Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-03-31 02:25:33
From: GulDukat
Description: Raspberry pi 4B (4GB) OpenBSD-6.9 beta snapshot
OpenBSD 6.9-beta (GENERIC.MP) #1100: Tue Mar 30 17:10:02 MDT 2021 [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP real mem = 4121751552 (3930MB) avail mem = 3962662912 (3779MB) random: good seed from bootblocks mainbus0 at root: Raspberry Pi 4 Model B Rev 1.2 psci0 at mainbus0: PSCI 1.1, SMCCC 1.2 cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3 cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu0: 1024KB 64b/line 16-way L2 cache cpu0: CRC32,ASID16 cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3 cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu1: 1024KB 64b/line 16-way L2 cache cpu1: CRC32,ASID16 cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3 cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu2: 1024KB 64b/line 16-way L2 cache cpu2: CRC32,ASID16 cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3 cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu3: 1024KB 64b/line 16-way L2 cache cpu3: CRC32,ASID16 efi0 at mainbus0: UEFI 2.7 efi0: https://github.com/pftf/RPi4 rev 0x10000 smbios0 at efi0: SMBIOS 3.3.0 smbios0: vendor https://github.com/pftf/RPi4 version "UEFI Firmware v1.25" date 03/25/2021 smbios0: Raspberry Pi Foundation Raspberry Pi 4 Model B apm0 at mainbus0 "system" at mainbus0 not configured "axi" at mainbus0 not configured simplebus0 at mainbus0: "soc" bcmclock0 at simplebus0 bcmmbox0 at simplebus0 bcmgpio0 at simplebus0 bcmaux0 at simplebus0 ampintc0 at simplebus0 nirq 256, ncpu 4 ipi: 0, 1: "interrupt-controller" bcmtmon0 at simplebus0 bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 "timer" at simplebus0 not configured pluart0 at simplebus0 com0 at simplebus0: ns16550, no working fifo "local_intc" at simplebus0 not configured bcmdog0 at simplebus0 bcmirng0 at simplebus0 "firmware" at simplebus0 not configured "power" at simplebus0 not configured "mailbox" at simplebus0 not configured sdhc0 at simplebus0 sdhc0: SDHC 3.0, 250 MHz base clock sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed "gpiomem" at simplebus0 not configured "fb" at simplebus0 not configured "vcsm" at simplebus0 not configured "clocks" at mainbus0 not configured "phy" at mainbus0 not configured "clk-27M" at mainbus0 not configured "clk-108M" at mainbus0 not configured simplebus1 at mainbus0: "emmc2bus" sdhc1 at simplebus1 sdhc1: SDHC 3.0, 100 MHz base clock sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52, dma "arm-pmu" at mainbus0 not configured agtimer0 at mainbus0: 54000 kHz simplebus2 at mainbus0: "scb" bcmpcie0 at simplebus2 pci0 at bcmpcie0 ppb0 at pci0 dev 0 function 0 "Broadcom BCM2711" rev 0x10 pci1 at ppb0 bus 1 xhci0 at pci1 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: intx, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 addr 1 bse0 at simplebus2: address xx:xx:xx:xx:xx:xx brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2 "dma" at simplebus2 not configured "hevc-decoder" at simplebus2 not configured "rpivid-local-intc" at simplebus2 not configured "h264-decoder" at simplebus2 not configured "vp9-decoder" at simplebus2 not configured "leds" at mainbus0 not configured "sd_io_1v8_reg" at mainbus0 not configured "sd_vcc_reg" at mainbus0 not configured "fixedregulator_3v3" at mainbus0 not configured "fixedregulator_5v0" at mainbus0 not configured simplebus3 at mainbus0: "v3dbus" "bootloader" at mainbus0 not configured simplefb0 at mainbus0: 1920x1080, 32bpp wsdisplay0 at simplefb0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) scsibus0 at sdmmc1: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SDU1, 0010> removable sd0: 14910MB, 512 bytes/sector, 30535680 sectors uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev 2.10/4.21 addr 2 bwfm0 at sdmmc0 function 1 manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 2 not configured manufacturer 0x02d0, product 0xa9a6 at sdmmc0 function 3 not configured uhidev0 at uhub1 port 4 configuration 1 interface 0 "SEM HCT Keyboard" rev 1.10/1.10 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub1 port 4 configuration 1 interface 1 "SEM HCT Keyboard" rev 1.10/1.10 addr 3 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 umass0 at uhub0 port 2 configuration 1 interface 0 "Asmedia ASM236X series" rev 3.20/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: <Samsung, SSD 970 EVO Plus, 0> serial.xxxxxxxxxx sd1: 238475MB, 512 bytes/sector, 488397168 sectors vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd1a (e4880dc2c7c0ef18.a) swap on sd1b dump on sd1b gpio0 at bcmgpio0: 58 pins --- Did not test X11 but text console DOES work with current firmware specify 'set tty fb0' at loader prompt.