Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-11-18 14:53:36
From: tsutsui
Description: NetBSD/evbarm (earmv5) 9.1 on HP T5325 Thin Client
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.1 (HPT5325) #2: Wed Nov 18 19:59:51 JST 2020 tsutsui@mirage:/s/netbsd-9/src/sys/arch/evbarm/compile/HPT5325 total memory = 512 MB avail memory = 495 MB timecounter: Timecounters tick every 10.000 msec mainbus0 (root) cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core) cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu0: 16KB/32B 4-way L1 VIVT Instruction cache cpu0: 16KB/32B 4-way write-back-locking-C L1 VIVT Data cache mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1 Kirkwood mvsoc0: CPU Clock 1200.000 MHz SysClock 400.000 MHz TClock 200.000 MHz mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer mvsocgpp at mvsoc0 unit 0 not configured mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo com0: console com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface ehci0: EHCI version 1.0 usb0 at ehci0: USB revision 2.0 gtidmac at mvsoc0 unit 0 not configured gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller iic0 at gttwsi0: I2C bus mvcesa at mvsoc0 unit 0 not configured mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller mvgbe0 at mvgbec0 port 0 irq 11 mvgbe0: Ethernet address [_MAC_XXXXXXXXXX] ukphy0 at mvgbe0 phy 8: Marvell 88E1118 Gigabit PHY (OUI 0x000ac2, model 0x0022), rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller mvgbe at mvgbec1 port 0 not configured mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface extent_alloc(0xc2a5b4d8, 0x4000000, 0x4) returned 35 extent `pexmem' (0xe0000000 - 0xe0ffffff), flags = 0x0 PCI: bus 0, device 1, function 0: Failed to allocate PCI memory space (67108864 req) PCI bus configuration failed: unable to assign all I/O and memory ranges. pci0 at mvpex0 pci0: i/o space, memory space enabled vendor 11ab product 6281 (miscellaneous memory, revision 0x03) at pci0 dev 0 function 0 not configured vendor 18ca product 0027 (VGA display) at pci0 dev 1 function 0 not configured mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC) mvsata0: GenIIe, 1hc, 2port/hc atabus0 at mvsata0 channel 0 atabus1 at mvsata0 channel 1 mvsdio at mvsoc0 unit 0 not configured timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mvsoctmr0" frequency 200000000 Hz quality 100 uhub0 at usb0: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered mvsata0 port 0: device present, speed: 1.5Gb/s mvsata0 port 1: device present, speed: 3.0Gb/s wd0 at atabus0 drive 0 wd0: <SM224> wd0: drive supports 1-sector PIO transfers, LBA addressing wd0: 463 MB, 942 cyl, 16 head, 63 sec, 512 bytes/sect x 949536 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(mvsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus1 drive 0 wd1: <WDC WD800JD-75MSA3> wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) wd1(mvsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) uhub1 at uhub0 port 1: SMSC (0x424) USB 2.0 4-Port Hub (0x2514), class 9/0, rev 2.00/0.00, addr 2 uhub1: multiple transaction translators uhub1: 4 ports with 4 removable, self powered boot device: <unknown> root device: wd1 dump device (default wd1b): file system (default generic): root on wd1a dumps on wd1b root file system type: ffs kern.module.path=/stand/evbarm/9.1/modules init path (default /sbin/init): init: trying /sbin/init