Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2020-10-12 19:56:05
From: erj
Description: PowerMac 3,6 G4
[ using 1142388 bytes of bsd ELF symbol table ] console out [ATY,Pheonix_A] console in [keyboard], using USB using parent ATY,PheonixParent:: memaddr 98000000, size 8000000 : consaddr 9c008000 : ioaddr 90020000, size 20000: width 1280 linebytes 1280 height 1024 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.7 (GENERIC.MP) #724: Fri May 8 11:53:16 MDT 2020 xxx@xxx.xxx:/usr/src/sys/arch/macppc/compile/GENERIC.MP real mem = 2147483648 (2048MB) avail mem = 2071257088 (1975MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: model PowerMac3,6 cpu0 at mainbus0: 7455 (Revision 0x303): 1416 MHz: 256KB L2 cache, 2MB L3 cache cpu1 at mainbus0: 7455 (Revision 0x303): 1416 MHz: 256KB L2 cache, 2MB L3 cache mem0 at mainbus0 spdmem0 at mem0: 512MB DDR SDRAM non-parity PC2700CL2.5 spdmem1 at mem0: 512MB DDR SDRAM non-parity PC3200CL3.0 spdmem2 at mem0: 512MB DDR SDRAM non-parity PC2700CL2.5 spdmem3 at mem0: 512MB DDR SDRAM non-parity PC3200CL3.0 memc0 at mainbus0: uni-n rev 0x24 kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 admtmp0 at iic0 addr 0x2c "cy2213" at iic0 addr 0x65 not configured lmtemp0 at iic0 addr 0x49: ds1775 mpcpcibr0 at mainbus0 pci: uni-north pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 agp at pchb0 not configured radeondrm0 at pci0 dev 16 function 0 "ATI Radeon 9000" rev 0x01 drm0 at radeondrm0 radeondrm0: irq 48 mpcpcibr1 at mainbus0 pci: uni-north pci1 at mpcpcibr1 bus 0 macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE macgpio0 at macobio0 offset 0x50 macgpio1 at macgpio0 offset 0x9: irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured "gpio5" at macgpio0 offset 0x6f not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "gpio6" at macgpio0 offset 0x70 not configured "extint-gpio16" at macgpio0 offset 0x68 not configured "extint-gpio14" at macgpio0 offset 0x66 not configured "gpio12" at macgpio0 offset 0x76 not configured "gpio11" at macgpio0 offset 0x75 not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "extint-gpio4" at macgpio0 offset 0x5c not configured "gpio11" at macgpio0 offset 0x75 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zs0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zs0 channel 0 zstty1 at zs0 channel 1 snapper0 at macobio0 offset 0x10000: irq 30,1,2 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000 apm0 at adb0: battery flags 0x9, 0% charged piic0 at adb0 iic1 at piic0 "cy28506" at iic1 addr 0xea not configured "pck2059" at iic1 addr 0xe4 not configured kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x1f000 irq 19: DMA wdc1 at macobio0 offset 0x20000 irq 20: DMA atapiscsi0 at wdc1 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-105, A506> removable cd0(wdc1:0:0): using BIOS timings, DMA mode 2 audio0 at snapper0 ohci0 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 ohci1 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north pci2 at mpcpcibr2 bus 0 kauaiata0 at pci2 dev 13 function 0 "Apple Uni-N ATA" rev 0x00 wdc2 at kauaiata0 irq 39: DMA wd0 at wdc2 channel 0 drive 0: <HDT722525DLAT80> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(wdc2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 "Apple UniNorth Firewire" rev 0x01 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x00: irq 41, address xx:xx:xx:xx:xx:xx brgphy0 at gem0 phy 0: BCM5421 10/100/1000baseT PHY, rev. 1 uhub2 at uhub0 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in Apple Extended USB Keyboard" rev 1.10/1.22 addr 2 uhidev0 at uhub2 port 1 configuration 1 interface 0 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard uhidev1 at uhub2 port 1 configuration 1 interface 1 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/1.22 addr 3 uhidev1: iclass 3/0, 3 report ids uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 uhub3 at uhub0 port 2 configuration 1 interface 0 "Apple Computer product 0x9117" rev 1.10/1.10 addr 4 uhidev2 at uhub3 port 3 configuration 1 interface 0 "Apple Computer product 0x9217" rev 1.00/2.10 addr 5 uhidev2: iclass 3/0, 228 report ids uhid2 at uhidev2 reportid 2: input=0, output=0, feature=255 uhid3 at uhidev2 reportid 16: input=0, output=0, feature=2 uhid4 at uhidev2 reportid 214: input=0, output=0, feature=2 uhid5 at uhidev2 reportid 228: input=2, output=0, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd root on wd0a (9fce02a003ce589e.a) swap on wd0b dump on wd0b WARNING: clock gained 3 days WARNING: CHECK AND RESET THE DATE! initializing kernel modesetting (RV250 0x1002:0x4966 0x1002:0x4966 0x01). radeondrm0: 1280x1024, 32bpp wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present