Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-04-02 06:53:37
From: rin
Description: NetBSD/evbppc 9.99.81 on DHT Walnut 405GP Evaluation Board
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.81 (DHT) #160: Thu Apr 1 17:51:30 JST 2021
rin@latipes:/sys/arch/evbppc/compile/DHT
Model: DHT Walnut 405GP Evaluation Board
total memory = 128 MB
avail memory = 119 MB
timecounter: Timecounters tick every 10.000 msec
plb0 (root)
cpu0 at plb0: 267MHz 405GP (PVR 0x40110145)
cpu0: 16KB/32B L1 instruction cache
cpu0: 8KB/32B L1 data cache
ecc0 at plb0 irq 17: ECC controller
opb0 at plb0
com0 at opb0 addr 0xef600300 irq 0: ns16550a, 1-byte FIFO
com0: console
com1 at opb0 addr 0xef600400 irq 1: ns16550a, 1-byte FIFO
emac0 at opb0 addr 0xef600800 irq 15: Ethernet Media Access Controller
emac0: Ethernet address [_MAC_XXXXXXXXXX]
nsphyter0 at emac0 phy 9: DP83843 10/100 media interface, rev. 0
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
opbgpio0 at opb0 addr 0xef600700: On-Chip GPIO controller
gpio0 at opbgpio0: 24 pins
gpiic at opb0 addr 0xef600500 irq 2 not configured
wdog0 at opb0: 4 second period
pchb0 at plb0
pchb0: IBM PPC 405GP PCI Bridge (rev. 0x01)
pci0 at pchb0
pci0: i/o space, memory space enabled
IBM PPC 405GP PCI Bridge (host bridge, revision 0x01) at pci0 dev 0 function 0 not configured
wm0 at pci0 dev 2 function 0: Intel i82541GI 1000BASE-T Ethernet (rev. 0x05)
wm0: autoconfiguration error: WARNING: I/O BAR at zero.
wm0: interrupting at irq 29
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x220002<LOCK_EECD,ASF_FIRM,WOL>
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb0 at pci0 dev 3 function 0: Pericom Semiconductors PI7C9X111SL PCIe to PCI Reverse Bridge (rev. 0x02)
ppb0: PCI Express capability version 1 <PCI/PCI-X to PCI-E Bridge> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ahcisata0 at pci1 dev 0 function 0: Samsung Electronics (3rd vendor ID) XP941 M.2 SSD (rev. 0x01)
ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP 0xc3349f80<CCCS,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
ahcisata0: interrupting at irq 30
atabus0 at ahcisata0 channel 0
pdcide0 at pci0 dev 4 function 0: Promise Ultra100/ATA Bus Master IDE Accelerator (rev. 0x02)
pdcide0: bus-master DMA support present
pdcide0: primary channel configured to native-PCI mode
pdcide0: using irq 31 for native-PCI interrupt
atabus1 at pdcide0 channel 0
pdcide0: secondary channel configured to native-PCI mode
atabus2 at pdcide0 channel 1
vmmask 7cf00000 schedmask 7cf00000 highmask 7ff80000
entropy: WARNING: extracting entropy too early
Setting PIT to 266666666/100 = 2666666
timecounter: Timecounter "ppc_timebase" frequency 266666666 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
aes: BearSSL aes_ct
aes_ccm: self-test passed
chacha: Portable C ChaCha
blake2s: self-test passed
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: <SAMSUNG MZHPU512HCGL-00004>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x 1000215216 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
WARNING: 1 error while detecting hardware; check system log.
root on wd0a dumps on wd0b
kern.module.path=/stand/powerpc-ibm4xx/9.99.81/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!