Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-12-25 18:11:07
From: beheer
Description: FreeBSD/i386 on Dell Computer Corporation OptiPlex 160L
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE r366954 GENERIC i386
FreeBSD clang version 10.0.1 (xxx@xxx.xxx:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2790.77-MHz 686-class CPU)
  Origin="GenuineIntel"  Id=0xf29  Family=0xf  Model=0x2  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNXT-ID,xTPR>
real memory  = 1073741824 (1024 MB)
avail memory = 1014521856 (967 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <DELL   160L   >
random: unblocking device.
ioapic0: MADT APIC ID 1 != hw id 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Timecounter "TSC-low" frequency 1395383410 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0x14c8db0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL 160L   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xe8000000-0xefffffff,0xfeb80000-0xfebfffff irq 16 at device 2.0 on pci0
agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 892k stolen memory
vgapci0: Boot video device
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 23 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfe9fe000-0xfe9fffff irq 17 at device 9.0 on pci1
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100 media interface> PHY 1 on miibus0
bmtphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: xx:xx:xx:xx:xx:xx
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf mem 0xfeb7fc00-0xfeb7ffff irq 18 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xee00-0xeeff,0xedc0-0xedff mem 0xfeb7fa00-0xfeb7fbff,0xfeb7f900-0xfeb7f9ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xcb800-0xccfff,0xcd000-0xcffff pnpid ORM0000 on isa0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from ufs:/dev/ada0s1a [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 usbus3 CAM
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST3320820A 3.AAC> ATA-7 device
ada0: Serial Number xxxxxxxx
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 305245MB (625142448 512 byte sectors)
Root mount waiting for: usbus3
Root mount waiting for: usbus3
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
uhub0: 6 ports with 6 removable, self powered
mountroot: waiting for device /dev/ada0s1a...
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
lo0: link state changed to UP
bfe0: link state changed to DOWN
bfe0: link state changed to UP