Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-11-13 22:10:05
From: neirac
Description: itronix gobook vr-2
OpenBSD 6.8-current (GENERIC) #167: Wed Nov 11 20:27:37 MST 2020
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 3192696832 (3044MB)
avail mem = 3080802304 (2938MB)
User Kernel Config
UKC> disable acpi
453 acpi0 disabled
UKC> disable mpbios
53 mpbios0 disabled
UKC> quit
Continuing...
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe24a0 (28 entries)
bios0: vendor INSYDE version "124" date 04/02/2008
bios0: Itronix IX605
acpi at bios0 not configured
mpbios at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz, 2193.21 MHz, 06-0f-0b
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06170b2b06000b2b
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2193 MHz: speeds: 2200, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0: irq 11, I965GM, gen 4
"Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: irq 11
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: irq 10
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: irq 11
azalia0: codecs: Realtek ALC883, Motorola/0x3055, using Realtek ALC883
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: irq 11
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: irq 11
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x13, Yukon-2 EC Ultra rev. A1 (0x2): irq 11
msk0 at mskc0 port A: address [_MAC_XXXXXXXXXX]
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: irq 11
pci4 at ppb3 bus 4
iwn0 at pci4 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: irq 11, MIMO 2T3R, MoW1, address [_MAC_XXXXXXXXXX]
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: irq 11
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: irq 11
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: irq 11
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: irq 11
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 5
cbb0 at pci5 dev 6 function 0 "TI PCI7XX1 CardBus" rev 0x00: irq 11
"TI PCI7XX1 FireWire" rev 0x00 at pci5 dev 6 function 2 not configured
"TI PCI7XX1 Smart Card" rev 0x00 at pci5 dev 6 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x10, lattimer 0x84
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS541680J9SA00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DV-W28E-R, W.0A> removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2, 0x92a0b1 0x200000 0x0 0xa04719 0x0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX (using slow L1TF mitigation)
uaudio0 at uhub4 port 1 configuration 1 interface 1 "Creative Technology SB X-Fi Surround 5.1" rev 1.10/1.00 addr 2
uaudio0: class v1, full-speed, async, channels: 6 play, 2 rec, 0 ctls
audio1 at uaudio0
uhub7 at uhub4 port 2 configuration 1 interface 0 "PI Engineering Kinesis Keyboard Hub" rev 1.10/3.20 addr 3
uhidev0 at uhub7 port 2 configuration 1 interface 0 "P.I. Engineering product 0x0007" rev 1.10/3.20 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
uhidev1 at uhub7 port 2 configuration 1 interface 1 "P.I. Engineering product 0x0007" rev 1.10/3.20 addr 4
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhub7: device problem, disabling port 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (e32990865d8e7fc1.a) swap on wd0b dump on wd0b
inteldrm0: 1024x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwn0: fatal firmware error