Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-01-02 17:07:31
From: AJM
Description: FreeBSD 13.0-CURRENT 20201224 RPi4b 8GB patch D26853 no2
'Test 6'
U-Boot 2020.10 (Dec 24 2020 - 04:18:29 +0000)
DRAM: 7.9 GiB
RPI 4 Model B (0xd03114)
MMC: mmc@7e300000: 1, emmc2@7e340000: 0
Loading Environment from FAT... In: serial
Out: vidconsole
Err: vidconsole
Net: eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk [_EMAIL_XXXXXXX]...
Disk [_EMAIL_XXXXXXX] not ready
Scanning disk [_EMAIL_XXXXXXXXX]...
** Unrecognized filesystem type **
Found 3 disks
No EFI system partition
BootOrder not defined
EFI boot manager: Cannot load any image
1183548 bytes read in 69 ms (16.4 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Booting /efi\boot\bootaa64.efi
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Dec 24 07:03:20 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXXXX])
Command line arguments: loader.efi
Image base: 0x39e0f000
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8224.4096)
Console: comconsole (0)
Load Path: /efi\boot\bootaa64.efi
Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xe3c2cdc6,0x81f,0x18fa8)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xe3c2cdc6,0x81f,0x18fa8)
Setting currdev to disk0p1:
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,MBR,0xe3c2cdc6,0x197c7,0x5e6821)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=0x2a8 text=0x8861c8 text=0x1f2de4 data=0x19cf50 data=0x0+0x5446f6 syms=[0x8+0x117de0+0x8+0x13cad4]
Loading configured modules...
can't find '/boot/entropy'
can't find '/etc/hostid'
/boot/kernel/umodem.ko text=0x2120 text=0x1390 data=0x6e0+0x10 syms=[0x8+0xf48+0x8+0xb6e]
loading required module 'ucom'
/boot/kernel/ucom.ko text=0x21a0 text=0x2e20 data=0x880+0x858 syms=[0x8+0x11a0+0x8+0xb2c]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 10 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Using DTB provided by EFI at 0x7ef1000.
EFI framebuffer information:
addr, size 0x3e330000, 0x8ca000
dimensions 1920 x 1200
stride 1920
masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Type Physical Virtual #Pages Attr
Reserved 000000000000 0 00000002 WB
ConventionalMemory 000000002000 2000 00007eef WB
ACPIReclaimMemory 000007ef1000 7ef1000 0000001e WB
ConventionalMemory 000007f0f000 7f0f000 00029efe WB
BootServicesData 000031e0d000 31e0d000 00000001 WB
LoaderData 000031e0e000 31e0e000 00008001 WB
LoaderCode 000039e0f000 39e0f000 00000121 WB
Reserved 000039f30000 39f30000 00000007 WB
BootServicesData 000039f37000 39f37000 00000001 WB
RuntimeServicesData 000039f38000 39f38000 00000001 WB RUNTIME
BootServicesData 000039f39000 39f39000 00000002 WB
Reserved 000039f3b000 39f3b000 00000001 WB
RuntimeServicesData 000039f3c000 39f3c000 00000003 WB RUNTIME
BootServicesData 000039f3f000 39f3f000 00000001 WB
RuntimeServicesData 000039f40000 39f40000 00000004 WB RUNTIME
Reserved 000039f44000 39f44000 00000001 WB
BootServicesData 000039f45000 39f45000 00000001 WB
Reserved 000039f46000 39f46000 00000001 WB
BootServicesData 000039f47000 39f47000 00000002 WB
Reserved 000039f49000 39f49000 00000001 WB
BootServicesData 000039f4a000 39f4a000 00000002 WB
LoaderData 000039f4c000 39f4c000 00001404 WB
RuntimeServicesCode 00003b350000 3b350000 00000010 WB RUNTIME
LoaderData 00003b360000 3b360000 000000a0 WB
BootServicesData 000040000000 40000000 000bc000 WB
MemoryMappedIO 0000fe100000 fe100000 00000001 RUNTIME
BootServicesData 000100000000 100000000 00100000 WB
Physical memory chunk(s):
0x00002000 - 0x07ef0fff, 126 MB ( 32495 pages)
0x07f0f000 - 0x39f2ffff, 800 MB ( 204833 pages)
0x39f37000 - 0x39f3afff, 0 MB ( 4 pages)
0x39f3c000 - 0x39f43fff, 0 MB ( 8 pages)
0x39f45000 - 0x39f45fff, 0 MB ( 1 pages)
0x39f47000 - 0x39f48fff, 0 MB ( 2 pages)
0x39f4a000 - 0x3b34ffff, 20 MB ( 5126 pages)
0x3b360000 - 0x3b3fffff, 0 MB ( 160 pages)
0x40000000 - 0xfbffffff, 3008 MB ( 770048 pages)
0x100000000 - 0x1ffffffff, 4096 MB (1048576 pages)
Excluded memory regions:
0x00000000 - 0x00001fff, 0 MB ( 2 pages) NoAlloc
0x07ef1000 - 0x07f0efff, 0 MB ( 30 pages) NoAlloc
0x32000000 - 0x3363bfff, 22 MB ( 5692 pages) NoAlloc
0x39f30000 - 0x39f36fff, 0 MB ( 7 pages) NoAlloc
0x39f38000 - 0x39f38fff, 0 MB ( 1 pages) NoAlloc
0x39f3b000 - 0x39f3efff, 0 MB ( 4 pages) NoAlloc
0x39f40000 - 0x39f44fff, 0 MB ( 5 pages) NoAlloc
0x39f46000 - 0x39f46fff, 0 MB ( 1 pages) NoAlloc
0x39f49000 - 0x39f49fff, 0 MB ( 1 pages) NoAlloc
0x3b350000 - 0x3b35ffff, 0 MB ( 16 pages) NoAlloc
0x3e330000 - 0x3ebf9fff, 8 MB ( 2250 pages) NoAlloc
0xfe100000 - 0xfe100fff, 0 MB ( 1 pages) NoAlloc
Found 4 CPUs in the device tree
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 3cc0c0d66a0-c255241(main)-dirty: Thu Dec 24 07:49:28 UTC 2020
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 11.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1920x1200
Preloaded elf kernel "/boot/kernel/kernel" at 0xffff00000140d000.
Preloaded elf module "/boot/kernel/umodem.ko" at 0xffff000001416220.
Preloaded elf module "/boot/kernel/ucom.ko" at 0xffff000001416a38.
module firmware already present!
real memory = 8442892288 (8051 MB)
Physical memory chunk(s):
0x00000000002000 - 0x00000007ef0fff, 133099520 bytes (32495 pages)
0x00000007f0f000 - 0x00000031ffffff, 705630208 bytes (172273 pages)
0x0000003363c000 - 0x00000039f2ffff, 110051328 bytes (26868 pages)
0x00000039f37000 - 0x00000039f37fff, 4096 bytes (1 pages)
0x00000039f39000 - 0x00000039f3afff, 8192 bytes (2 pages)
0x00000039f3f000 - 0x00000039f3ffff, 4096 bytes (1 pages)
0x00000039f45000 - 0x00000039f45fff, 4096 bytes (1 pages)
0x00000039f47000 - 0x00000039f48fff, 8192 bytes (2 pages)
0x00000039f4a000 - 0x0000003b34ffff, 20996096 bytes (5126 pages)
0x0000003b360000 - 0x0000003b3fffff, 655360 bytes (160 pages)
0x00000040000000 - 0x000000fbffffff, 3154116608 bytes (770048 pages)
0x00000100000000 - 0x000001f35ebfff, 4083073024 bytes (996844 pages)
avail memory = 8206753792 (7826 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: no preloaded entropy cache
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
VIMAGE (virtualized network stack) enabled
hostuuid: using 00000000-0000-0000-0000-000000000000
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
random: entropy device external interface
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
MAP 39f38000 mode 2 pages 1
MAP 39f3c000 mode 2 pages 3
MAP 39f40000 mode 2 pages 4
MAP 3b350000 mode 2 pages 16
MAP fe100000 mode 0 pages 1
crypto: <crypto core>
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus1: <Flattened device tree simple bus> on ofwbus0
simplebus2: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
simplebus3: <Flattened device tree simple bus> on ofwbus0
clk_fixed2: <Fixed clock> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x7d5d2000-0x7d5d2eff on simplebus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version 0.2 compatible
gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 31 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 14 on simplebus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
gpio0: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
Checking root against raspberrypi,model-b
Checking root against brcm,bcm2835
Checking root against brcm,bcm2709
Checking root against brcm,bcm2836
Checking root against brcm,bcm2837
Checking root against brcm,bcm2711
gpiobus0: <GPIO bus> on gpio0
gpioregulator0: <GPIO controlled regulator> on ofwbus0
generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
efirtc0: cannot read EFI realtime clock, error 78
ofwbus0: <framebuffer@3e330000> mem 0x3e330000-0x3ebf9fff compat simple-framebuffer (no driver attached)
simplebus0: <timer@7e003000> mem 0x7e003000-0x7e003fff irq 8,9,10,11 compat brcm,bcm2835-system-timer (no driver attached)
simplebus0: <txp@7e004000> mem 0x7e004000-0x7e00401f irq 12 disabled compat brcm,bcm2835-txp (no driver attached)
simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat brcm,bcm2711-cprman (no driver attached)
simplebus0: <rng@7e104000> mem 0x7e104000-0x7e10400f irq 13 compat brcm,bcm2711-rng200 (no driver attached)
simplebus0: <gpio@7e200000> mem 0x7e200000-0x7e2000b3 irq 15,16 compat brcm,bcm2711-gpio (no driver attached)
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 17 on simplebus0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 18 disabled compat brcm,bcm2835-sdhost (no driver attached)
simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 19 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e2051ff irq 20 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <i2c0mux> disabled compat i2c-mux-pinctrl (no driver attached)
simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached)
simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 21 disabled compat brcm,bcm2835-dsi0 (no driver attached)
simplebus0: <aux@7e215000> mem 0x7e215000-0x7e215007 compat brcm,bcm2835-aux (no driver attached)
simplebus0: <serial@7e215040> mem 0x7e215040-0x7e21507f irq 22 disabled compat brcm,bcm2835-aux-uart (no driver attached)
simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 23 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 24 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 disabled compat brcm,bcm2835-pwm (no driver attached)
simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 25 disabled compat brcm,bcm2835-hvs (no driver attached)
simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 26 disabled compat brcm,bcm2835-dsi1 (no driver attached)
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 27 on simplebus0
simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 28 disabled compat brcm,bcm2835-vec (no driver attached)
simplebus0: <usb@7e980000> mem 0x7e980000-0x7e98ffff,0x7e00b200-0x7e00b3ff irq 29,30 disabled compat brcm,bcm2708-usb (no driver attached)
simplebus0: <local_intc@40000000> mem 0x40000000-0x400000ff compat brcm,bcm2836-l1-intc (no driver attached)
simple_mfd0: <thermal> mem 0x7d5d2000-0x7d5d2eff compat brcm,bcm2711-thermal (no driver attached)
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 32,33,34,35,36,37,38,39,40,41,42 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
simplebus0: <serial@7e201400> mem 0x7e201400-0x7e2015ff irq 43 disabled compat arm,pl011 (no driver attached)
simplebus0: <serial@7e201600> mem 0x7e201600-0x7e2017ff irq 44 disabled compat arm,pl011 (no driver attached)
simplebus0: <serial@7e201800> mem 0x7e201800-0x7e2019ff irq 45 disabled compat arm,pl011 (no driver attached)
simplebus0: <serial@7e201a00> mem 0x7e201a00-0x7e201bff irq 46 disabled compat arm,pl011 (no driver attached)
simplebus0: <spi@7e204600> mem 0x7e204600-0x7e2047ff irq 47 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204800> mem 0x7e204800-0x7e2049ff irq 48 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204a00> mem 0x7e204a00-0x7e204bff irq 49 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <spi@7e204c00> mem 0x7e204c00-0x7e204dff irq 50 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <i2c@7e205600> mem 0x7e205600-0x7e2057ff irq 51 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <i2c@7e205800> mem 0x7e205800-0x7e2059ff irq 52 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <i2c@7e205a00> mem 0x7e205a00-0x7e205bff irq 53 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <i2c@7e205c00> mem 0x7e205c00-0x7e205dff irq 54 disabled compat brcm,bcm2711-i2c (no driver attached)
simplebus0: <pwm@7e20c800> mem 0x7e20c800-0x7e20c827 disabled compat brcm,bcm2835-pwm (no driver attached)
gpioc0: <GPIO controller> on gpio0
bcm2835_firmware0: <reset> compat raspberrypi,firmware-reset (no driver attached)
simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached)
simplebus0: <mailbox@7e00b840> mem 0x7e00b840-0x7e00b87b irq 55 compat brcm,bcm2711-vchiq (no driver attached)
simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 56 disabled compat brcm,bcm2711-pixelvalve0 (no driver attached)
simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 57 disabled compat brcm,bcm2711-pixelvalve1 (no driver attached)
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 58 on simplebus0
sdhci_bcm0: SDHCI frequency: 250MHz
sdhci_bcm0-slot0: 250MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000000
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Card inserted
mmc0: <MMC/SD bus> on sdhci_bcm0
simplebus0: <mmcnr@7e300000> mem 0x7e300000-0x7e3000ff irq 59 disabled compat brcm,bcm2835-mmc (no driver attached)
simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 60 disabled compat raspberrypi,rpi-firmware-kms-2711 (no driver attached)
simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 61 disabled compat brcm,bcm2835-smi (no driver attached)
simplebus0: <csi@7e800000> mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 62 disabled compat brcm,bcm2835-unicam (no driver attached)
simplebus0: <csi@7e801000> mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 63 disabled compat brcm,bcm2835-unicam (no driver attached)
simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached)
simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached)
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 1920x1200(1920x1200@0,0) 32bpp
fb0: fbswap: 1, pitch 7680, base 0x3e330000, screen_size 9216000
simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached)
simplebus0: <pixelvalve@7e20a000> mem 0x7e20a000-0x7e20a0ff irq 64 disabled compat brcm,bcm2711-pixelvalve2 (no driver attached)
simplebus0: <pixelvalve@7e216000> mem 0x7e216000-0x7e2160ff irq 65 disabled compat brcm,bcm2711-pixelvalve4 (no driver attached)
simplebus0: <pixelvalve@7ec12000> mem 0x7ec12000-0x7ec120ff irq 66 disabled compat brcm,bcm2711-pixelvalve3 (no driver attached)
simplebus0: <clock@7ef00000> mem 0x7ef00000-0x7ef0000f disabled compat brcm,brcm2711-dvp (no driver attached)
simplebus0: <hdmi@7ef00700> mem 0x7ef00700-0x7ef009ff,0x7ef00300-0x7ef004ff,0x7ef00f00-0x7ef00f7f,0x7ef00f80-0x7ef00fff,0x7ef01b00-0x7ef01cff,0x7ef01f00-0x7ef022ff,0x7ef00200-0x7ef0027f,0x7ef04300-0x7ef043ff,0x7ef20000-0x7ef200ff,0x7ef00100-0x7ef0012f irq 67 disabled compat brcm,bcm2711-hdmi0 (no driver attached)
simplebus0: <i2c@7ef04500> mem 0x7ef04500-0x7ef045ff,0x7ef00b00-0x7ef00dff disabled compat brcm,bcm2711-hdmi-i2c (no driver attached)
simplebus0: <hdmi@7ef05700> mem 0x7ef05700-0x7ef059ff,0x7ef05300-0x7ef054ff,0x7ef05f00-0x7ef05f7f,0x7ef05f80-0x7ef05fff,0x7ef06b00-0x7ef06cff,0x7ef06f00-0x7ef072ff,0x7ef00280-0x7ef002ff,0x7ef09300-0x7ef093ff,0x7ef20000-0x7ef200ff,0x7ef00100-0x7ef0012f irq 68 disabled compat brcm,bcm2711-hdmi1 (no driver attached)
simplebus0: <i2c@7ef09500> mem 0x7ef09500-0x7ef095ff,0x7ef05b00-0x7ef05dff disabled compat brcm,bcm2711-hdmi-i2c (no driver attached)
sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 69 on simplebus1
sdhci_bcm1: SDHCI frequency: 100MHz
sdhci_bcm1-slot0: 100MHz HS 8bits VDD: 3.3V 1.8V VCCQ: 3.3V DRV: BC PIO embedded
sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
sdhci_bcm1-slot0: Sys addr: 0xf6e7b800 | Version: 0x00001002
sdhci_bcm1-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm1-slot0: Present: 0x1fff0000 | Host ctl: 0x00000002
sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000080
sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00000107
sdhci_bcm1-slot0: Timeout: 0x0000000e | Int stat: 0x00000000
sdhci_bcm1-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm1-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525
sdhci_bcm1-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000
sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm1-slot0: ===========================================
sdhci_bcm1: vmmc-supply regulator found
sdhci_bcm1: vqmmc-supply regulator found
sdhci_bcm1-slot0: Card inserted
mmc1: <MMC/SD bus> on sdhci_bcm1
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
ofwbus0: no default resources for rid = 4, type = 1
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: missing 'clock-frequency' property
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu1: missing 'clock-frequency' property
cpu2: <Open Firmware CPU> on cpulist0
cpu2: missing 'clock-frequency' property
cpu3: <Open Firmware CPU> on cpulist0
cpu3: missing 'clock-frequency' property
pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f irq 70,71 on simplebus2
pcib0: parsing FDT for ECAM0:
pcib0: PCI addr: 0xf8000000, CPU addr: 0x600000000, Size: 0x4000000
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
pcib0: Bus is not cache-coherent
pcib0: hardware identifies as revision 0x304.
pcib0: note: reported link speed is 5.0 GT/s.
pci1: <PCI bus> on pcib0
pci1: domain=0, physical bus=0
found-> vendor=0x14e4, dev=0x2711, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
secbus=1, subbus=1
pcib1: <PCI-PCI bridge> irq 81 at device 0.0 on pci1
pcib0: rman_reserve_resource: start=0xf8000000, end=0xf80fffff, count=0x100000
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: memory decode 0xf8000000-0xf80fffff
pci2: <PCI bus> on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci2
pci2: domain=0, physical bus=1
found-> vendor=0x1106, dev=0x3483, revid=0x01
domain=0, bus=1, slot=0, func=0
class=0c-03-30, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=0
powerspec 3 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type Memory, range 64, base 0, size 12, memory disabled
pcib1: slot 0 INTA is routed to irq 82
bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 82 at device 0.0 on pci2
bcm_xhci0: note: xhci firmware not found.
bcm_xhci0: note: installing xhci firmware.
bcm_xhci0: note: xhci firmware detected; firmware is revision 138a1.
pcib1: allocated memory range (0xf8000000-0xf8000fff) for rid 10 of bcm_xhci0
bcm_xhci0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf8000000
bcm_xhci0: 32 bytes context size, 64-bit DMA
bcm_xhci0: attempting to allocate 1 MSI vectors (4 supported)
bcm_xhci0: using IRQ 83 for MSI
bcm_xhci0: MSI enabled
usbus0 on bcm_xhci0
bcm_xhci0: usbpf: Attached
bcm_xhci0: note: switched to 32-bit DMA.
pci0: <PCI bus> on pcib0
pci0: failed to allocate bus number
device_attach: pci0 attach returned 6
genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 72,73 on simplebus2
genet0: GENET version 5.0 phy 0x0000
miibus0: <MII bus> on genet0
brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: OUI 0x18c086, model 0x000a, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
genet0: bpf attached
genet0: Ethernet address: nn:nn:nn:nn:nn:nn
simplebus2: <dma@7e007b00> mem 0x7e007b00-0x7e007eff irq 74,75,76,77 compat brcm,bcm2711-dma (no driver attached)
simplebus2: <xhci@7e9c0000> mem 0x7e9c0000-0x7eabffff irq 78 disabled compat generic-xhci (no driver attached)
simplebus2: <hevc-decoder@7eb00000> mem 0x7eb00000-0x7eb0ffff compat raspberrypi,rpivid-hevc-decoder (no driver attached)
simplebus2: <rpivid-local-intc@7eb10000> mem 0x7eb10000-0x7eb10fff irq 79 compat raspberrypi,rpivid-local-intc (no driver attached)
simplebus2: <h264-decoder@7eb20000> mem 0x7eb20000-0x7eb2ffff compat raspberrypi,rpivid-h264-decoder (no driver attached)
simplebus2: <vp9-decoder@7eb30000> mem 0x7eb30000-0x7eb3ffff compat raspberrypi,rpivid-vp9-decoder (no driver attached)
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
simplebus3: <v3d@7ec04000> mem 0x7ec00000-0x7ec03fff,0x7ec04000-0x7ec07fff irq 80 disabled compat brcm,2711-v3d (no driver attached)
ofwbus0: <gpu> disabled compat brcm,bcm2711-vc5 (no driver attached)
cryptosoft0: <software crypto>
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
Device configuration finished.
Found SMCCC version 1.0
procfs registered
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
usbus0: 5.0Gbps Super Speed USB v3.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
sdhci_bcm0-slot0: Divider 313 for freq 399361 (base 250000000)
mmc0: Probing bus
ugen0.1: <0x1106 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
uhub0: 5 ports with 4 removable, self powered
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947
sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
mmc0: SD probe: failed
mmc0: MMC probe: failed
mmc0: Current OCR: 0x00000000
mmc0: No compatible cards found on bus
sdhci_bcm1-slot0: Divider 125 for freq 400000 (base 100000000)
mmc1: Probing bus
mmc1: SD 2.0 interface conditions: OK
mmc1: SD probe: OK (OCR: 0x40ff8000)
mmc1: Current OCR: 0x00ff8000
mmc1: Probing cards
mmc1: New card detected (CID 03534441434c434480bd4e406e010c00)
mmc1: New card detected (CSD 400e00325b590000edc87f800a404000)
mmc1: Card at relative address 0xaaaa added:
mmc1: card: SDHC ACLCD 8.0 SN BD4E406E MFG 12/2016 by 3 SD
mmc1: quirks: 0
mmc1: bus: 4bit, 50MHz (high speed timing)
mmc1: memory: 62333952 blocks, erase sector 8192 blocks
mmc1: setting transfer rate to 50.000MHz (high speed timing)
sdhci_bcm1-slot0: Divider 1 for freq 50000000 (base 100000000)
mmcsd0: 32GB <SDHC ACLCD 8.0 SN BD4E406E MFG 12/2016 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
GEOM: new disk mmcsd0
mmc1: setting bus width to 4 bits high speed timing
bcm2835_cpufreq0: Boot settings:
bcm2835_cpufreq0: current ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF
bcm2835_cpufreq0: max/min ARM 1500/600MHz, Core 500/200MHz, SDRAM 400/400MHz
bcm2835_cpufreq0: current Core 835mV, SDRAM_C 1100mV, SDRAM_I 1100mV, SDRAM_P 1100mV
bcm2835_cpufreq0: max/min Core 880/880mV, SDRAM_C 1100/1100mV, SDRAM_I 1100/1100mV, SDRAM_P 1100/1100mV
bcm2835_cpufreq0: Temperature 20.8C
GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Release APs...GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
done
CPU 0: ARM Cortex-A72 r0p3 affinity: 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
CPU 1: ARM Cortex-A72 r0p3 affinity: 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 2
CPU 3: ARM Cortex-A72 r0p3 affinity: 3
WARNING: WITNESS option enabled, expect reduced performance.
regulator: shutting down unused regulators
GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
uhub1GEOM_PART: partition 1 on (diskid/DISK-BD4E406E, MBR) is not aligned on 4194304 bytes
on uhub0
GEOM_PART: partition 2 on (diskid/DISK-BD4E406E, MBR) is not aligned on 4194304 bytes
uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.21, addr 1> on usbus0
GEOM_PART: partition 1 on (diskid/DISK-BD4E406Es2, BSD) is not aligned on 4194304 bytes
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
start_init: trying /sbin/init
Growing root partition to fill device
uhub1: 4 ports with 4 removable, self powered
random: randomdev_wait_until_seeded unblock wait
ugen0.3: <Microsoft Microsoft Basic Optical Mouse> at usbus0
ugen0.4: <CHICONY HP Basic USB Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 3> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
random: randomdev_wait_until_seeded unblock wait
random: unblocking device.
GEOM_PART: mmcsd0s2 was automatically resized.
Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them.
GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
mmcsd0s2 resized
GEOM: Reconfigure ufs/rootfs, start 0 length 31860981760 end 31860981759
GEOM: Reconfigure ufsid/5fe4501abb07b7be, start 0 length 31860981760 end 31860981759
GEOM_PART: partition 1 on (diskid/DISK-BD4E406E, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-BD4E406E, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-BD4E406Es2, BSD) is not aligned on 4194304 bytes
mmcsd0s2a resized
gpart: arg0 'ufs/rootfs': Invalid argument
super-block backups (for fsck_ffs -b #) at:
6402432, 7682880, 8963328, 10243776, 11524224, 12804672, 14085120, 15365568,
16646016, 17926464, 19206912, 20487360, 21767808, 23048256, 24328704,
25609152, 26889600, 28170048, 29450496, 30730944, 32011392, 33291840,
34572288, 35852736, 37133184, 38413632, 39694080, 40974528, 42254976,
43535424, 44815872, 46096320, 47376768, 48657216, 49937664, 51218112,
52498560, 53779008, 55059456, 56339904, 57620352, 58900800, 60181248, 61461696
GEOM_PART: partition 1 on (diskid/DISK-BD4E406E, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-BD4E406E, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-BD4E406Es2, BSD) is not aligned on 4194304 bytes
No suitable dump device was found.
Setting hostuuid: 30303031-3030-3030-3831-353938333338.
Setting hostid: 0xa53f3d58.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 6858759 free (15 frags, 857343 blocks, 0.0% fragmentation)
GEOM_PART: partition 1 on (diskid/DISK-BD4E406E, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-BD4E406E, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-BD4E406Es2, BSD) is not aligned on 4194304 bytes
Mounting local filesystems:.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
Setting hostname: generic.
Building /boot/kernel/linker.hints
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
lo0: link state changed to UP
genet0: link state changed to DOWN
Starting Network: lo0 genet0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet[_IP_XXXX] netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
genet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=68000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
ether nn:nn:nn:nn:nn:nn
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
genet0: link state changed to UP
Autoloading module: uhid.ko
Autoloading module: ums.ko
ums0 on uhub1
ums0: <Microsoft Microsoft Basic Optical Mouse, class 0/0, rev 1.10/3.90, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
Starting dhclient.
DHCPDISCOVER on genet0 to[_IP_XXXXXXXXXX] port 67 interval 5
DHCPOFFER from n.n.n.n
DHCPREQUEST on genet0 to[_IP_XXXXXXXXXX] port 67
DHCPACK from n.n.n.n
bound to n.n.n.n -- renewal in 21600 seconds.
Starting ums0 moused.
add host[_IP_XXXX]: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Updating /var/run/os-release done.
Creating and/or trimming log files.
Updating motd:.
Starting syslogd.
Clearing /tmp (X related).
Mounting late filesystems:.
Configuring vt: blanktime.
Generating RSA host key.
2048 SHA256: root@generic (RSA)
Generating ECDSA host key.
256 SHA256: root@generic (ECDSA)
Generating ED25519 host key.
256 SHA256: root@generic (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Thu Dec 24 08:39:45 UTC 2020
FreeBSD/arm64 (generic) (ttyu0)
login: root
Password:
Dec 24 08:43:47 generic login[1234]: ROOT LOGIN (root) ON ttyu0
FreeBSD 13.0-CURRENT (GENERIC) #0 3cc0c0d66a0-c255241(main)-dirty: Thu Dec 24 07:49:28 UTC 2020