Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2020-09-22 12:01:23
From: nullnilaki
Description: NetBSD/alpha 9.99.73 on AlphaServer DS25
P00>>>boot dka0
Initializing...
OpenVMS PALcode V1.98-43, Tru64 UNIX PALcode V1.92-33
*** keyboard not plugged in...
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 222000 heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 1000 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
2048 MB of System Memory
Testing Memory
...
probe I/O subsystem
Hose 0 - PCI bus running at 33Mhz
entering idle loop
Hose 1 - PCI bus running at 66Mhz
Hose 2 - PCI bus running at 66Mhz
Hose 3 - PCI bus running at 66Mhz
starting drivers
*** Warning - No AC detected on Power Supply 2 ***
starting console on CPU 1
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 1 speed is 1000 MHz
create powerup
initializing GCT/FRU at 24a000
Initializing ega dqa dqb eia pga open fibre pga0.0.0.2.1
pgb open fibre pgb0.0.0.2.3
pka pkb
Memory Testing and Configuration Status
Array Size Base Address Intlv Mode
--------- ---------- ---------------- ----------
0 2048Mb 0000000000000000 1-Way
2048 MB of System Memory
Testing the System
Testing the Disks (read only)
pga0.0.0.2.1 Link is down.
Testing the Network
pgb0.0.0.2.3 Link is down.
AlphaServer DS25 Console V7.1-2, built on Dec 7 2005 at 15:28:44
CPU 0 booting
(boot dka0.0.0.1.2 -flags A)
block 0 of dka0.0.0.1.2 is a valid boot block
reading 13 blocks from dka0.0.0.1.2
bootstrap code read in
base = 31a000, image_start = 0, image_bytes = 1a00(6656)
initializing HWRPB at 2000
initializing page table at 7fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
NetBSD/alpha 9.99.73 FFS Primary Bootstrap
Jumping to entry point...
NetBSD/alpha 9.99.73 Secondary Bootstrap, Revision 1.13 (Sun Sep 20 02:20:32 UTC 2020)
VMS PAL rev: 0x2002b00010162
OSF PAL rev: 0x200210002015c
Switch to OSF PAL code succeeded.
Boot flags: A
12849920+247456 [645744+432007]=0xd852f0
Entering netbsd at 0xfffffc0000a01340...
[ 1.0000000] consinit: not using prom console
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 9.99.73 (GENERIC-$Revision: 1.407 $) #1: Sun Sep 20 02:36:34 UTC 2020
[ 1.0000000] naruaki@:/usr/obj.alpha/sys/arch/alpha/compile/GENERIC
[ 1.0000000] AlphaServer DS25, 1000MHz, s/n AY25202439
[ 1.0000000] 8192 byte page size, 2 processors.
[ 1.0000000] total memory = 2048 MB
[ 1.0000000] (3248 KB reserved for PROM, 2044 MB used by NetBSD)
[ 1.0000000] avail memory = 2002 MB
[ 1.0000000] entropy: no seed from bootloader
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264C-5
[ 1.0000000] cpu0: Architecture extensions: 0x1307<PAT,MVI,CIX,FIX,BWX>
[ 1.0000000] cpu1 at mainbus0: ID 1, 21264C-5
[ 1.0000000] cpu1: Architecture extensions: 0x1307<PAT,MVI,CIX,FIX,BWX>
[ 1.0000000] tsc0 at mainbus0: 21274 Core Logic Chipset, Cchip rev 0
[ 1.0000000] tsc0: 8 Dchips, 2 memory buses of 32 bytes
[ 1.0000000] tsc0: arrays present: 2048MB, 0MB, 0MB, 0MB, Dchip 0 rev 1
[ 1.0000000] tsp0 at tsc0
[ 1.0000000] pci0 at tsp0 bus 0
[ 1.0000000] sio0 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge (rev. 0xc3)
[ 1.0000000] fxp0 at pci0 dev 8 function 0: Intel i82559ER Ethernet (rev. 0x09)
[ 1.0000000] fxp0: interrupting at dec 6600 irq 20
[ 1.0000000] fxp0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
[ 1.0000000] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0000000] Digital Equipment product 0018 (miscellaneous network, revision 0x25) at pci0 dev 10 function 0 not configured
[ 1.0000000] Compaq product a0f7 (PCI Hot-Plug system, revision 0x12) at pci0 dev 12 function 0 not configured
[ 1.0000000] aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1)
[ 1.0000000] aceride0: primary channel interrupting at isa irq 14
[ 1.0000000] atabus0 at aceride0 channel 0
[ 1.0000000] aceride0: secondary channel interrupting at isa irq 15
[ 1.0000000] atabus1 at aceride0 channel 1
[ 1.0000000] isa0 at sio0
[ 1.0000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[ 1.0000000] com0: console
[ 1.0000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
[ 1.0000000] pckbc0 at isa0 port 0x60-0x64
[ 1.0000000] attimer0 at isa0 port 0x40-0x43
[ 1.0000000] pcppi0 at isa0 port 0x61
[ 1.0000000] spkr0 at pcppi0: PC Speaker
[ 1.0000000] wsbell at spkr0 not configured
[ 1.0000000] midi0 at pcppi0: PC speaker
[ 1.0000000] isabeep0 at pcppi0
[ 1.0000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[ 1.0000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[ 1.0000000] attimer0: attached to pcppi0
[ 1.0000000] tsp1 at tsc0
[ 1.0000000] pci1 at tsp1 bus 0
[ 1.0000000] ahc0 at pci1 dev 1 function 0: Adaptec aic7899 Ultra160 SCSI adapter
[ 1.0000000] ahc0: interrupting at dec 6600 irq 0
[ 1.0000000] ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 1.0000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[ 1.0000000] ahc1 at pci1 dev 1 function 1: Adaptec aic7899 Ultra160 SCSI adapter
[ 1.0000000] ahc1: interrupting at dec 6600 irq 1
[ 1.0000000] ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[ 1.0000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[ 1.0000000] bge0 at pci1 dev 5 function 0: Broadcom BCM5703X Gigabit Ethernet
[ 1.0000000] bge0: interrupting at dec 6600 irq 4
[ 1.0000000] bge0: HW config 00000014, 00000000, 00000000, 00000000 00000000
[ 1.0000000] bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
[ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] tsp2 at tsc0
[ 1.0000000] pci2 at tsp2 bus 0
[ 1.0000000] Emulex LP9000 FibreChannel Adapter (Fiber Channel serial bus, revision 0x01) at pci2 dev 2 function 0 not configured
[ 1.0000000] tsp3 at tsc0
[ 1.0000000] pci3 at tsp3 bus 0
[ 1.0000000] Emulex LP9000 FibreChannel Adapter (Fiber Channel serial bus, revision 0x01) at pci3 dev 2 function 0 not configured
[ 1.0000000] Compaq product a0f7 (PCI Hot-Plug system, revision 0x12) at pci3 dev 6 function 0 not configured
[ 1.0000000] tsciic0 at tsc0
[ 1.0000000] iic0 at tsciic0: I2C bus
[ 1.0000000] entropy: WARNING: extracting entropy too early
[ 1.3450744] stray isa irq 14
[ 1.5042582] scsibus0: waiting 2 seconds for devices to settle...
[ 1.5748408] atapibus0 at atabus0: 2 targets
[ 1.6263313] scsibus1: waiting 2 seconds for devices to settle...
[ 1.7015280] cd0 at atapibus0 drive 0: <HL-DT-ST GCE-8320B, , 2.04> cdrom removable
[ 5.3760999] sd0 at scsibus0 target 0 lun 0: <COMPAQ, BD3008A4C6, HPB4> disk fixed
[ 5.4669220] sd0: 279 GB, 90774 cyl, 8 head, 806 sec, 512 bytes/sect x 585937500 sectors
[ 5.5636039] sd0: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing
[ 13.1077219] root on sd0a dumps on sd0b
[ 13.1624090] root file system type: ffs
[ 13.2092852] kern.module.path=/stand/alpha/9.99.73/modules
Wed Mar 4 09:32:42 UTC 2065
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
[ 17.0580077] cd0: no disk label
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
rn[ 17.3929761] entropy: WARNING: consolidating less than full entropy
[ 17.3929761] stray isa irq 4
dctl: no entropy in seed
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Building databases: dev, utmp, utmpx, services.
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
[ 20.5951950] cd0: no disk label
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
/usr/sbin/postconf: warning: valid_hostname: empty hostname
/usr/sbin/postconf: fatal: unable to use my own hostname
Starting postfix.
Mar 4 09:32:51 postfix[1306]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Wed Mar 4 09:32:53 UTC 2065
NetBSD/alpha (Amnesiac) (constty)
login: root
Mar 4 09:33:50 login: ROOT LOGIN (root) on tty constty
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.73 (GENERIC-$Revision: 1.407 $) #1: Sun Sep 20 02:36:34 UTC 2020
Welcome to NetBSD!
This system is running a development snapshot of the NetBSD operating system,
also known as NetBSD-current. It is very possible that it has serious bugs,
regressions, broken features or other problems. Please bear this in mind
and use the system with care.
You are encouraged to test this version as thoroughly as possible. Should you
encounter any problem, please report it back to the development team using the
send-pr(1) utility (requires a working MTA). If yours is not properly set up,
use the web interface at: https://www.NetBSD.org/support/send-pr.html
Thank you for helping us test and improve NetBSD.
We recommend that you create a non-root account and use su(1) for root access.
#