Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2021-01-22 23:37:42
From: dgv
Description: OpenBSD 6.6 (GENERIC.MP) on HP Thin Client t5740
OpenBSD 6.6 (GENERIC.MP) #4: Wed Jan 15 08:56:09 MST 2020 xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC.MP real mem = 3150069760 (3004MB) avail mem = 3076902912 (2934MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 03/22/11, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.6 @ 0xfd100 (43 entries) bios0: vendor American Megatrends Inc. version "786R8 v1.04" date 03/22/2011 bios0: Hewlett-Packard hp t5740 acpi0 at bios0: ACPI 1.0 acpi0: sleep states S0 S5 acpi0: tables DSDT FACP APIC MCFG OEMB GSCI SSDT acpi0: wakeup devices P0P2(S0) P0P1(S0) USB0(S0) USB1(S0) USB2(S0) USB5(S0) EUSB(S0) USB3(S0) USB4(S0) USB6(S0) USBE(S0) GBE_(S0) P0P4(S0) P0P5(S0) P0P6(S0) P0P7(S0) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz, 06-1c-02 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,NXE,LAHF,PERF,SENSOR,MELTDOWN mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges cpu0: apic clock running at 166MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz, 06-1c-02 cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,NXE,LAHF,PERF,SENSOR,MELTDOWN ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 1 (P0P1) acpiprt3 at acpi0: bus 2 (P0P4) acpiprt4 at acpi0: bus -1 (P0P5) acpiprt5 at acpi0: bus -1 (P0P6) acpiprt6 at acpi0: bus -1 (P0P7) acpiprt7 at acpi0: bus 3 (P0P8) acpiprt8 at acpi0: bus 4 (P0P9) acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS "PNP0A08" at acpi0 not configured acpicmos0 at acpi0 acpibtn0 at acpi0: PWRB acpivideo0 at acpi0: GFX0 bios0: ROM list: 0xc0000/0xfc00! 0xd0000/0x2000 cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x09 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0: apic 2 int 16 "Intel GM45 Video" rev 0x09 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Realtek ALC272, Intel/0x2802, using Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 pci2 at ppb1 bus 3 athn0 at pci2 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 16 athn0: AR9280 rev 2 (2T2R), ROM rev 22, address xx:xx:xx:xx:xx:xx ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 pci3 at ppb2 bus 4 bge0 at pci3 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address xx:xx:xx:xx:xx:xx brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci4 at ppb3 bus 1 pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 19 for native-PCI interrupt wd0 at pciide0 channel 1 drive 0: <2GB ATA Flash Disk> wd0: 1-sector PIO, LBA, 1953MB, 4000752 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 sdtemp0 at iic0 addr 0x18: mcp98242 spdmem0 at iic0 addr 0x50: 1GB DDR3 SDRAM PC3-8500 SO-DIMM with thermal sensor spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x03: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 2 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 uhub8 at uhub6 port 1 configuration 1 interface 0 "ASIX Electronics AX68002" rev 1.01/0.12 addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.07 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.07 addr 3 uhidev1: iclass 3/1, 8 report ids ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 uhidev2 at uhub8 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.07 addr 3 uhidev2: iclass 3/0, 33 report ids uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 uhidev3 at uhub8 port 2 configuration 1 interface 0 "MOSART Semi. 2.4G Keyboard Mouse" rev 1.10/1.05 addr 4 uhidev3: iclass 3/1 ukbd1 at uhidev3: 8 variable keys, 6 key codes wskbd2 at ukbd1 mux 1 uhidev4 at uhub8 port 2 configuration 1 interface 1 "MOSART Semi. 2.4G Keyboard Mouse" rev 1.10/1.05 addr 4 uhidev4: iclass 3/1, 5 report ids uhid7 at uhidev4 reportid 1: input=2, output=0, feature=0 uhid8 at uhidev4 reportid 2: input=1, output=0, feature=0 ums1 at uhidev4 reportid 3: 5 buttons, Z and W dir wsmouse1 at ums1 mux 0 uhid9 at uhidev4 reportid 5: input=5, output=6, feature=0 uhidev5 at uhub8 port 6 configuration 1 interface 0 "ASIX Electronics AX68002" rev 1.10/0.02 addr 5 uhidev5: iclass 3/1 ukbd2 at uhidev5: 8 variable keys, 6 key codes wskbd3 at ukbd2 mux 1 uhidev6 at uhub8 port 6 configuration 1 interface 1 "ASIX Electronics AX68002" rev 1.10/0.02 addr 5 uhidev6: iclass 3/1, 3 report ids ums2 at uhidev6 reportid 1: 5 buttons, Z dir wsmouse2 at ums2 mux 0 uhid10 at uhidev6 reportid 2: input=1, output=0, feature=0 uhid11 at uhidev6 reportid 3: input=2, output=0, feature=0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (9dab1045384f8a62.a) swap on wd0b dump on wd0b inteldrm0: 1920x1080, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wskbd1: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wskbd3: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation)