Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-12-12 18:21:01
From: tsutsui
Description: NetBSD/hp300 9.1 on HP 9000/382
Self-Test Mode Copyright 1991, Hewlett-Packard Company. All Rights Reserved. BOOTROM Rev. 3.01 2 MAY 91 MC68040 Processor Configuration EEPROM Utility Chip at 41 HP-HIL RESET To Restart Loading Memory Self-Test Mode HP-IB DMA-C0 Testing Memory Self-Test Mode RAM 25165482 Bytes HP98644 (RS-232) at 9 HP PARALLEL at 12 HP98642 (RS-232 MUX) at 13 HP98265 (SCSI S 32) at 14 HP98643 (LAN) at 21, AUI, 080009XXXXXX Bit Mapped Video at 132 (Console) Searching for Selected System Booting System preferred selection Failed System Search Mode :FUJITSU M2952S-512, 1400, 0 1Z SYS_UBOOT Booting System >> NetBSD/hp300 Primary Boot, Revision 1.21 (Sun Oct 18 19:24:30 UTC 2020) (from NetBSD 9.1) >> HP 9000/382 SPU >> Enter "reset" to reset system. Boot: [[[sd0a:]netbsd][-a][-c][-d][-s][-v][-q]] :- 3098620+136628 [371232+243714]=0x3ac3ac Start @ 0xfe803400 [1=0xfeb17db0-0x3ac3ac]... Entry point: 0xfe803400 [ 1.0000000] bootinfo found at 0xfe802000 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/hp300/compile/GENERIC [ 1.0000000] HP 9000/382 (25MHz MC68040 CPU+MMU+FPU, 4k on-chip physical I/D caches) [ 1.0000000] total memory = 24564 KB [ 1.0000000] avail memory = 19564 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] intio0 at mainbus0 [ 1.0000000] rtc0 at intio0 addr 0x420000 [ 1.0000000] frodo0 at intio0 addr 0x41c000 ipl 5 [ 1.0000000] dnkbd at frodo0 offset 0x0 not configured [ 1.0000000] com1 at frodo0 offset 0x40: ns8250 or ns16450, no fifo [ 1.0000000] com2 at frodo0 offset 0x60: ns8250 or ns16450, no fifo [ 1.0000000] hil0 at intio0 addr 0x428000 ipl 1 [ 1.0000000] nhpib1 at intio0 addr 0x478000 ipl 3: internal HP-IB [ 1.0000000] hpibbus1 at nhpib1 [ 1.0000000] dma0 at intio0 addr 0x500000 ipl 1: 98620C, 2 channels, 32-bit DMA [ 1.0000000] dio0 at mainbus0 [ 1.0000000] com0 at dio0 scode 9 ipl 5: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] internal parallel at dio0 scode 12 ipl 3 not configured [ 1.0000000] dcm0 at dio0 scode 13 ipl 3 [ 1.0000000] spc0 at dio0 scode 14 ipl 4: 98265A SCSI, 32-bit DMA, SCSI ID 7 [ 1.0000000] scsibus0 at spc0: 8 targets, 8 luns per target [ 1.0000000] le0 at dio0 scode 21 ipl 5: address [_MAC_XXXXXXXXXX] [ 1.0000000] le0: 8 receive buffers, 2 transmit buffers [ 1.0000000] gendiofb0 at dio0 scode 132 ipl 3: 1024x768x8 frame buffer [ 1.0000000] wsdisplay0 at gendiofb0 kbdmux 1 [ 1.0091340] scsibus0: waiting 2 seconds for devices to settle... [ 2.0486380] hil0: no devices [ 3.0883580] sd0 at scsibus0 target 0 lun 0: <FUJITSU, M2952S-512, 0147> disk fixed [ 3.1182340] sd0: 2291 MB, 5714 cyl, 5 head, 164 sec, 512 bytes/sect x 4693462 sectors [ 3.1404180] sd0: async, 8-bit transfers [ 3.1491980] sd1 at scsibus0 target 1 lun 0: <TEAC, FC-1 HF 07, RV A> disk removable [ 3.1981580] sd1(spc0:0:1:0): not ready, data = 00 00 00 00 04 00 00 00 [ 3.2584940] sd1: drive offline [ 3.2881420] sd1: async, 8-bit transfers [ 4.1077980] sd1(spc0:0:1:0): illegal request, data = 00 00 00 00 20 00 00 00 [ 4.1677620] boot device: sd0 [ 4.1877700] root on sd0a dumps on sd0b [ 4.2777340] root file system type: ffs [ 4.3077540] kern.module.path=/stand/hp300/9.1/modules Sun Dec 13 03:06:45 JST 2020 Starting root file system check: /dev/rsd0a: file system is clean; not checking swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: Loaded entropy from /var/db/entropy-file. Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. Hostname: delica NIS domainname: xxxxxx IPv6 mode: host Configuring network interfaces: le0. Adding interface aliases:. Waiting for DAD to complete for statically configured addresses... Building databases: dev, utmp, utmpx. Starting syslogd. Setting date via ntp. Starting rpcbind. Starting ypbind. ypbind[298]: Domain xxxxxx is alive; server xxx.xxx.xxx.xxx Mounting all file systems... Clearing temporary files. Starting amd. Updating fontconfig cache: done Creating a.out runtime link editor directory cache. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 Starting virecover. Checking for core dump... savecore: no core dump starting local daemons:. Updating motd. Starting ntpd. Dec 13 03:09:49 delica ntpd[406]: mlockall(): Cannot allocate memory Starting sshd. Starting inetd. Starting cron. Sun Dec 13 03:11:15 JST 2020 Dec 13 03:11:19 delica getty[663]: /dev/ttyE0: Device not configured NetBSD/hp300 (delica) (ttyC0) login: