Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-11-04 12:15:46
From: dan
Description: FreeBSD/amd64 on RIOWORKS HDAMA
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p10 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: AMD Opteron(tm) Processor 246 (2004.59-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0xf5a  Family=0xf  Model=0x5  Stepping=10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
real memory  = 8589934592 (8192 MB)
avail memory = 8164978688 (7786 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
random: unblocking device.
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD 	 XSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x75 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ohci0: <OHCI (generic) USB controller> mem 0xf8100000-0xf8100fff irq 19 at device 0.0 on pci1
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ohci1: <OHCI (generic) USB controller> mem 0xf8101000-0xf8101fff irq 19 at device 0.1 on pci1
usbus1 on ohci1
usbus1: 12Mbps Full Speed USB v1.0
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xf9000000-0xf9ffffff,0xf8102000-0xf8102fff irq 18 at device 6.0 on pci1
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1020-0x102f at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
3ware device driver for 9000 series storage controllers, version: xxx.xxx.xxx.xxx
twa0: <3ware 9000 series Storage Controller> port 0x3000-0x303f mem 0xfc000000-0xfdffffff,0xfa020000-0xfa020fff irq 26 at device 2.0 on pci2
twa0: INFO: (0x04: 0x0053): Battery capacity test is overdue: 
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9550SX-8LP, 8 ports, Firmware FE9X xxx.xxx.xxx.xxx, BIOS BE9X xxx.xxx.xxx.xxx
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x001002> mem 0xfa000000-0xfa00ffff irq 27 at device 3.0 on pci2
bge0: enabling MBOX workaround for AMD-8131 PCI-X Bridge
bge0: CHIP ID 0x00001002; ASIC REV 0x01; CHIP REV 0x10; PCI on PCI-X 66 MHz; 32bit
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: xx:xx:xx:xx:xx:xx
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x001002> mem 0xfa010000-0xfa01ffff irq 27 at device 4.0 on pci2
bge1: enabling MBOX workaround for AMD-8131 PCI-X Bridge
bge1: CHIP ID 0x00001002; ASIC REV 0x01; CHIP REV 0x10; PCI on PCI-X 66 MHz; 32bit
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 1000BASE-T media interface> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: xx:xx:xx:xx:xx:xx
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 4 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xcb000-0xccfff pnpid ORM0000 on isa0
powernow0: <Cool`n'Quiet K8> on cpu0
Timecounters tick every 1.000 msec
ugen0.1: <AMD OHCI root HUB> at usbus0
ugen1.1: <AMD OHCI root HUB> at usbus1
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
da0 at twa0 bus 0 scbus2 target 0 lun 0
da0: <AMCC 9550SX-8LP DISK 3.08> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number xxxxxxxx
da0: 100.000MB/s transfers
da0: 200241MB (410093568 512 byte sectors)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <MITSUMI CD-ROM SR244W T01A> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da0s1a [rw]...
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
gif0: link state changed to UP
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
pflog0: promiscuous mode enabled
CPU: AMD Opteron(tm) Processor 246 (2004.59-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0xf5a  Family=0xf  Model=0x5  Stepping=10
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>