Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-09-12 15:51:06
From: spork
Description: HP MicroServer Gen 8 w/addl 2x10Gb Supermicro card
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p9 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1220L V2 @ 2.30GHz (2294.84-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16600838144 (15831 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20181213/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20181213/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20181213/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20181213/tbfadt-850)
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 3 2
Timecounter "TSC-low" frequency 1147419659 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x4000-0x401f mem 0xfab80000-0xfabfffff,0xfab70000-0xfab73fff irq 16 at device 0.0 on pci1
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 2 RX queues 2 TX queues
ix0: Using MSI-X interrupts with 3 vectors
ix0: allocated for 2 queues
ix0: allocated for 2 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 2/2048, RX 2/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x4020-0x403f mem 0xfaa80000-0xfaafffff,0xfaa70000-0xfaa73fff irq 17 at device 0.1 on pci1
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 2 RX queues 2 TX queues
ix1: Using MSI-X interrupts with 3 vectors
ix1: allocated for 2 queues
ix1: allocated for 2 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 2/2048, RX 2/2048
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfacf0000-0xfacf03ff irq 21 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0:3:0:0: failed to read VPD data.
bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xfa9f0000-0xfa9fffff,0xfa9e0000-0xfa9effff,0xfa9d0000-0xfa9dffff irq 16 at device 0.0 on pci4
bge0: APE FW version: NCSI v1.3.16.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
pci0:3:0:1: failed to read VPD data.
bge1: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0xfa9c0000-0xfa9cffff,0xfa9b0000-0xfa9bffff,0xfa9a0000-0xfa9affff irq 17 at device 0.1 on pci4
bge1: APE FW version: NCSI v1.3.16.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfbff0000-0xfbff1fff irq 18 at device 0.0 on pci5
xhci0: 64 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table
usbus1 on xhci0
usbus1: 5.0Gbps Super Speed USB v3.0
pcib6: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbee0000-0xfbee3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci6
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 on pci6
usbus2 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xface0000-0xface03ff irq 20 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
pcib7: <PCI-PCI bridge> at device 30.0 on pci0
pci7: <PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x10c0-0x10c7,0x10c8-0x10cb,0x10d0-0x10d7,0x10d8-0x10db,0x10e0-0x10ff mem 0xfacd0000-0xfacd07ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> at channel 2147483647 on ahci0
device_attach: ahciem0 attach returned 6
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff pnpid ORM0000 on isa0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 214e00002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 214e00002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 214e00002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 214e00002100
device_attach: est3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen1.1: <0x1912 XHCI root HUB> at usbus1
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen2.1: <HP UHCI root HUB> at usbus2
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1ER162 CC45> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub2: 2 ports with 2 removable, self powered
uhub0: 6 ports with 6 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus0
ugen3.2: <vendor 0x8087 product 0x0024> at usbus3
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub5 on uhub3
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus3 usbus0
uhub5: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3 usbus0
ugen3.3: <vendor 0x0424 product 0x2660> at usbus3
uhub6 on uhub4
uhub6: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus3
ugen0.3: <vendor 0x03f0 HP USB Keyboard> at usbus0
ukbd0 on uhub5
ukbd0: <vendor 0x03f0 HP USB Keyboard, class 0/0, rev 1.10/2.07, addr 3> on usbus0
kbd2 at ukbd0
uhub6: 2 ports with 1 removable, self powered
lo0: link state changed to UP
bge0: link state changed to DOWN
uhid0 on uhub5
uhid0: <vendor 0x03f0 HP USB Keyboard, class 0/0, rev 1.10/2.07, addr 3> on usbus0
bge0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)