Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-01-05 21:40:46
From: mlelstv
Description: RPI4 8GB
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.77 (EGGHED64) #88: Fri Jan 1 10:51:36 UTC 2021 mlelstv@slowpoke:/home/netbsd-current/obj.evbarm64-el/scratch/netbsd-current/src/sys/arch/evbarm/compile/EGGHED64 total memory = 8044 MB avail memory = 7796 MB entropy: no seed from bootloader timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated armfdt0 (root) simplebus0 at armfdt0: Raspberry Pi 4 Model B Rev 1.4 simplebus1 at simplebus0 simplebus2 at simplebus0 cpus0 at simplebus0 simplebus3 at simplebus0 cpu0 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x0 cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu0: L1 48KB/64B*256L*3W PIPT Instruction cache cpu0: L1 32KB/64B*256L*2W PIPT Data cache cpu0: L2 1024KB/64B*1024L*16W PIPT Unified cache cpu0: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu1 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x1 cpu2 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x2 cpu3 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x3 simplebus4 at simplebus1 gic0 at simplebus1: GIC armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid) armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs fclock0 at simplebus2: 54000000 Hz fixed clock (osc) bcmcprman0 at simplebus1: BCM283x Clock Controller bcmaux0 at simplebus1 fclock1 at simplebus2: 480000000 Hz fixed clock (otg) bcmicu0 at simplebus1: Multiprocessor gtmr0 at simplebus0: Generic Timer gtmr0: interrupting on GIC irq 27 armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual) timecounter: Timecounter "armgtmr0" frequency 54000000 Hz quality 500 bcmgpio0 at simplebus1: GPIO controller 2838 bcmgpio0: pins 0..31 interrupting on GIC irq 145 bcmgpio0: pins 32..58 interrupting on GIC irq 146 gpio0 at bcmgpio0: 58 pins gregulator0 at simplebus0: vdd-sd-io gregulator0: autoconfiguration error: cannot get pin 0 plcom0 at simplebus1: ARM PL011 UART plcom0: txfifo disabled plcom0: interrupting on GIC irq 153 com0 at simplebus1: BCM AUX UART, 1-byte FIFO com0: console com0: interrupting on GIC irq 125 mmcpwrseq0 at simplebus0autoconfiguration error: : couldn't get reset GPIOs /soc/dsi@7e209000 at simplebus1 not configured /soc/firmware/gpio at simplebus4 not configured /soc/power at simplebus1 not configured /phy at simplebus0 not configured bcmmbox0 at simplebus1: VC mailbox bcmmbox0: interrupting on GIC irq 65 vcmbox0 at bcmmbox0 genet0 at simplebus3: GENETv5.0 genet0: Ethernet address [_MAC_XXXXXXXXXX] brgphy0 at genet0 phy 1: BCM54213PE 1000BASE-T media interface, rev. 2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto genet0: interrupting on GIC irq 189 /soc/timer@7e003000 at simplebus1 not configured /soc/txp@7e004000 at simplebus1 not configured bcmspi0 at simplebus1: SPI bcmspi0: interrupting on GIC irq 150 spi0 at bcmspi0: SPI bus /soc/spi@7e215080 at simplebus1 not configured /soc/spi@7e2150c0 at simplebus1 not configured sdhc0 at simplebus1: SDHC controller sdhc0: interrupting on GIC irq 158 bsciic0 at simplebus1: Broadcom Serial Controller bsciic0: interrupting on GIC irq 149 iic0 at bsciic0: I2C bus /soc/vec@7e806000 at simplebus1 not configured dwctwo0 at simplebus1: USB controller dwctwo0: interrupting on GIC irq 105 bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller /soc/pwm@7e20c800 at simplebus1 not configured sdhc1 at simplebus1: SDHC controller sdhc1: interrupting on GIC irq 158 vchiq0 at simplebus1: BCM2835 VCHIQ genfb0 at simplebus0rpi_fb_init: failed to set mode 1280x720 : disabled bcm2838pcie0 at simplebus0: Broadcom PCIE Host Controller bcm2838pcie0: Using 3GB DMA subregion bcm2838pcie0: MMIO (32-bit): 0xf8000000+0x4000000@0x600000000 RootBridge Revision 304 pci0 at bcm2838pcie0 bus 0 pci0: memory space enabled ppb0 at pci0 dev 0 function 0: vendor 14e4 product 2711 (rev. 0x10) ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s pci1 at ppb0 bus 1 pci1: memory space enabled xhci0 at pci1 dev 0 function 0: vendor 1106 product 3483 (rev. 0x01) PCI BS f8000000 -> 600000000 xhci0: 64-bit DMA xhci0: interrupting at GIC irq 175 xhci0: xHCI version 1.0 usb0 at xhci0: USB revision 3.0 usb1 at xhci0: USB revision 2.0 /chosen at simplebus0 not configured armpmu0 at simplebus0: Performance Monitor Unit gpioleds0 at simplebus0: ACT bcm2838rng0 at simplebus1: Hardware RNG entropy: WARNING: extracting entropy too early timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu3: L1 48KB/64B*256L*3W PIPT Instruction cache cpu3: L1 32KB/64B*256L*2W PIPT Data cache cpu3: L2 1024KB/64B*1024L*16W PIPT Unified cache cpu3: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu2: L1 48KB/64B*256L*3W PIPT Instruction cache cpu2: L1 32KB/64B*256L*2W PIPT Data cache cpu2: L2 1024KB/64B*1024L*16W PIPT Unified cache cpu2: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 cpu1: L1 48KB/64B*256L*3W PIPT Instruction cache cpu1: L1 32KB/64B*256L*2W PIPT Data cache cpu1: L2 1024KB/64B*1024L*16W PIPT Unified cache cpu1: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add sdhc0: SDHC 3.0, rev 153, caps <01210000/00000000>, PIO, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks sdmmc0 at sdhc0 slot 0 dwctwo0: Core Release: 2.80a (snpsid=4f54280a) usb2 at dwctwo0: USB revision 2.0 sdhc1: SDHC 3.0, rev 16, caps <01210000/00000000>, PIO, 100000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks sdmmc1 at sdhc1 slot 0 uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 uhub0: 4 ports with 4 removable, self powered uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 uhub1: 1 port with 1 removable, self powered armpmu0: interrupting on GIC irq 48 armpmu0: interrupting on GIC irq 49 armpmu0: interrupting on GIC irq 50 armpmu0: interrupting on GIC irq 51 uhub2 at usb2: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered IPsec: Initialized Security Association Processing. aes: ARM NEON vpaes chacha: ARM NEON ChaCha adiantum: self-test passed aes_ccm: self-test passed blake2s: self-test passed sdmmc1: SD card status: 4-bit, C10, U1 ld1 at sdmmc1: <0x03:0x5344:SU32G:0x80:0x22ae1589:0x0db> ld1: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors dk0 at ld1: "arnold/a", 42916096 blocks at 458752, type: ffs dk1 at ld1: "arnold/b", 262144 blocks at 196608, type: swap dk2 at ld1: "arnold/e", 163840 blocks at 32768, type: msdos sdmmc0: 4-bit width,ld1: 4-bit width, 50.000 MHz High-Speed/SDR25,sdmmc0: SDIO function 50.000 MHz bwfm0 at sdmmc0 function 1 (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 function 3 not configured uhub3 at uhub1 port 1: vendor 2109 (0x2109) USB2.0 Hub (0x3431), class 9/0, rev 2.10/4.21, addr 2 uhub3: single transaction translator uhub3: 4 ports with 4 removable, self powered umass0 at uhub0 port 2 configuration 1 interface 0 umass0: Samsung (0x04e8) Portable SSD T5 (0x61f5), rev 3.10/1.00, addr 1 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <Samsung, Portable SSD T5, 0> disk fixed sd0: 465 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors sd0: GPT GUID: 89fae57f-9efa-44f3-b9a0-90bc232cd89e dk3 at sd0: "arnold-efi", 204800 blocks at 40, type: msdos dk4 at sd0: "arnold-root", 819200 blocks at 204840, type: ffs dk5 at sd0: "arnold-swap", 16777216 blocks at 1024040, type: swap dk6 at sd0: "arnold-var", 16777216 blocks at 17801256, type: ffs dk7 at sd0: "arnold-usr", 67108864 blocks at 34578472, type: ffs dk8 at sd0: "arnold-home", 875085792 blocks at 101687336, type: ffs cgd: self-test aes-xts-256 cgd: self-test aes-xts-512 cgd: self-test aes-cbc-128 cgd: self-test aes-cbc-256 cgd: self-test 3des-cbc-192 cgd: self-test blowfish-cbc-448 cgd: self-test aes-cbc-128 (encblkno8) cgd: self-tests passed iscsi: attached. major = 203 WARNING: 2 errors while detecting hardware; check system log. boot device: ld1 root on dk4 dumps on dk1 root file system type: ffs kern.module.path=/stand/evbarm/9.99.77/modules WARNING: no TOD clock present vchiq0: interrupting on GIC irq 66 WARNING: using filesystem time vchiq: vchiq_init_state: slot_zero = 0xffffc000b1919000, is_master = 0 WARNING: CHECK AND RESET THE DATE! vchiq: local ver 8 (min 3), remote ver 8. vcaudio0 at vchiq0: auds bwfm0: Firmware file default: brcmfmac43455-sdio.bin bwfm0: Firmware file model-spec: brcmfmac43455-sdio.raspberrypi,4-model-b.bin bwfm0: Found Firmware file: brcmfmac43455-sdio.bin audio0 at vcaudio0: playback, capture, half duplex, independent audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback audio0: slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for recording spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured bwfm0: NVRAM file default: brcmfmac43455-sdio.txt bwfm0: NVRAM file model-spec: brcmfmac43455-sdio.raspberrypi,4-model-b.txt bwfm0: Found NVRAM file: brcmfmac43455-sdio.raspberrypi,4-model-b.txt bwfm0: CHIPACTIVE bwfm0: wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4 bwfm0: address [_MAC_XXXXXXXXXX] entropy: ready