Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-09-12 08:56:34
From: mrg
Description: Cubietech Cubietruck
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.99.72 (_cubietuck_) #0: Mon Sep 7 00:01:26 PDT 2020 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX]:/var/obj/evbarm-earmv7hf/usr/src/sys/arch/evbarm/compile/_cubietuck_ [ 1.000000] total memory = 2044 MB [ 1.000000] avail memory = 1986 MB [ 1.000000] entropy: no seed from bootloader [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Cubietech Cubietruck [ 1.000000] simplebus1 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] simplebus3 at simplebus0 [ 1.000000] cpu0 at cpus0: Cortex-A7 r0p4 (Cortex V7A core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu0: 32KB/32B 2-way L1 VIPT Instruction cache [ 1.000000] cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache [ 1.000000] cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache [ 1.000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.000000] cpufreqdt0 at cpu0 [ 1.000000] cpu1 at cpus0 [ 1.000000] cpufreqdt1 at cpu1 [ 1.000000] gic0 at simplebus1: GIC [ 1.000000] armgic0 at gic0: Generic Interrupt Controller, 160 sources (150 valid) [ 1.000000] armgic0: 16 Priorities, 128 SPIs, 7 PPIs, 15 SGIs [ 1.000000] fclock0 at simplebus2: 25000000 Hz fixed clock (mii_phy_tx) [ 1.000000] fclock1 at simplebus2: 125000000 Hz fixed clock (gmac_int_tx) [ 1.000000] fclock2 at simplebus2: 24000000 Hz fixed clock (osc24M) [ 1.000000] fclock3 at simplebus2: 32768 Hz fixed clock (osc32k) [ 1.000000] gtmr0 at simplebus0: Generic Timer [ 1.000000] gtmr0: interrupting on GIC irq 27 [ 1.000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500 [ 1.000003] sun4ia10ccu0 at simplebus1: A20 CCU [ 1.000003] sunxinmi0 at simplebus1: NMI [ 1.000003] sunxigmacclk0 at simplebus2: GMAC MII/RGMII clock mux [ 1.000003] sunxigpio0 at simplebus1: PIO [ 1.000003] gpio0 at sunxigpio0: 175 pins [ 1.000003] sunxigpio0: interrupting on GIC irq 60 [ 1.000003] sunxidebe0 at simplebus1: Display Engine Backend (display-backend@1e40000) [ 1.000003] sun4idma0 at simplebus1: DMA controller [ 1.000003] sun4idma0: interrupting on GIC irq 59 [ 1.000003] sunxisramc0 at simplebus1: SRAM Controller [ 1.000003] sunxisramc0: area: SRAM A3/A4 [ 1.000003] sunxisramc0: area: SRAM D [ 1.000003] sunxidebe1 at simplebus1: Display Engine Backend (display-backend@1e60000) [ 1.000003] sunxihdmi0 at simplebus1: HDMI 1.3 [ 1.000003] sunxitcon0 at simplebus1: LCD/TV timing controller (lcd-controller@1c0c000) [ 1.000003] sunxitcon0: tcon unit 0 [ 1.000003] sunxidebe1: debe unit 0 [ 1.000003] sunxidebe0: debe unit 1 [ 1.000003] sunxitcon1 at simplebus1: LCD/TV timing controller (lcd-controller@1c0d000) [ 1.000003] sunxitcon1: tcon unit 1 [ 1.000003] connector0 at simplebus0: HDMI connector [ 1.000003] sunxisid0 at simplebus1: Security ID EFUSE [ 1.000003] com0 at simplebus1: ns16550a, working fifo [ 1.000003] com0: console [ 1.000003] com0: interrupting on GIC irq 33 [ 1.000003] com1 at simplebus1: ns16550a, working fifo [ 1.000003] com1: interrupting on GIC irq 35 [ 1.000003] fregulator0 at simplebus0: vcc3v3 [ 1.000003] fregulator1 at simplebus0: usb0-vbus [ 1.000003] fregulator2 at simplebus0: usb1-vbus [ 1.000003] fregulator3 at simplebus0: usb2-vbus [ 1.000003] fregulator4 at simplebus0: ahci-5v [ 1.000003] sunxidep0 at simplebus0: activate sunxidebe0 [ 1.000003] sunxitcon1: output to sunxihdmi0 [ 1.000003] fregulator5 at simplebus0: vcc3v0 [ 1.000003] fregulator6 at simplebus0: vcc5v0 [ 1.000003] sunxiusbphy0 at simplebus1: USB PHY [ 1.000003] sunxitwi0 at simplebus1: Marvell TWSI controller [ 1.000003] sunxitwi0: interrupting on GIC irq 39 [ 1.000003] iic0 at sunxitwi0: I2C bus [ 1.000003] axp20x0 at iic0 addr 0x34: AC used, battery present [ 1.000003] axp20x0: DCDC2 1400mV [ 1.000003] axp20x0: DCDC3 1250mV [ 1.000003] axp20x0: LDO2 3000mV, LDO4 3300mV [ 1.000003] axp20x0: LDO3 2800mV [ 1.000003] axp20x0: RTC supercap charger enabled: 3000mV at 200uA [ 1.000003] axp20xreg0 at axp20x0: dcdc2 (vdd-cpu) [ 1.000003] axp20xreg1 at axp20x0: dcdc3 (vdd-int-dll) [ 1.000003] sunxits0 at simplebus1: Touch Screen Controller [ 1.000003] sunxits0: interrupting on GIC irq 61 [ 1.000003] mmcpwrseq0 at simplebus0: Simple MMC power sequence provider [ 1.000003] awge0 at simplebus1: GMAC [ 1.000003] awge0: interrupting on GIC irq 117 [ 1.000003] awge0: Core version: 00000000 [ 1.000003] awge0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] rgephy0 at awge0 phy 1: RTL8211E 1000BASE-T media interface [ 1.000003] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000003] /soc/display-frontend@1e00000 at simplebus1 not configured [ 1.000003] /soc/display-frontend@1e20000 at simplebus1 not configured [ 1.000003] /soc/spdif@1c21000 at simplebus1 not configured [ 1.000003] /spdif-out at simplebus0 not configured [ 1.000003] sunximmc0 at simplebus1: SD/MMC controller [ 1.000003] sunximmc0: interrupting on GIC irq 64 [ 1.000003] sunximmc1 at simplebus1: SD/MMC controller [ 1.000003] sunximmc1: interrupting on GIC irq 67 [ 1.000003] motg0 at simplebus1: 'otg' mode not supported [ 1.000003] ehci0 at simplebus1: EHCI [ 1.000003] ehci0: interrupting on GIC irq 71 [ 1.000003] ehci0: EHCI version 1.0 [ 1.000003] ehci0: 1 companion controller, 1 port [ 1.000003] usb0 at ehci0: USB revision 2.0 [ 1.000003] ohci0 at simplebus1: OHCI [ 1.000003] ohci0: interrupting on GIC irq 96 [ 1.000003] ohci0: OHCI version 1.0 [ 1.000003] usb1 at ohci0: USB revision 1.0 [ 1.000003] /soc/crypto-engine@1c15000 at simplebus1 not configured [ 1.000003] ahcisata0 at simplebus1: SATA [ 1.000003] ahcisata0: interrupting on GIC irq 88 [ 1.000003] ahcisata0: ignoring broken port multiplier support [ 1.000003] ahcisata0: AHCI revision 1.10, 1 port, 32 slots, CAP 0x6f24ff80<CCCS,PSC,SSC,PMD,SAM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ> [ 1.000003] atabus0 at ahcisata0 channel 0 [ 1.000003] ehci1 at simplebus1: EHCI [ 1.000003] ehci1: interrupting on GIC irq 72 [ 1.000003] ehci1: EHCI version 1.0 [ 1.000003] ehci1: 1 companion controller, 1 port [ 1.000003] usb2 at ehci1: USB revision 2.0 [ 1.000003] ohci1 at simplebus1: OHCI [ 1.000003] ohci1: interrupting on GIC irq 97 [ 1.000003] ohci1: OHCI version 1.0 [ 1.000003] usb3 at ohci1: USB revision 1.0 [ 1.000003] sunxiwdt0 at simplebus1: Watchdog [ 1.000003] sunxiwdt0: default watchdog period is 16 seconds [ 1.000003] sunxirtc0 at simplebus1: RTC [ 1.000003] /soc/pwm@1c20e00 at simplebus1 not configured [ 1.000003] /soc/ir@1c21800 at simplebus1 not configured [ 1.000003] sunxicodec0 at simplebus1: A10 Audio Codec [ 1.000003] audio0 at sunxicodec0: playback, capture, full duplex, independent [ 1.000003] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.000003] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.000003] spkr0 at audio0: PC Speaker (synthesized) [ 1.000003] wsbell at spkr0 not configured [ 1.000003] sunxitwi1 at simplebus1: Marvell TWSI controller [ 1.000003] sunxitwi1: interrupting on GIC irq 40 [ 1.000003] iic1 at sunxitwi1: I2C bus [ 1.000003] sunxitwi2 at simplebus1: Marvell TWSI controller [ 1.000003] sunxitwi2: interrupting on GIC irq 41 [ 1.000003] iic2 at sunxitwi2: I2C bus [ 1.000003] /soc/gpu@1c40000 at simplebus1 not configured [ 1.000003] psci0 at simplebus0: PSCI 0.1 [ 1.000003] armpmu0 at simplebus0: Performance Monitor Unit [ 1.000003] gpioleds0 at simplebus0: cubietruck:blue:usr cubietruck:orange:usr cubietruck:white:usr cubietruck:green:usr [ 1.000003] ausoc0 at simplebus0: On-board SPDIF [ 1.000003] /soc/video-codec@1c0e000 at simplebus1 not configured [ 1.000003] sunxitimer0 at simplebus1: Timer [ 1.000003] timecounter: Timecounter "Timer 2" frequency 24000000 Hz quality 200 [ 1.000003] timecounter: Timecounter "LOSC" frequency 32768 Hz quality 150 [ 1.000003] sunxihstimer0 at simplebus1: High Speed Timer [ 1.000003] timecounter: Timecounter "hstimer" frequency 152000000 Hz quality 300 [ 1.000003] sunxihstimer0: interrupting on GIC irq 113 [ 1.000003] ausoc0: autoconfiguration error: couldn't acquire cpu dai on sound node [ 1.000003] entropy: WARNING: extracting entropy too early [ 1.000003] cpu0 has 1 core siblings: cpu0 [ 1.000003] cpu0 has 2 pkg siblings: cpu1 cpu0 [ 1.000003] cpu0 has 1 1st siblings: cpu0 [ 1.000003] cpu0 first in package: cpu0 [ 1.000003] cpu1 has 1 core siblings: cpu1 [ 1.000003] cpu1 has 2 pkg siblings: cpu0 cpu1 [ 1.000003] cpu1 has 1 1st siblings: cpu0 [ 1.000003] cpu1 first in package: cpu0 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] cpu1: Cortex-A7 r0p4 (Cortex V7A core) [ 1.000003] cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.725753] cpu1: 32KB/32B 2-way L1 VIPT Instruction cache [ 1.725753] cpu1: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache [ 1.735736] cpu1: 256KB/64B 8-way write-through L2 PIPT Unified cache [ 1.745737] vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.755743] cpufreqdt0: rate: 960.000 MHz, 1400000 uV [ 1.755743] cpufreqdt1: rate: 960.000 MHz, 1400000 uV [ 1.765740] sdmmc0 at sunximmc0 [ 1.775740] sdmmc1 at sunximmc1 [ 1.795743] armpmu0: interrupting on GIC irq 152 [ 1.795743] armpmu0: interrupting on GIC irq 153 [ 1.805741] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.818016] uhub0: 1 port with 1 removable, self powered [ 1.818016] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.825748] uhub1: 1 port with 1 removable, self powered [ 1.825748] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.837556] uhub2: 1 port with 1 removable, self powered [ 1.837556] uhub3 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.845762] uhub3: 1 port with 1 removable, self powered [ 1.865749] IPsec: Initialized Security Association Processing. [ 1.865749] aes: ARM NEON vpaes [ 1.865749] chacha: ARM NEON ChaCha [ 1.865749] adiantum: self-test passed [ 1.865749] aes_ccm: self-test passed [ 1.865749] blake2s: self-test passed [ 1.875753] ahcisata0 port 0: device present, speed: 3.0Gb/s [ 1.905756] sdmmc1: 4-bit width, 50.000 MHz [ 1.905756] bwfm0 at sdmmc1 function 1 [ 1.915758] (manufacturer 0x2d0, product 0xa962) at sdmmc1 function 2 not configured [ 1.926014] sdmmc0: SD card status: 4-bit, C10, U1, A1 [ 1.935756] ld0 at sdmmc0: <0x03:0x5344:SC32G:0x80:0xf4000a22:0x12c> [ 1.935756] ld0: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors [ 1.955758] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 3.435800] cgd: self-test aes-xts-256 [ 3.435800] cgd: self-test aes-xts-512 [ 3.435800] cgd: self-test aes-cbc-128 [ 3.435800] cgd: self-test aes-cbc-256 [ 3.435800] cgd: self-test 3des-cbc-192 [ 3.435800] cgd: self-test blowfish-cbc-448 [ 3.435800] cgd: self-test aes-cbc-128 (encblkno8) [ 3.435800] cgd: self-tests passed [ 3.445802] WARNING: 1 error while detecting hardware; check system log. [ 3.465804] boot device: ld0 [ 3.475805] root on ld0a dumps on ld0b [ 3.485804] mountroot: trying ffs... [ 3.497573] root file system type: ffs [ 3.505805] kern.module.path=/stand/evbarm/9.99.72/modules [ 3.505805] bwfm0: Firmware file default: brcmfmac43362-sdio.bin [ 3.505805] bwfm0: Firmware file model-spec: brcmfmac43362-sdio.cubietech,cubietruck.bin [ 3.535807] bwfm0: Found Firmware file: brcmfmac43362-sdio.bin [ 3.545808] bwfm0: NVRAM file default: brcmfmac43362-sdio.txt [ 3.545808] bwfm0: NVRAM file model-spec: brcmfmac43362-sdio.cubietech,cubietruck.txt [ 3.545808] bwfm0: Found NVRAM file: brcmfmac43362-sdio.cubietech,cubietruck.txt [ 4.995849] sunximmc1: WARNING: driver submitted a command while the controller was busy [ 5.013334] sdmmc1: extended I/O error 16, r=40992 p=0xc3ee7eac l=4 read [ 5.110007] bwfm0: CHIPACTIVE [ 5.120012] bwfm0: wl0: May 16 2018 23:42:49 version 5.90.244 FWID 01-0 [ 5.120012] bwfm0: address [_MAC_XXXXXXXXXX] [ 5.140012] init: copying out path `/sbin/init' 11