Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2020-12-26 02:17:55
From: ad
Description: Compaq Prolinea 4/66
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.99.77 (NODIAG) #0: Sat Dec 26 00:57:27 UTC 2020
[   1.0000000]  xxx@xxx.xxx:/tmp/clean/obj/sys/arch/i386/compile/NODIAG
[   1.0000000] total memory = 52860 KB
[   1.0000000] avail memory = 31032 KB
[   1.0000000] entropy: no seed from bootloader
[   1.0000000] timecounter: Timecounters tick every 10.000 msec
[   1.0000000] Kernelized RAIDframe activated
[   1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[   1.0000030] Generic PC
[   1.0000030] mainbus0 (root)
[   1.0000030] Firmware Error (ACPI): A valid RSDP was not found (20201113/tbxfroot-261)
[   1.0000030] autoconfiguration error: acpi_probe: failed to initialize tables
[   1.0000030] ACPI Error: Could not remove SCI handler (20201113/evmisc-316)
[   1.0000030] cpu0 at mainbus0
[   1.0000030] ACPI Error: AE_BAD_PARAMETER, Thread 3241021248 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20201113/utmutex-326)
[   1.0000030] ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20201113/utmutex-367)
[   1.0000030] cpu0: Use cpuid to serialize rdtsc
[   1.0000030] cpu0: Intel 486-class, id 0x435
[   1.0000030] cpu0: node 0, package 0, core 0, smt 0
[   1.0000030] isa0 at mainbus0
[   1.0000030] lpt0 at isa0 port 0x378-0x37b irq 7
[   1.0000030] ep0 at isa0 port 0x350-0x35f irq 15: 3Com 3C509 Ethernet
[   1.0000030] ep0: address xx:xx:xx:xx:xx:xx, 8KB byte-wide FIFO, 5:3 Rx:Tx split
[   1.0000030] ep0: 10baseT, 10base5, 10base2 (default 10baseT)
[   1.0000030] ne1 at isa0 port 0x300-0x31f irq 10
[   1.0000030] ne1: NE2000 Ethernet
[   1.0000030] ne1: Ethernet address xx:xx:xx:xx:xx:xx
[   1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 1-byte FIFO
[   1.0000030] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 1-byte FIFO
[   1.0000030] pckbc0 at isa0 port 0x60-0x64
[   1.0000030] pckbd0 at pckbc0 (kbd slot)
[   1.0000030] pckbc0: using irq 1 for kbd slot
[   1.0000030] wskbd0 at pckbd0: console keyboard
[   1.0000030] attimer0 at isa0 port 0x40-0x43
[   1.0000030] wdc0 at isa0 port 0x1f0-0x1f7 irq 14
[   1.0000030] atabus0 at wdc0 channel 0
[   1.0000030] vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
[   1.0000030] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
[   1.0000030] wsmux1: connecting to wsdisplay0
[   1.0000030] pcppi0 at isa0 port 0x61
[   1.0000030] midi0 at pcppi0: PC speaker
[   1.0000030] sysbeep0 at pcppi0
[   1.0000030] isapnp0 at isa0 port 0x279
[   1.0000030] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[   1.0000030] attimer0: attached to pcppi0
[   1.0000030] isapnp0: read port 0x203
[   1.0000030] sb1 at isapnp0 port 0x220/16,0x330/2,0x388/4 irq 5 drq 1,3
[   1.0000030] sb1: Creative ViBRA16X PnP Audio: dsp v4.16
[   1.0000030] audio0 at sb1: playback, capture, half duplex, independent
[   1.0000030] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[   1.0000030] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[   1.0000030] mpu0 at sb1
[   1.0000030] midi1 at mpu0: SB MPU-401 MIDI UART
[   1.0000030] opl0 at sb1: model OPL3
[   1.0000030] midi2 at opl0: SB Yamaha OPL3
[   1.0000030] joy0 at isapnp0 port 0x201/1
[   1.0000030] joy0: Creative ViBRA16X PnP Game
[   1.0000030] joy0: joystick not connected
[   1.0000030] entropy: WARNING: extracting entropy too early
[   1.0032632] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[   1.0211037] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
[   1.6711169] IPsec: Initialized Security Association Processing.
[   1.8411018] aes: BearSSL aes_ct
[   1.8411018] chacha: Portable C ChaCha
[   1.8711082] adiantum: self-test passed
[   1.9111155] aes_ccm: self-test passed
[   1.9310680] blake2s: self-test passed
[   4.9111230] wd0 at atabus0 drive 0
[   4.9211282] wd0: <ST380011A>
[   4.9211282] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[   4.9211282] wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
[   4.9811609] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[   4.9911661] cgd: self-test aes-xts-256
[   5.0011805] cgd: self-test aes-xts-512
[   5.0011805] cgd: self-test aes-cbc-128
[   5.0011805] cgd: self-test aes-cbc-256
[   5.0011805] cgd: self-test 3des-cbc-192
[   5.0111597] cgd: self-test blowfish-cbc-448
[   5.0111597] cgd: self-test aes-cbc-128 (encblkno8)
[   5.0211574] cgd: self-tests passed
[   5.1111579] WARNING: 1 error while detecting hardware; check system log.
[   5.1111579] boot device: wd0
[   5.1111579] root on wd0a dumps on wd0b
[   5.1711077] root file system type: ffs