Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2021-06-12 17:45:49
From: jason
Description: FreeBSD/amd64 on Dell Inc. PowerEdge T110 II
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p1 #0: Wed May 26 22:15:09 UTC 2021 amd64
FreeBSD clang version 11.0.1 ( llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) CPU G850 @ 2.90GHz (2893.48-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x206a7  Family=0x6  Model=0x2a  Stepping=7
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4091887616 (3902 MB)
CPU microcode: updated from 0x25 to 0x2f
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
Timecounter "TSC-low" frequency 1446741146 Hz quality 1000
KTLS: Initialized 2 threads
random: entropy device external interface
000.000019 [4354] netmap_init               netmap: loaded module
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: No AES or SHA support.
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xc1206000-0xc12063ff irq 20 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a200> mem 0xc1100000-0xc110ffff irq 16 at device 0.0 on pci2
bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5722 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: xx:xx:xx:xx:xx:xx
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xc1205000-0xc12053ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> mem 0xc0000000-0xc07fffff,0xc1000000-0xc1003fff,0xc0800000-0xc0ffffff irq 19 at device 3.0 on pci3
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x2048-0x204f,0x2054-0x2057,0x2040-0x2047,0x2050-0x2053,0x2020-0x203f mem 0xc1204000-0xc12047ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
apei0: <ACPI Platform Error Interface> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcbfff,0xcc000-0xccfff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:/dev/ada0p2 [rw]...
Root mount waiting for: usbus0 usbus1 CAM
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1003FBYX-18Y7B0 01.01V02> ATA8-ACS SATA 2.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: (none) in 'Slot 04', SATA Slot: scbus1 target 0
cd0 at ahcich4 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD-ROM DH-16D6S BD11> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0 usbus1
uhub3: 6 ports with 6 removable, self powered
uhub2: 6 ports with 6 removable, self powered
ugen1.3: <Realtek RTL9210> at usbus1
umass0 on uhub2
umass0: <Realtek RTL9210, class 0/0, rev 2.10/21.00, addr 3> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:4:0: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <CT1000P1 SSD8 R013> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus1
ugen1.4: <CHICONY HP Basic USB Keyboard> at usbus1
ukbd0 on uhub2
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 4> on usbus1
kbd2 at ukbd0
mountroot: waiting for device /dev/ada0p2...
ichsmb0: <Intel Cougar Point SMBus controller> port 0x2000-0x201f mem 0xc1202000-0xc12020ff irq 19 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP