd0 mux 1
[ 1.0000000] lkms0 at dz0
[ 1.0000000] wsmouse0 at lkms0 mux 0
[ 1.0000000] asc0 at vsbus0 csr 0x26000080 vec 510 ipl 17 maskbit 1
[ 1.0000000] asc0: NCR53C94, 25MHz, SCSI ID 6
[ 1.0000000] scsibus0 at asc0: 8 targets, 8 luns per target
[ 1.0000000] spx0 at vsbus0 csr 0x38000000 vec 514 ipl 15 maskbit 2
[ 1.0000000] spx0: Using QVSS 8x15 font
[ 1.0000000] spx0: RAMDAC ID: 0x4a, Bt459 (SPX/LCSPX) RAMDAC type
[ 1.0000000] wsdisplay0 at spx0 kbdmux 1
[ 1.0000000] vsaudio0 at vsbus0 csr 0x26800000 vec 530 ipl 17 maskbit 3
[ 1.0000000] audio0 at vsaudio0: playback, capture, full duplex
[ 1.0000000] audio0: slinear_le:16 -> mulaw:8 1ch 8000Hz, blk 320 bytes (40ms) for playback
[ 1.0000000] audio0: slinear_le:16 <- mulaw:8 1ch 8000Hz, blk 320 bytes (40ms) for recording
[ 1.0000000] spkr0 at audio0: PC Speaker (synthesized)
[ 1.0000000] wsbell at spkr0 not configured
[ 1.0000000] entropy: WARNING: extracting entropy too early
[ 1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[ 3.7196480] sd0 at scsibus0 target 3 lun 0: <COMPAQ, BB009222B5, B016> disk fixed
[ 3.9296480] sd0: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
[ 3.9600540] sd0: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged queueing
[ 4.7098610] boot device: sd0
[ 4.7232870] root on sd0a dumps on sd0b
[ 4.7396660] root file system type: ffs
[ 4.7530460] kern.module.path=/stand/vax/9.99.71/modules
Sun Sep 8 05:42:38 UTC 2058
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
[ 13.0996530] entropy: ready
Loaded entropy from /var/db/entropy-file.
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for DAD to complete for statically configured addresses...
Building databases: dev, utmp, utmpx, services.
Starting syslogd.
[ 36.3296480] sd0(asc0:0:3:0): Check Condition on CDB: 0x28 00 00 69 6d 40 00 00 20 00
[ 36.3897090] SENSE KEY: Media Error
[ 36.4034590] INFO FIELD: 6909268
[ 36.4151350] ASC/ASCQ: Read Retries Exhausted
[ 36.4224180] SKSV: Actual Retry Count: 63
[ 36.4297050] sd0a: error reading fsbn 6909248 of 6909248-6909279 (sd0 bn 6909248; cn 2056 tn 6 sn 80)
[1] Segmentation fault (core dumped) RC_PID= _rc_pid= _rc_original_stdout_fd= _rc_o...
/etc/rc.d/syslogd exited with code 1
Mounting all file systems...
Clearing temporary files.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/syslogd /etc/rc.d/postfix
See /var/run/rc.log for more information.
Sun Sep 8 05:43:32 UTC 2058
NetBSD/vax (Amnesiac) (constty)
login: