Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2021-02-02 05:42:25
From: nick
Description: FreeBSD/amd64 on Apple Inc. MacBook3,1
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE-p1 GENERIC amd64
FreeBSD clang version 10.0.1 (xxx@xxx.xxx:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(efifb): resolution 1280x800
CPU: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz (2194.55-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x6fb  Family=0x6  Model=0xf  Stepping=11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4075433984 (3886 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <APPLE  Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 1 != hw id 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC-low" frequency 1097276141 Hz quality 1000
random: entropy device external interface
kbd0 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3110-0x3117 mem 0xd0100000-0xd01fffff,0xc0000000-0xcfffffff at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 15868k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xd0200000-0xd02fffff at device 2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x30c0-0x30df at device 26.0 on pci0
uhci0: LegSup = 0x3000
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x30a0-0x30bf at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xd0704c00-0xd0704fff at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801H HDA Controller> mem 0xd0700000-0xd0703fff at device 27.0 on pci0
pcib1: <PCI-PCI bridge> at device 28.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib2: failed to allocate initial prefetch window: 0xd0000000-0xd00fffff
pci2: <ACPI PCI bus> on pcib2
bwn_pci0: <Broadcom BCM4321 802.11n Dual-Band Wireless> mem 0xd0500000-0xd0503fff at device 0.0 on pci2
bhndb0: <PCI-BHND bridge> on bwn_pci0
bhndb0: Using MSI interrupts on bwn_pci0
bhnd_nvram0: <SPROM/OTP> mem 0xd0501000-0xd0501fff on bhndb0
bhnd0: <BCM4321 SIBA bus> on bhndb0
bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 19> mem 0x18000000-0x18000dff,0x18000f00-0x18000fff,0x18000e00-0x18000eff irq 0 at core 0 on bhnd0
bhnd_pwrctl0: <ChipCommon Power Control> on bhnd_chipc0
gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff on bhnd_chipc0
bhnd_hostb0: <Broadcom PCIe-G1 Host-PCI bridge, rev 4> mem 0x18002000-0x18002dff,0-0x7fffffff,0x18002f00-0x18002fff,0x18002e00-0x18002eff irq 2 at core 2 on bhnd0
bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 12> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 1 at core 1 on bhnd0
bwn0: bwn_phy_n_attach: BWN_GPL_PHY not in kernel config; no PHY-N support
bwn0: failed
device_attach: bwn0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
mskc0: <Marvell Yukon 88E8058 Gigabit Ethernet> port 0x2000-0x20ff mem 0xd0400000-0xd0403fff at device 0.0 on pci3
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0
msk0: Using defaults for TSO: 65518/35/2048
msk0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x3080-0x309f at device 29.0 on pci0
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x3060-0x307f at device 29.1 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x3040-0x305f at device 29.2 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xd0704800-0xd0704bff at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x3108-0x310f,0x3124-0x3127,0x3100-0x3107,0x3120-0x3123,0x30e0-0x30ef at device 31.1 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH8M AHCI SATA controller> port 0x30f8-0x30ff,0x311c-0x311f,0x30f0-0x30f7,0x3118-0x311b,0x3020-0x303f mem 0xd0704000-0xd07047ff at device 31.2 on pci0
ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
battery0: <ACPI Control Method Battery> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC889A HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC889A (Internal Analog 3.1/2.0)> at nid 20,22 and 24 on hdaa0
pcm1: <Realtek ALC889A (Rear Analog)> at nid 21 and 26 on hdaa0
pcm2: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa0
ugen6.1: <Intel EHCI root HUB> at usbus6
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 CAM
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0 in 'Slot 00', SATA Slot: scbus1 target 0
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <WDC WDS120G2G0A-00JH30 UE450000> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114480MB (234455040 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA DVD-R   UJ-857E ZF1E> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub4: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2 usbus6
uhub5: 4 ports with 4 removable, self powered
uhub0: 6 ports with 6 removable, self powered
Root mount waiting for: usbus6
ugen6.2: <vendor 0x05ac product 0x8300> at usbus6
ugen0.2: <vendor 0x05ac product 0x1000> at usbus0
ukbd0 on uhub6
ukbd0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0
kbd1 at ukbd0
ugen5.2: <Apple Computer, Inc. IR Receiver> at usbus5
info: [drm] Initialized drm 1.1.0 20060810
drmn0: =======================================================
drmn0: This code is deprecated.  Install the graphics/drm-kmod pkg
drmn0: =======================================================
drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers
drmn0: =======================================================
drmn0: This code is deprecated.  Install the graphics/drm-kmod pkg
drmn0: =======================================================
drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers
drmn0: <Intel i965GM> on vgapci0
intel_iicbb0 on drmn0
iicbus0: <Philips I2C bus> on iicbb_nostop0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn0
iicbus2: <Philips I2C bus> on iicbb_nostop1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn0
iicbus4: <Philips I2C bus> on iicbb_nostop2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn0
iicbus6: <Philips I2C bus> on iicbb_nostop3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn0
iicbus8: <Philips I2C bus> on iicbb_nostop4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn0
iicbus10: <Philips I2C bus> on iicbb_nostop5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] failed to find VBIOS tables
intel_sdvo_ddc_proxy397632 on drmn0
ugen5.3: <Apple Computer Apple Internal Keyboard / Trackpad> at usbus5
ukbd1 on uhub1
ukbd1: <Apple Internal Keyboard> on usbus5
kbd2 at ukbd1
intel_sdvo_ddc_proxy397632: detached
intel_sdvo_ddc_proxy397664 on drmn0
intel_sdvo_ddc_proxy397664: detached
drmn0: taking over the fictitious range 0xc0000000-0xd0000000
info: [drm] initialized overlay support
info: [drm] Connector LVDS-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.LVDS-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector SVIDEO-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.SVIDEO-1
info: [drm]   - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "efifb" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
lo0: link state changed to UP
msk0: link state changed to DOWN
msk0: link state changed to UP
ums0 on uhub6
ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0
ums0: 5 buttons and [XY] coordinates ID=0
uhid0 on uhub1
uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on usbus5
ums1 on uhub1
ums1: <Touchpad> on usbus5
ums1: 3 buttons and [XY] coordinates ID=2
uhid1 on uhub1
uhid1: <Apple Internal Keyboard> on usbus5