Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-12-15 13:21:11
From: kamada
Description: NetBSD/amd64 9.1 on ASRock J5040-ITX
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC total memory = 32603 MB avail memory = 31630 MB WARNING: module error: module `msdos' pushed by boot loader already exists cpu_rng: RDSEED timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done RTC BIOS diagnostic error 0x3b<config_unit,memory_size,fixed_disk> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 efi: systbl at pa 79a38018 To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.) mainbus0 (root) ACPI: RSDP 0x000000007964B014 000024 (v02 ALASKA) ACPI: XSDT 0x000000007964A728 0000DC (v01 ALASKA A M I 01072009 AMI 01000013) ACPI: FACP 0x00000000795EB000 000114 (v06 ALASKA A M I 01072009 AMI 00010013) ACPI: DSDT 0x00000000795DE000 00C7B3 (v02 ALASKA A M I 01072009 INTL 20160930) ACPI: FACS 0x000000007964D000 000040 ACPI: FPDT 0x00000000795DD000 000044 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FIDT 0x00000000795DC000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: MCFG 0x00000000795ED000 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) ACPI: DBG2 0x00000000795EC000 000072 (v00 INTEL GLK-SOC 00000003 BRXT 0100000D) ACPI: DBGP 0x00000000795DB000 000034 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D) ACPI: HPET 0x00000000795D9000 000038 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D) ACPI: LPIT 0x00000000795D8000 00005C (v01 INTEL GLK-SOC 00000003 BRXT 0100000D) ACPI: APIC 0x00000000795D7000 000084 (v04 INTEL GLK-SOC 00000003 BRXT 0100000D) ACPI: NPKT 0x00000000795D6000 000065 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D) ACPI: SSDT 0x00000000795D1000 003F72 (v02 INTEL DptfTab 00000003 BRXT 0100000D) ACPI: SSDT 0x00000000795CA000 0010B3 (v02 INTEL UsbCTabl 00000003 BRXT 0100000D) ACPI: SSDT 0x00000000795C9000 0009FF (v01 Intel_ Platform 00001000 INTL 20160930) ACPI: AAFT 0x00000000795C8000 0002CE (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) ACPI: SSDT 0x00000000795C7000 000661 (v02 PmRef Cpu0Ist 00003000 INTL 20160930) ACPI: SSDT 0x00000000795C6000 000775 (v02 CpuRef CpuSsdt 00003000 INTL 20160930) ACPI: SSDT 0x00000000795C5000 00035F (v02 PmRef Cpu0Tst 00003000 INTL 20160930) ACPI: SSDT 0x00000000795C4000 0001E6 (v02 PmRef ApTst 00003000 INTL 20160930) ACPI: SSDT 0x00000000795C1000 00286F (v02 SaSsdt SaSsdt 00003000 INTL 20160930) ACPI: TPM2 0x00000000795C0000 000034 (v04 ALASKA A M I 00000001 AMI 00000000) ACPI: DMAR 0x00000000795DA000 0000A8 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D) ACPI: WDAT 0x00000000795BF000 000104 (v01 00000000 00000000) ACPI: WSMT 0x00000000795D5000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: 9 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 120 pins cpu0 at mainbus0 apid 0 cpu0: TSC freq CPUID 1996800000 Hz cpu0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz, id 0x706a8 cpu0: package 0, core 0, smt 0 cpu1 at mainbus0 apid 2 cpu1: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz, id 0x706a8 cpu1: package 0, core 1, smt 0 cpu2 at mainbus0 apid 4 cpu2: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz, id 0x706a8 cpu2: package 0, core 2, smt 0 cpu3 at mainbus0 apid 6 cpu3: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz, id 0x706a8 cpu3: package 0, core 3, smt 0 acpi0 at mainbus0: Intel ACPICA 20190405 acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,01000013> acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF80AC0FADBAC8 000190 (v02 PmRef Cpu0Cst 00003001 INTL 20160930) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF80A4D21ABE08 0001E6 (v02 PmRef ApIst 00003000 INTL 20160930) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF80AC0F9E82E0 0000C9 (v02 PmRef ApCst 00003000 INTL 20160930) acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 19200000 Hz quality 2000 acpiec0 at acpi0 (H_EC, PNP0C09-1): not present SIO1 (PNP0C02) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured LDRC (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 PDRC (PNP0C02) at acpi0 not configured acpivga0 at acpi0 (GFX0): ACPI Display Adapter acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device acpiout15: brightness levels: [1-100] acpivga0: connected output devices: acpivga0: 0x0400 (acpiout15): Unknown Output Device, head 0 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button GPO1 (INT3453) at acpi0 not configured GPO0 (INT3453) at acpi0 not configured GPO2 (INT3453) at acpi0 not configured GPO3 (INT3453) at acpi0 not configured PEPD (INT33A1) at acpi0 not configured TPM (MSFT0101) at acpi0 not configured IETM (INT3400) at acpi0 not configured DPLY (INT3406) at acpi0 not configured TFN1 (INT3404) at acpi0 not configured CHRG (INT3403) at acpi0 not configured TPWR (INT3407) at acpi0 not configured SEN1 (INT3403) at acpi0 not configured SEN2 (INT3403) at acpi0 not configured SEN3 (INT3403) at acpi0 not configured SEN4 (INT3403) at acpi0 not configured acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan acpifan0: autoconfiguration error: failed to initialize acpitz0 at acpi0 (TZ01): cpu0 acpitz0: active cooling level 0: 65.0C acpitz0: levels: critical 95.0 C, passive 95.0 C ACPI: Enabled 6 GPEs in block 00 to 7F pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 8086 product 31f0 (rev. 0x06) vendor 8086 product 318c (miscellaneous DASP, revision 0x06) at pci0 dev 0 function 1 not configured genfb0 at pci0 dev 2 function 0: vendor 8086 product 3184 (rev. 0x06) genfb0: framebuffer at 0x90000000, size 1024x768, depth 32, stride 4096 genfb0: shadow framebuffer enabled, size 3072 KB wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at genfb0 not configured hdaudio0 at pci0 dev 14 function 0: HD Audio Controller hdaudio0: interrupting at msi0 vec 0 hdafg0 at hdaudio0: vendor 10ec product 0892 hdafg0: DAC00 6ch: Speaker [Jack] hdafg0: DAC01 2ch: HP Out [Jack] hdafg0: DIG02 2ch: SPDIF Out [Jack] hdafg0: ADC03 2ch: Line In [Jack], Mic In [Jack] hdafg0: ADC04 2ch: Mic In [Jack] hdafg0: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 audio0 at hdafg0: playback, capture, full duplex, independent audio0: slinear_le:16 6ch 48000Hz, blk 5760 bytes (10ms) for playback audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured hdafg1 at hdaudio0: vendor 8086 product 280d hdafg1: DP00 8ch: Digital Out [Jack] hdafg1: 8ch/0ch 48000Hz PCM16* vendor 8086 product 319a (miscellaneous communications, revision 0x06) at pci0 dev 15 function 0 not configured ahcisata0 at pci0 dev 18 function 0: vendor 8086 product 31e3 (rev. 0x06) ahcisata0: 64-bit DMA ahcisata0: AHCI revision 1.31, 2 ports, 32 slots, CAP 0xe136ff01<PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SSNTF,SNCQ,S64A> ahcisata0: interrupting at msi1 vec 0 atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 1 ppb0 at pci0 dev 19 function 0: vendor 8086 product 31d8 (rev. 0xf6) ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb0: link is x1 @ 2.5GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x07) re0: interrupting at msix2 vec 0 re0: Ethernet address xx:xx:xx:xx:xx:xx re0: using 256 tx descriptors rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb1 at pci0 dev 19 function 1: vendor 8086 product 31d9 (rev. 0xf6) ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok ppb2 at pci0 dev 19 function 2: vendor 8086 product 31da (rev. 0xf6) ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb2: link is x1 @ 2.5GT/s pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok re1 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x15) re1: interrupting at msix3 vec 0 re1: Ethernet address xx:xx:xx:xx:xx:xx re1: using 256 tx descriptors rgephy1 at re1 phy 7: RTL8251 1000BASE-T media interface, rev. 0 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto ppb3 at pci0 dev 19 function 3: vendor 8086 product 31db (rev. 0xf6) ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok ahcisata1 at pci4 dev 0 function 0: vendor 1b21 product 0612 (rev. 0x02) ahcisata1: 64-bit DMA ahcisata1: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xeb32ff81<CCCS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SSS,SSNTF,SNCQ,S64A> ahcisata1: interrupting at msi4 vec 0 atabus2 at ahcisata1 channel 0 atabus3 at ahcisata1 channel 1 xhci0 at pci0 dev 21 function 0: vendor 8086 product 31a8 (rev. 0x06) xhci0: interrupting at msi5 vec 0 xhci0: xHCI version 1.0 usb0 at xhci0: USB revision 3.0 usb1 at xhci0: USB revision 2.0 pcib0 at pci0 dev 31 function 0: vendor 8086 product 31e8 (rev. 0x06) ichsmb0 at pci0 dev 31 function 1: vendor 8086 product 31d4 (rev. 0x06) ichsmb0: interrupting at ioapic0 pin 20 iic0 at ichsmb0: I2C bus isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pcppi0 at isa0 port 0x61 spkr1 at pcppi0: PC Speaker wsbell at spkr1 not configured midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 attimer1: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 1 us, pow 1000 mW acpicpu0: C2: FFH, lat 50 us, pow 10 mW acpicpu0: C3: FFH, lat 150 us, pow 10 mW acpicpu0: P0: FFH, lat 10 us, pow 0 mW, 2001 MHz, turbo boost acpicpu0: P1: FFH, lat 10 us, pow 0 mW, 2000 MHz acpicpu0: P2: FFH, lat 10 us, pow 0 mW, 1900 MHz acpicpu0: P3: FFH, lat 10 us, pow 0 mW, 1800 MHz acpicpu0: P4: FFH, lat 10 us, pow 0 mW, 1700 MHz acpicpu0: P5: FFH, lat 10 us, pow 0 mW, 1600 MHz acpicpu0: P6: FFH, lat 10 us, pow 0 mW, 1500 MHz acpicpu0: P7: FFH, lat 10 us, pow 0 mW, 1400 MHz acpicpu0: P8: FFH, lat 10 us, pow 0 mW, 1300 MHz acpicpu0: P9: FFH, lat 10 us, pow 0 mW, 1200 MHz acpicpu0: P10: FFH, lat 10 us, pow 0 mW, 1100 MHz acpicpu0: P11: FFH, lat 10 us, pow 0 mW, 1000 MHz acpicpu0: P12: FFH, lat 10 us, pow 0 mW, 900 MHz acpicpu0: P13: FFH, lat 10 us, pow 0 mW, 800 MHz acpicpu0: T0: FFH, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: FFH, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: FFH, lat 1 us, pow 0 mW, 75 % acpicpu0: T3: FFH, lat 1 us, pow 0 mW, 63 % acpicpu0: T4: FFH, lat 1 us, pow 0 mW, 50 % acpicpu0: T5: FFH, lat 1 us, pow 0 mW, 38 % acpicpu0: T6: FFH, lat 1 us, pow 0 mW, 25 % acpicpu0: T7: FFH, lat 1 us, pow 0 mW, 13 % coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105 acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105 acpicpu2 at cpu2: ACPI CPU coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105 acpicpu3 at cpu3: ACPI CPU coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 cpu1: TSC freq CPUID 1996800000 Hz cpu2: TSC freq CPUID 1996800000 Hz cpu3: TSC freq CPUID 1996800000 Hz timecounter: Timecounter "TSC" frequency 1996800000 Hz quality 3000 uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 uhub0: 7 ports with 7 removable, self powered uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 uhub1: 9 ports with 9 removable, self powered IPsec: Initialized Security Association Processing. ahcisata0 port 0: device present, speed: 6.0Gb/s ahcisata0 port 1: device present, speed: 6.0Gb/s wd0 at atabus0 drive 0 wd0: <CT500MX500SSD1> wd0: drive supports 1-sector PIO transfers, LBA48 addressing wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors (0 bytes/physsect; first aligned sector: 8) wd0: GPT GUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx dk0 at wd0: "esp", 204800 blocks at 2048, type: msdos dk1 at wd0: "root", 8388608 blocks at 206848, type: ffs dk2 at wd0: "swap", 71303168 blocks at 8595456, type: swap dk3 at wd0: "usr", 811597824 blocks at 79898624, type: ffs dk4 at wd0: "var", 85276672 blocks at 891496448, type: ffs wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) wd1 at atabus1 drive 0 wd1: <WDC WD40EZRZ-00GXCB0> wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 3726 GB, 7752021 cyl, 16 head, 63 sec, 512 bytes/sect x 7814037168 sectors (0 bytes/physsect; first aligned sector: 8) wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO WARNING: 1 error while detecting hardware; check system log. boot device: wd0 root on dk1 dumps on dk2 root file system type: ffs kern.module.path=/stand/amd64/9.1/modules WARNING: ZFS on NetBSD is under development ZFS filesystem version: 5