Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2021-05-28 23:02:45
From: anarro
Description: FreeBSD/i386 on HP ProLiant DL380 G5
---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-RELEASE-p6 GENERIC i386 FreeBSD clang version 10.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz (2000.04-MHz 686-class CPU) Origin="GenuineIntel" Id=0x6f7 Family=0x6 Model=0xf Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4e33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA> AMD Features=0x20000000<LM> AMD Features2=0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 3390251008 (3233 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <HP 00000083> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20200430/tbfadt-850) ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 3 2 4 5 6 1 7 Timecounter "TSC" frequency 2000043156 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0x14c8b10, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <HP P56> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 ACPI Warning: \134_SB.PCI0.PT02._PRT: Return Package has no elements (empty) (20200430/nsprepkg-251) pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci2 pci5: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 0.3 on pci1 pci6: <PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci7: <ACPI PCI bus> on pcib7 ciss0: <HP Smart Array P400> port 0x4000-0x40ff mem 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 18 at device 0.0 on pci7 ciss0: PERFORMANT Transport pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <PCI-PCI bridge> at device 5.0 on pci0 pci9: <PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci10: <ACPI PCI bus> on pcib10 pcib11: <PCI-PCI bridge> at device 7.0 on pci0 pci11: <PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci12: <ACPI PCI bus> on pcib12 pcib13: <PCI-PCI bridge> at device 0.0 on pci12 pci13: <PCI bus> on pcib13 bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci13 bce0: /usr/src/sys/dev/bce/if_bce.c(1284): Management firmware enabled but not running! miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Using defaults for TSO: 65518/35/2048 bce0: Ethernet address: [_MAC_XXXXXXXXXX] bce0: bce0: link state changed to DOWN ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib14: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci14: <ACPI PCI bus> on pcib14 pcib15: <PCI-PCI bridge> at device 0.0 on pci14 pci15: <PCI bus> on pcib15 bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 17 at device 0.0 on pci15 bce1: /usr/src/sys/dev/bce/if_bce.c(1284): Management firmware enabled but not running! miibus1: <MII bus> on bce1 brgphy1: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Using defaults for TSO: 65518/35/2048 bce1: Ethernet address: [_MAC_XXXXXXXXXX] bce1: bce1: link state changed to DOWN ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!) Coal (RX:6,6,18,18; TX:20,20,80,80) uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf7df0000-0xf7df03ff irq 16 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci16: <ACPI PCI bus> on pcib16 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on pci16 vgapci0: Boot video device uhci4: <HP iLO Standard Virtual USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci16 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 pci16: <serial bus> at device 4.6 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_syscontainer0: <System Container> port 0x2e-0x2f,0x4e-0x4f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x30f on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff pnpid ORM0000 on isa0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. ppc0: parallel port not found. uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. Timecounters tick every 1.000 msec ugen1.1: <Intel UHCI root HUB> at usbus1 ugen4.1: <Intel EHCI root HUB> at usbus4 ugen0.1: <Intel UHCI root HUB> at usbus0 Trying to mount root from ufs:/dev/da0s1a [rw]... Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen3.1: <Intel UHCI root HUB> at usbus3 ugen5.1: <HP UHCI root HUB> at usbus5 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub4: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 da0 at ciss0 bus 0 scbus0 target 0 lun 0 da0: <HP RAID 5 OK> Fixed Direct Access SPC-3 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXX] da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 979874MB (2006782768 512 byte sectors) cd0 at ata0 bus 0 scbus2 target 0 lun 0 cd0: <HL-DT-ST RW/DVD GCC-C10N 2.00> Removable CD-ROM SCSI device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present uhub5: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered bce1: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006) bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006) ugen5.2: <HP Virtual Keyboard> at usbus5 ukbd0 on uhub4 ukbd0: <Virtual Keyboard> on usbus5 kbd2 at ukbd0 Root mount waiting for: usbus4 usbus5 ugen5.3: <HP Virtual Hub> at usbus5 uhub6 on uhub4 uhub6: <Virtual Hub> on usbus5 Root mount waiting for: usbus4 usbus5 uhub6: Root mount waiting for:7 ports with 7 removable, self powered usbus4 usbus5 uhub2: 8 ports with 8 removable, self powered mountroot: waiting for device /dev/da0s1a... WARNING: / was not properly dismounted ugen2.2: <vendor 0x0557 product 0x8021> at usbus2 uhub7 on uhub5 uhub7: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus2 uhub7: 4 ports with 4 removable, self powered ugen2.3: <ATEN International Co. Ltd B020-U08-19 V1.1.101> at usbus2 ukbd1 on uhub7 ukbd1: <ATEN International Co. Ltd B020-U08-19 V1.1.101, class 0/0, rev 1.10/1.00, addr 3> on usbus2 kbd3 at ukbd1 lo0: link state changed to UP bce1: Gigabit link up! bce1: link state changed to UP ums0 on uhub4 ums0: <Virtual Mouse> on usbus5 uhid0 on uhub7 uhid0: <ATEN International Co. Ltd B020-U08-19 V1.1.101, class 0/0, rev 1.10/1.00, addr 3> on usbus2 ums1 on uhub7 ums1: <ATEN International Co. Ltd B020-U08-19 V1.1.101, class 0/0, rev 1.10/1.00, addr 3> on usbus2 ums1: 5 buttons and [XYZ] coordinates ID=0 ums2 on uhub7 ums2: <ATEN International Co. Ltd B020-U08-19 V1.1.101, class 0/0, rev 1.10/1.00, addr 3> on usbus2