Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2021-03-14 11:34:08
From: Auv
Description: OpenBSD 6.9-beta @ RPi 4B (4GB)
OpenBSD 6.9-beta (GENERIC.MP) #1073: Sat Mar 13 21:54:22 MST 2021
    xxx@xxx.xxx:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 4125155328 (3934MB)
avail mem = 3966017536 (3782MB)
random: good seed from bootblocks
mainbus0 at root: ACPI
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3
cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
cpu0: CRC32,ASID16
cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3
cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu1: 1024KB 64b/line 16-way L2 cache
cpu1: CRC32,ASID16
cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3
cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu2: 1024KB 64b/line 16-way L2 cache
cpu2: CRC32,ASID16
cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3
cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu3: 1024KB 64b/line 16-way L2 cache
cpu3: CRC32,ASID16
efi0 at mainbus0: UEFI 2.7
efi0: https://github.com/pftf/RPi4 rev 0x10000
smbios0 at efi0: SMBIOS 3.3.0
smbios0: vendor https://github.com/pftf/RPi4 version "UEFI Firmware v1.24" date 02/26/2021
smbios0: Raspberry Pi Foundation Raspberry Pi 4 Model B
apm0 at mainbus0
ampintc0 at mainbus0 nirq 256, ncpu 4 ipi: 0, 1: "interrupt-controller"
agtimer0 at mainbus0: 54000 kHz
acpi0 at mainbus0: ACPI 6.3
acpi0: sleep states
acpi0: tables DSDT FACP CSRT DBG2 GTDT IORT APIC PPTT SSDT BGRT
acpi0: wakeup devices
acpiiort0 at acpi0
"BCM2849" at acpi0 not configured
"BCM2835" at acpi0 not configured
"BCM2854" at acpi0 not configured
"ACPI0004" at acpi0 not configured
xhci0 at acpi0 XHC0 addr 0x600000000/0x1000 irq 175, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0004" at acpi0 not configured
"BCM2848" at acpi0 not configured
"BCM2850" at acpi0 not configured
"BCM2856" at acpi0 not configured
"BCM2845" at acpi0 not configured
"BCM2841" at acpi0 not configured
"BCM2841" at acpi0 not configured
"BCM2838" at acpi0 not configured
"BCM2839" at acpi0 not configured
"BCM2844" at acpi0 not configured
pluart0 at acpi0 URT0 addr 0xfe201000/0x1000 irq 153
"BCM2836" at acpi0 not configured
"BCM2EA6" at acpi0 not configured
"MSFT8000" at acpi0 not configured
sdhc0 at acpi0 SDC1 addr 0xfe300000/0x100 irq 158
sdhc0: SDHC 3.0, 250 MHz base clock
sdmmc0 at sdhc0: 4-bit
bse0 at acpi0 ETH0 addr 0xfd580000/0x10000 irq 189: address xx:xx:xx:xx:xx:xx
brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2
"PNP0C06" at acpi0 not configured
"ACPI0004" at acpi0 not configured
sdhc1 at acpi0 SDC3 addr 0xfe340000/0x100 irq 158
sdhc1: SDHC 3.0, 100 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52
acpitz0 at acpi0: critical temperature is 90 degC
simplefb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, SD01G, 0045> removable
sd0: 922MB, 512 bytes/sector, 1888256 sectors
bwfm0 at sdmmc0 function 1
manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 2 not configured
manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 3 not configured
uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev 2.10/4.21 addr 2
umass0 at uhub1 port 1 configuration 1 interface 0 "SanDisk' Cruzer Fit" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SanDisk', Cruzer Fit, 1.00> removable serial.07815571093020223910
sd1: 29340MB, 512 bytes/sector, 60088320 sectors
uhidev0 at uhub1 port 3 configuration 1 interface 0 "Chicony HP Elite USB Keyboard" rev 1.10/1.21 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 1 "Chicony HP Elite USB Keyboard" rev 1.10/1.21 addr 4
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhidev2 at uhub1 port 4 configuration 1 interface 0 "PixArt HP USB Optical Mouse" rev 2.00/1.00 addr 5
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (3278478f7a494566.a) swap on sd1b dump on sd1b
bwfm0: failed loadfirmware of file brcmfmac43455-sdio.bin