Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-11-12 17:29:17
From: tsutsui
Description: NetBSD/zaurus 9.1 on SHARP SL-C3000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/zaurus/compile/GENERIC total memory = 65536 KB avail memory = 57924 KB timecounter: Timecounters tick every 10.000 msec mainbus0 (root) cpu0 at mainbus0 core 0: PXA27x step C-0 (XScale V5TE core) cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu0: 32KB/32B 32-way L1 VIVT Instruction cache cpu0: 32KB/32B 32-way write-back-locking L1 VIVT Data cache pxaip0 at mainbus0: Onchip Peripheral Bus pxaip0: CPU clock = 416.001 MHz pxaip0: kernel is configured for PXA250 and PXA270, cpu type is PXA270 pxaintc0 at pxaip0 addr 0x40d00000-0x40d0001f: Interrupt Controller pxagpio0 at pxaip0 addr 0x40e00000-0x40e0014f: GPIO Controller pxagpio0: no GPIO configured in kernel com0 at pxaip0 addr 0x40100000-0x4010001f intr 22: ns16550a, working fifo com1 at pxaip0 addr 0x40200000-0x4020001f intr 21: ns16550a, working fifo com2 at pxaip0 addr 0x40700000-0x4070001f intr 20: ns16550a, working fifo ohci0 at pxaip0 addr 0x4c000000-0x4c00006f intr 3 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 saost0 at pxaip0 addr 0x40a00000-0x40a0001f saost0: SA-11x0 OS Timer lcd0 at pxaip0: PXA2x0 LCD controller lcd0: console wsdisplay0 at lcd0 kbdmux 1: console (std, vt100 emulation) wsmux1: connecting to wsdisplay0 pxadmac0 at pxaip0 addr 0x40000000-0x400002ff intr 25: DMA Controller pxapcic0 at pxaip0: 2 slots pcmcia0 at pxapcic0 pcmcia1 at pxapcic0 pxartc0 at pxaip0 addr 0x40900000-0x4090000f: Real-time Clock pxamci0 at pxaip0 addr 0x41100000-0x41100047: MMC/SD Controller pxamci0: using DMA transfer sdmmc0 at pxamci0 ziic0 at pxaip0 addr 0x40300000-0x403016a3: I2C controller iic0 at ziic0: I2C bus zaudio0 at iic0 addr 0x1b: I2S, WM8750 Audio audio0 at zaudio0: playback, capture, half duplex audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured scoop0 at pxaip0: PCMCIA/GPIO controller scoop1 at pxaip0: PCMCIA/GPIO controller zssp0 at pxaip0 lcdctl0 at zssp0 ztp0 at zssp0 wsmouse0 at ztp0 mux 0 zkbd0 at pxaip0 wskbd0 at zkbd0: console keyboard, using wsdisplay0 zrc0 at pxaip0: CE-RH2 remote control wskbd1 at zrc0 mux 1 wskbd1: connecting to wsdisplay0 zapm0 at pxaip0: pseudo power management module apmdev0 at zapm0: Power Management spec V1.2 zusb0 at pxaip0: USB Mode detection timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 clock: hz=100 stathz=64 timecounter: Timecounter "saost_count" frequency 3250000 Hz quality 100 wdc0 at pcmcia0 function 0: <HITACHI, microdrive> wdc0: i/o mapped mode uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered sdmmc0: direct I/O error 8, r=6 p=0xc573cf2c write ld0 at sdmmc0: <0x74:0x4a60:USDU1:0x20:0x39003eca:0x0fc> ld0: 30560 MB, 7761 cyl, 128 head, 63 sec, 512 bytes/sect x 62586880 sectors ld0: 4-bit width, 19.500 MHz atabus0 at wdc0 channel 0 wdc1 at pcmcia1 function 0: <TRANSCEND, TS8GCF133, > wdc1: i/o mapped mode atabus1 at wdc1 channel 0 wd0 at atabus0 drive 0 wd0: <HMS360404D5CF00> wd0: drive supports 32-sector PIO transfers, LBA addressing wd0: 3906 MB, 7936 cyl, 16 head, 63 sec, 512 bytes/sect x 7999488 sectors wd0: drive supports PIO mode 4wd1 at atabus1 drive 0 wd1: <TS8GCF133> wd1: drive supports 1-sector PIO transfers, LBA48 addressing wd1: 7647 MB, 15538 cyl, 16 head, 63 sec, 512 bytes/sect x 15662304 sectors wd1: drive supports PIO mode 4boot device: ld0 root on ld0a dumps on ld0b root file system type: ffs kern.module.path=/stand/zaurus/9.1/modules