Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2021-04-08 18:11:40
From: SteveG
Description: Globalscale Technologies Sheeva64
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.8 (GENERIC.MP) #828: Sun Oct  4 20:35:47 MDT 2020
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 1032699904 (984MB)
avail mem = 968622080 (923MB)
random: good seed from bootblocks
mainbus0 at root: gti sheeva64 development board
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 256KB 64b/line 16-way L2 cache
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 256KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.0.5
efi0: Das U-boot rev 0x0
apm0 at mainbus0
agtimer0 at mainbus0: tick rate 12500 KHz
"pmu" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
simplebus1 at simplebus0: "internal-regs"
syscon0 at simplebus1: "system-controller"
syscon1 at simplebus1: "avs"
mvclock0 at simplebus1
mvclock1 at simplebus1
mvclock2 at simplebus1
mvpinctrl0 at simplebus1
syscon2 at simplebus1: "syscon"
mvpinctrl1 at simplebus1
syscon3 at simplebus1: "system-controller"
syscon4 at simplebus1: "system-controller"
agintc0 at simplebus1 shift 4:3 nirq 224 nredist 2 ipi: 0, 1: "interrupt-controller"
mvdog0 at simplebus1
mvspi0 at simplebus1
mviic0 at simplebus1
iic0 at mviic0
pcxrtc0 at iic0 addr 0x51: battery ok
mvuart0 at simplebus1
"phy" at simplebus1 not configured
mvneta0 at simplebus1
mvneta0: Ethernet address [_MAC_XXXXXXXXXX]
mvmdio0 at simplebus1
mvneta1 at simplebus1
mvneta1: Ethernet address [_MAC_XXXXXXXXXX]
xhci0 at simplebus1, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
"phy" at simplebus1 not configured
"usb" at simplebus1 not configured
"phy" at simplebus1 not configured
"xor" at simplebus1 not configured
"crypto" at simplebus1 not configured
"mailbox" at simplebus1 not configured
sdhc0 at simplebus1
sdhc0: SDHC 3.0, 400 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, ddr52, dma
sdhc1 at simplebus1
sdhc1: SDHC 3.0, 400 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
ukphy0 at mvneta0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x005043, model 0x001d
ukphy1 at mvneta1 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI 0x005043, model 0x001d
"usb3-vbus" at mainbus0 not configured
"usb2-vbus" at mainbus0 not configured
"wifi-vbus" at mainbus0 not configured
"regulator" at mainbus0 not configured
"usb3-phy" at mainbus0 not configured
"usb2-phy" at mainbus0 not configured
"gpio-leds" at mainbus0 not configured
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, SEM04G, 0000> removable
sd0: 3776MB, 512 bytes/sector, 7733248 sectors
scsibus1 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SD16G, 0030> removable
sd1: 15264MB, 512 bytes/sector, 31260672 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd1a (69460dfe3e00a3a9.a) swap on sd1b dump on sd1b
Automatic boot in progress: starting file system checks.
/dev/sd1a (69460dfe3e00a3a9.a): file system is clean; not checking
/dev/sd1l (69460dfe3e00a3a9.l): file system is clean; not checking
/dev/sd1d (69460dfe3e00a3a9.d): file system is clean; not checking
/dev/sd1f (69460dfe3e00a3a9.f): file system is clean; not checking
/dev/sd1g (69460dfe3e00a3a9.g): file system is clean; not checking
/dev/sd1h (69460dfe3e00a3a9.h): file system is clean; not checking
/dev/sd1k (69460dfe3e00a3a9.k): file system is clean; not checking
/dev/sd1j (69460dfe3e00a3a9.j): file system is clean; not checking
/dev/sd1e (69460dfe3e00a3a9.e): file system is clean; not checking
pf enabled
starting network
mvneta0:[_IP_XXXXXXXX] lease accepted from[_IP_XXXXXXXX] (xx:xx:xx:xx:xx:xx)
reordering libraries:  done.
openssl: generating isakmpd/iked RSA keys... done.
ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Path to firmware: http://firmware.openbsd.org/firmware/6.8/
No devices found which need firmware files to be downloaded.
Checking for available binary patches...
Run syspatch(8) to install:
001_bgpd002_icmp6003_tmux004_wg005_unwind
006_rpki008_asn1009_exit010_smtpd011_nd6
012_carp013_libressl014_pffrag015_sshagent016_npppd
017_libssl
starting local daemons: cron.
Thu Apr  8 13:15:38 EDT 2021

OpenBSD/arm64 (s64obsd68.rsilocal.local) (console)

login: