Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2021-02-01 19:09:47
From: Jason Thorpe
Description: NetBSD/macppc 9.99.97 on Mac Mini G4 (PowerMac10,1) with internal SSD upgrade
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020, 2021 The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.99.79 (GENERIC) #0: Sun Jan 31 18:31:59 UTC 2021
[     1.000000]         xxx@xxx.xxx:/usr/src/sys/arch/macppc/compile/GENERIC
[     1.000000] total memory = 1024 MB
[     1.000000] oea_startup: failed to allocate DEAD ZONE: error=12
[     1.000000] avail memory = 977 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] found openpic PIC at 80040000
[     1.000000] OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
[     1.000000] bootpath: /pci@f4000000/ata-6@d/disk@0:0/netbsd.gz
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0: 7447A (Revision 1.2), ID 0 (primary)
[     1.000000] cpu0: HID0 0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>, powersave: 1
[     1.000000] cpu0: 1416.67 MHz, 512KB L2 cache no parity
[     1.000000] memory0 at mainbus0: len=128
[     1.000000] spdmem0 at memory0
[     1.000000] spdmem0: DDR SDRAM, no parity or ECC, 1GB, 400MHz (PC-3200)
[     1.000000] spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time
[     1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 2-3-3-8
[     1.000000] spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
[     1.000000] uni_n0 at mainbus0 address 0xf8000000
[     1.000000] hw-clock at uni_n0 not configured
[     1.000000] ki2c0 at uni_n0 address 0xf8001000
[     1.000000] iic0 at ki2c0: I2C bus
[     1.000000] cereal at iic0 addr 0xe0 not configured
[     1.000000] uninorth0 at mainbus0
[     1.000000] pci0 at uninorth0 bus 0
[     1.000000] pci0: i/o space, memory space enabled
[     1.000000] pchb0 at pci0 dev 11 function 0
[     1.000000] pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
[     1.000000] radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 9200 5962 (rev. 0x01)
[     1.000000] trying to read disabled BIOS...
[     1.000000] radeonfb0: No video BIOS, using default clocks
[     1.000000] radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
[     1.000000] radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000
[     1.000000] radeonfb0: display 0: initial virtual resolution 1920x1080 at 8 bpp
[     1.000000] radeonfb0: using 32 MB per display
[     1.000000] radeonfb0: port 0: physical 1920x1080 60Hz
[     1.000000] radeonfb0: port 1: physical 1920x1080 60Hz
[     1.000000] wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] drm at radeonfb0 not configured
[     1.000000] uninorth1 at mainbus0
[     1.000000] pci1 at uninorth1 bus 0
[     1.000000] pci1: i/o space, memory space enabled
[     1.000000] pchb1 at pci1 dev 11 function 0
[     1.000000] pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
[     1.000000] bwi0 at pci1 dev 18 function 0: Broadcom Wireless
[     1.000000] bwi0: interrupting at irq 52
[     1.000000] bwi0: BBP id 0x4306, BBP rev 0x3, BBP pkg 0
[     1.000000] bwi0: MAC: rev 5
[     1.000000] bwi0: PHY type 2, rev 2, ver 2
[     1.000000] bwi0: RF manu 0x17f, type 0x2050, rev 2
[     1.000000] bwi0: autoconfiguration error: invalid antenna gain in sprom
[     1.000000] obio0 at pci1 dev 23 function 0: addr 0x80000000
[     1.000000] zsc0 at obio0 irq 22,23
[     1.000000] zstty0 at zsc0 channel 0
[     1.000000] zstty1 at zsc0 channel 1
[     1.000000] snapper0 at obio0 offset 0x10000: irq 30,1,2
[     1.000000] pmu0 at obio0 offset 0x16000 irq 47:  rev. 85
[     1.000000] pmu0: initializing IIC bus
[     1.000000] iic1 at pmu0: I2C bus
[     1.000000] admtemp0 at iic1 addr 0x48: MAX6642 temperature sensor: id. 0x4d, rev. 0x4d
[     1.000000] pmu0: initializing RTC
[     1.000000] pmu0: power-mgt not configured
[     1.000000] pmu0: pmu-pwm-fans not configured
[     1.000000] ki2c1 at obio0
[     1.000000] iic2 at ki2c1: I2C bus
[     1.000000] cereal at iic2 addr 0xe0 not configured
[     1.000000] wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer
[     1.000000] atabus0 at wdc0 channel 0
[     1.000000] snapper0: software codec
[     1.000000] audio0 at snapper0: playback, capture, full duplex
[     1.000000] audio0: slinear_be:16 -> slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for playback
[     1.000000] audio0: slinear_be:16 <- slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for recording
[     1.000000] spkr0 at audio0: PC Speaker (synthesized)
[     1.000000] wsbell at spkr0 not configured
[     1.000000] ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
[     1.000000] ohci0: autoconfiguration error: memory access is disabled
[     1.000000] ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
[     1.000000] ohci1: autoconfiguration error: memory access is disabled
[     1.000000] ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
[     1.000000] ohci2: interrupting at irq 29
[     1.000000] ohci2: OHCI version 1.0, legacy support
[     1.000000] usb0 at ohci2: USB revision 1.0
[     1.000000] ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
[     1.000000] ohci3: interrupting at irq 63
[     1.000000] ohci3: OHCI version 1.0
[     1.000000] usb1 at ohci3: USB revision 1.0
[     1.000000] ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
[     1.000000] ohci4: interrupting at irq 63
[     1.000000] ohci4: OHCI version 1.0
[     1.000000] usb2 at ohci4: USB revision 1.0
[     1.000000] ehci0 at pci1 dev 27 function 2: NEC USB2 Host Controller (rev. 0x04)
[     1.000000] ehci0: interrupting at irq 63
[     1.000000] ehci0: EHCI version 1.0
[     1.000000] ehci0: 2 companion controllers, 3 ports each: ohci3 ohci4
[     1.000000] usb3 at ehci0: USB revision 2.0
[     1.000000] uninorth2 at mainbus0
[     1.000000] pci2 at uninorth2 bus 0
[     1.000000] pci2: i/o space, memory space enabled
[     1.000000] pchb2 at pci2 dev 11 function 0
[     1.000000] pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
[     1.000000] wdc1 at pci2 dev 13 function 0: interrupting at irq 39
[     1.000000] atabus1 at wdc1 channel 0
[     1.000000] fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
[     1.000000] fwohci0: interrupting at irq 40
[     1.000000] fwohci0: OHCI version 1.10 (ROM=0)
[     1.000000] fwohci0: No. of Isochronous channels is 8.
[     1.000000] fwohci0: EUI64 xx:xx:xx:xx:xx:xx:76:b6
[     1.000000] fwohci0: Phy 1394a available S400, 2 ports.
[     1.000000] fwohci0: Link S400, max_rec 2048 bytes.
[     1.000000] ieee1394if0 at fwohci0: IEEE1394 bus
[     1.000000] fwip0 at ieee1394if0: IP over IEEE1394
[     1.000000] fwohci0: Initiate bus reset
[     1.000000] fwohci0: Clear PME# now
[     1.000000] gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
[     1.000000] gem0: interrupting at irq 41
[     1.000000] bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
[     1.000000] bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     1.000000] gem0: Ethernet address xx:xx:xx:xx:xx:xx, 10KB RX fifo, 4KB TX fifo
[     1.000000] vmmask 737c0000 schedmask 7ffc0000 highmask 7ffc0000
[     1.000000] entropy: WARNING: extracting entropy too early
[     1.000000] timecounter: Timecounter "mftb" frequency 41620997 Hz quality 100
[     1.000019] fwohci0: BUS reset
[     1.000019] fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
[     1.000019] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[     1.000019] ieee1394if0: bus manager 0
[     1.000019] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.099993] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.099993] uhub0: 2 ports with 2 removable, self powered
[     1.099993] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.099993] uhub1: 3 ports with 3 removable, self powered
[     1.099993] uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.099993] uhub2: 2 ports with 2 removable, self powered
[     1.099993] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.099993] uhub3: 5 ports with 5 removable, self powered
[     1.099993] IPsec: Initialized Security Association Processing.
[     1.099993] aes: BearSSL aes_ct
[     1.099993] aes_ccm: self-test passed
[     1.099993] chacha: Portable C ChaCha
[     1.099993] blake2s: self-test passed
[     1.120004] atapibus0 at atabus1: 2 targets
[     1.129996] cd0 at atapibus0 drive 1: <MATSHITADVD-R   UJ-835F, , GGND> cdrom removable
[     1.129996] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
[     1.129996] wd0 at atabus1 drive 0
[     1.129996] wd0: <KINGSTON SUV500MS240G>
[     1.129996] wd0: drive supports 1-sector PIO transfers, LBA48 addressing
[     1.129996] wd0: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors (4096 bytes/physsect; first aligned sector: 8)
[     1.129996] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA
[     1.129996] wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), WRITE DMA FUA EXT
[     1.129996] cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA)
[     3.349988] uhub4 at uhub3 port 2: SMSC (0x0424) product 2507 (0x2507), class 9/0, rev 2.00/0.00, addr 2
[     3.349988] uhub4: multiple transaction translators
[     3.349988] uhub4: 7 ports with 7 removable, self powered
[     3.389989] uhidev0 at uhub0 port 1 configuration 1 interface 0
[     3.389989] uhidev0: Apple Computer (0x05ac) Bluetooth HCI (HID-proxy mode) (0x1000), rev 1.10/15.38, addr 2, iclass 3/1
[     3.429988] ukbd0 at uhidev0
[     3.839988] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[     3.839988] uhidev1 at uhub0 port 1 configuration 1 interface 1
[     3.839988] uhidev1: Apple Computer (0x05ac) Bluetooth HCI (HID-proxy mode) (0x1000), rev 1.10/15.38, addr 2, iclass 3/1
[     3.889988] ums0 at uhidev1: 5 buttons
[     3.889988] wsmouse0 at ums0 mux 0
[     4.659986] umass0 at uhub4 port 1 configuration 1 interface 0
[     4.659986] umass0: LaCie (0x059f) LaCie Mini Hub USB (0x06b1), rev 2.00/0.00, addr 3
[     4.659986] umass0: using SCSI over Bulk-Only
[     4.659986] scsibus0 at umass0: 2 targets, 1 lun per target
[     4.959986] sd0 at scsibus0 target 0 lun 0: <Maxtor, 6L300R0, BAJ4> disk fixed
[     4.959986] sd0: 279 GB, 581463 cyl, 16 head, 63 sec, 512 bytes/sect x 586114704 sectors
[     5.639985] uhub5 at uhub4 port 4: Genesys Logic (0x05e3) USB2.0 Hub (0x0608), class 9/0, rev 2.00/85.36, addr 4
[     5.639985] uhub5: single transaction translator
[     5.639985] uhub5: 4 ports with 4 removable, self powered
[     6.949984] uhub5: port 4, set config at addr 5 failed
[     6.949984] uhub5: autoconfiguration error: device problem, disabling port 4
[     6.959987] swwdog0: software watchdog initialized
[     6.959987] WARNING: 4 errors while detecting hardware; check system log.
[     6.959987] boot device: wd0
[     6.959987] root on wd0a dumps on wd0b
[     6.959987] root file system type: ffs
[     6.959987] kern.module.path=/stand/macppc/9.99.79/modules
[     7.389997] entropy: ready
[     9.769993] bwi0: firmware rev 0x0127, patch level 0x000e
[    12.230014] wsdisplay0: screen 1 added (fb, vt100 emulation)
[    12.250012] wsdisplay0: screen 2 added (fb, vt100 emulation)
[    12.270012] wsdisplay0: screen 3 added (fb, vt100 emulation)
[    12.290014] wsdisplay0: screen 4 added (fb, vt100 emulation)
[    16.990041] bwi0: autoconfiguration error: device timeout
mac-mini:thorpej 36$