Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-01-16 17:24:45
From: tsutsui
Description: NetbSD/i386 9.1 on ABiT KT7A-RAID with Duron 1300MHz
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC total memory = 767 MB avail memory = 734 MB timecounter: Timecounters tick every 10.000 msec Kernelized RAIDframe activated running cgd selftest aes-xts-256 aes-xts-512 done timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 VIA Technologies, Inc. VT8363 ( ) mainbus0 (root) ACPI: RSDP 0x00000000000F7900 000014 (v00 VT8371) ACPI: RSDT 0x000000002FFF3000 000028 (v01 VT8371 AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 0x000000002FFF3040 000074 (v01 VT8371 AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 0x000000002FFF30C0 0024FD (v01 VT8371 AWRDACPI 00001000 MSFT 0100000C) ACPI: FACS 0x000000002FFF0000 000040 ACPI: 1 ACPI AML tables successfully acquired and loaded cpu0 at mainbus0 cpu0: AMD Duron(tm) processor, id 0x671 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20190405 acpi0: X/RSDT: OemId <VT8371,AWRDACPI,42302e31>, AslId <AWRD,00000000> LNKC: ACPI: Found matching pin for 0.9.INTA at func 0: 10 LNKC: ACPI: Found matching pin for 0.19.INTA at func 0: 10 LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 10 acpi0: SCI interrupting at int 10 acpi0: fixed power button present timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button MEM (PNP0C01) at acpi0 not configured SYSR (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 COPR (PNP0C04) at acpi0 not configured FDC0 (PNP0700) at acpi0 not configured UAR1 (PNP0501) at acpi0 not configured UAR2 (PNP0501) at acpi0 not configured LPT1 (PNP0400) at acpi0 not configured PSMR (PNP0C02) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 1106 product 0305 (rev. 0x03) agp0 at pchb0: aperture at 0xc0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: vendor 1106 product 8305 (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled nouveau0 at pci1 dev 0 function 0: vendor 10de product 0322 (rev. 0xa1) pcib0 at pci0 dev 7 function 0: vendor 1106 product 0686 (rev. 0x40) viaide0 at pci0 dev 7 function 1 viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 uhci0 at pci0 dev 7 function 2: vendor 1106 product 3038 (rev. 0x16) uhci0: interrupting at irq 10 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 7 function 3: vendor 1106 product 3038 (rev. 0x16) uhci1: interrupting at irq 10 usb1 at uhci1: USB revision 1.0 vendor 1106 product 3057 (miscellaneous bridge, revision 0x40) at pci0 dev 7 function 4 not configured fxp0 at pci0 dev 9 function 0: Intel i8255x Ethernet (rev. 0x02) fxp0: interrupting at irq 10 fxp0: May need receiver lock-up workaround fxp0: Ethernet address [_MAC_XXXXXXXXXX] nsphy0 at fxp0 phy 1: DP83840 10/100 media interface, rev. 1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hptide0 at pci0 dev 19 function 0 hptide0: Triones/Highpoint HPT370 IDE Controller hptide0: bus-master DMA support present hptide0: primary channel wired to native-PCI mode hptide0: using irq 10 for native-PCI interrupt atabus2 at hptide0 channel 0 hptide0: secondary channel wired to native-PCI mode atabus3 at hptide0 channel 1 isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: read port 0x203 wss1 at isapnp0 port 0x530/8,0x388/8 irq 11 drq 0 wss1: autoconfiguration error: ad1848_probe failed isapnp0: <CMI8330. Audio Adapter, @H@0001, , > port 0x330/2 irq 9 not configured isapnp0: <CMI8330. Audio Adapter, @P@0001, , > port 0x200/8 not configured sb1 at isapnp0 port 0x220/16 irq 5 drq 1,5 sb1: CMI8330. Audio Adapter : dsp v4.13 audio0 at sb1: playback, capture, half duplex, independent audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording midi1 at sb1: SB MIDI UART opl0 at sb1: model OPL3 midi2 at opl0: SB Yamaha OPL3 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 IPsec: Initialized Security Association Processing. uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at uhub0 port 1: Chicony (0x4fe) Generic USB Hub (0x08), class 9/0, rev 1.10/1.02, addr 2 uhub2: 3 ports with 2 removable, bus powered wd0 at atabus0 drive 0 wd0: <WDC WD800JD-75MSA3> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) uhidev0 at uhub2 port 1 configuration 1 interface 0 uhidev0: Chicony (0x4fe) PFU-68 USB Keyboard (0x07), rev 1.10/1.02, addr 3, iclass 3/1 ukbd0 at uhidev0 wskbd0 at ukbd0: console keyboard uhidev1 at uhub2 port 3 configuration 1 interface 0 uhidev1: Telink (0x248a) Wireless Receiver (0x8366), rev 1.10/1.00, addr 4, iclass 3/1 uhidev1: 5 report ids ums0 at uhidev1 reportid 1: 5 buttons and Z dir wsmouse0 at ums0 mux 0 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 5: input=0, output=0, feature=7 umass0 at uhub0 port 2 configuration 1 interface 0 umass0: BUFFALO (0x411) USB Flash Disk (0x1f2), rev 2.10/a.00, addr 5 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <BUFFALO, USB Flash Disk, 1.00> disk removable sd0: fabricating a geometry sd0: 14738 MB, 14738 cyl, 64 head, 32 sec, 512 bytes/sect x 30183424 sectors sd0: fabricating a geometry WARNING: 1 error while detecting hardware; check system log. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs kern.module.path=/stand/i386/9.1/modules nouveau0: info: NVIDIA NV34 (034200b1) nouveau0: info: bios: version[_IP_XXXXXX].00 nouveau0: notice: tmr: unknown input clock freq nouveau0: info: fb: 128 MiB DDR1 Zone kernel: Available graphics memory: 149762 kiB nouveau0: info: DRM: VRAM: 127 MiB nouveau0: info: DRM: GART: 128 MiB nouveau0: info: DRM: BMP version 5.38 nouveau0: info: DRM: DCB version 2.2 nouveau0: info: DRM: DCB outp 00: 01000300 000088b8 nouveau0: info: DRM: DCB outp 01: 02010310 000088b8 nouveau0: info: DRM: DCB outp 02: 01010312 00000000 nouveau0: info: DRM: DCB outp 03: 02020321 00000033 nouveau0: info: DRM: Loading NV17 power sequencing microcode nouveau0: info: DRM: Saving VGA fonts kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). kern info: [drm] Driver supports precise vblank timestamp query. nouveau0: info: DRM: 0xDB49: Parsing digital output script table nouveau0: info: DRM: MM: using M2MF for buffer copies nouveau0: info: DRM: Setting dpms mode 3 on TV encoder (output 3) nouveaufb0 at nouveau0 nouveaufb0: framebuffer at 0xdba6d000, size 1920x1080, depth 32, stride 7680 wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0