Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2020-11-27 02:54:02
From: jklos
Description: Plextor PX-EH25L
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.1_STABLE (GENERIC) #0: Wed Nov 25 21:35:58 UTC 2020 [ 1.000000] [_EMAIL_XXXXXXXX]:/usr/obj-landisk/sys/arch/landisk/compile/GENERIC [ 1.000000] Model: I-O DATA LANDISK [ 1.000000] total memory = 65536 KB [ 1.000000] avail memory = 59676 KB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0: SH4 266.666 MHz PCLOCK 33.333 MHz [ 1.000000] cpu0: 8KB/32B direct-mapped Instruction cache. [ 1.000000] cpu0: 16KB/32B direct-mapped Data cache. [ 1.000000] cpu0: U0, P0, P3 write-through; P1 write-through [ 1.000000] cpu0: full-associative 4 ITLB, 64 UTLB entries [ 1.000000] cpu0: multiple virtual storage mode, SQ access: kernel, wired 3 [ 1.000000] shpcic0 at mainbus0: Hitachi SH7751R PCI Controller (host bridge, revision 0x01) [ 1.000000] PCI bus 0: Warning: Total bandwidth exceeded!? (5732712) [ 1.000000] pci0 at shpcic0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] re0 at pci0 dev 0 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20) [ 1.000000] re0: interrupting at irq 5 [ 1.000000] re0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] re0: using 64 tx descriptors [ 1.000000] rlphy0 at re0 phy 0: Realtek internal PHY [ 1.000000] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] acardide0 at pci0 dev 1 function 0: Acard ATP865-A Ultra133 IDE Controller (rev. 0x10) [ 1.000000] acardide0: bus-master DMA support present [ 1.000000] acardide0: primary channel wired to native-PCI mode [ 1.000000] acardide0: using irq 6 for native-PCI interrupt [ 1.000000] atabus0 at acardide0 channel 0 [ 1.000000] acardide0: secondary channel wired to native-PCI mode [ 1.000000] atabus1 at acardide0 channel 1 [ 1.000000] ohci0 at pci0 dev 2 function 0: NEC USB Host Controller (rev. 0x43) [ 1.000000] ohci0: interrupting at irq 7 [ 1.000000] ohci0: OHCI version 1.0 [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] ohci1 at pci0 dev 2 function 1: NEC USB Host Controller (rev. 0x43) [ 1.000000] ohci1: interrupting at irq 8 [ 1.000000] ohci1: OHCI version 1.0 [ 1.000000] usb1 at ohci1: USB revision 1.0 [ 1.000000] ehci0 at pci0 dev 2 function 2: NEC USB2 Host Controller (rev. 0x04) [ 1.000000] ehci0: interrupting at irq 5 [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 [ 1.000000] usb2 at ehci0: USB revision 2.0 [ 1.000000] shb0 at mainbus0 [ 1.000000] scif0 at shb0 [ 1.000000] scif0: console [ 1.000000] rs5c313rtc0 at shb0: RICOH 5C313 real time clock [ 1.000000] obio0 at mainbus0 [ 1.000000] btn0 at obio0 irq 12: USL-5P buttons [ 1.000000] pwrsw0 at obio0 irq 11: Power Switch [ 1.000000] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000009] timecounter: Timecounter "tmu_pclock_4" frequency 8333333 Hz quality 0 [ 1.218480] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.309705] uhub0: 3 ports with 3 removable, self powered [ 1.309705] uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.414345] uhub1: 2 ports with 2 removable, self powered [ 1.414345] uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.518985] uhub2: 5 ports with 5 removable, self powered [ 1.518985] wd0 at atabus0 drive 0 [ 1.562236] wd0: <Hitachi HDS721616PLAT80> [ 1.608979] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 1.609118] wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors [ 1.718489] wd0: 32-bit data port [ 1.718489] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA [ 1.718489] wd0(acardide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT [ 2.405971] boot device: wd0 [ 2.429278] root on wd0a dumps on wd0b [ 2.499725] kern.module.path=/stand/landisk/9.1/modules