NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2021-07-07 16:01:32
From: Justin Yang
Description: OpenBSD 6.9-current on Rock pi N10

OpenBSD 6.9-current (GENERIC.MP) #1221: Mon Jun 28 12:43:16 MDT 2021
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 4038823936 (3851MB)
avail mem = 3839631360 (3661MB)
random: good seed from bootblocks
mainbus0 at root: Radxa ROCK Pi N10
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu1: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu2: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
cpu3: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu4 at mainbus0 mpidr 100: ARM Cortex-A72 r0p2
cpu4: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu4: 1024KB 64b/line 16-way L2 cache
cpu4: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu5 at mainbus0 mpidr 101: ARM Cortex-A72 r0p2
cpu5: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu5: 1024KB 64b/line 16-way L2 cache
cpu5: CRC32,SHA2,SHA1,AES+PMULL,ASID16
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20210400
apm0 at mainbus0
agintc0 at mainbus0 sec shift 3:3 nirq 288 nredist 6 ipi: 0, 1: "interrupt-controller"
agintcmsi0 at agintc0
syscon0 at mainbus0: "qos"
syscon1 at mainbus0: "qos"
syscon2 at mainbus0: "qos"
syscon3 at mainbus0: "qos"
syscon4 at mainbus0: "qos"
syscon5 at mainbus0: "qos"
syscon6 at mainbus0: "qos"
syscon7 at mainbus0: "qos"
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "power-management"
"power-controller" at syscon25 not configured
syscon26 at mainbus0: "syscon"
"io-domains" at syscon26 not configured
rkclock0 at mainbus0
rkclock1 at mainbus0
syscon27 at mainbus0: "syscon"
"io-domains" at syscon27 not configured
"usb2-phy" at syscon27 not configured
"usb2-phy" at syscon27 not configured
rkemmcphy0 at syscon27
"pcie-phy" at syscon27 not configured
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
syscon28 at mainbus0: "syscon"
syscon29 at mainbus0: "syscon"
"fit-images" at mainbus0 not configured
rkdrm0 at mainbus0
drm0 at rkdrm0
"pmu_a53" at mainbus0 not configured
"pmu_a72" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
simplebus0 at mainbus0: "bus"
"dma-controller" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
rkpcie0 at mainbus0
rkpcie0: link training timeout
dwge0 at mainbus0: rev 0x35, address [_MAC_XXXXXXXXXX]
rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 5
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma
sdhc0 at mainbus0
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma
ehci0 at mainbus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at mainbus0: version 1.0
ehci1 at mainbus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at mainbus0: version 1.0
rkdwusb0 at mainbus0: "usb"
xhci0 at rkdwusb0, xHCI 1.10
usb2 at xhci0: USB revision 3.0
uhub2 at usb2 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
rkiic0 at mainbus0
iic0 at rkiic0
rkiic1 at mainbus0
iic1 at rkiic1
pcxrtc0 at iic1 addr 0x51: battery low
rkiic2 at mainbus0
iic2 at rkiic2
com0 at mainbus0: ns16550, no working fifo
com1 at mainbus0: ns16550, no working fifo
com1: console
rktemp0 at mainbus0
rkiic3 at mainbus0
iic3 at rkiic3
rkpmic0 at iic3 addr 0x20: RK809
rkpwm0 at mainbus0
rkpwm1 at mainbus0
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"rga" at mainbus0 not configured
"efuse" at mainbus0 not configured
"phy" at mainbus0 not configured
"watchdog" at mainbus0 not configured
"rktimer" at mainbus0 not configured
rkvop0 at mainbus0: RK3399 VOPL
"iommu" at mainbus0 not configured
rkvop1 at mainbus0: RK3399 VOPB
"iommu" at mainbus0 not configured
"iommu" at mainbus0 not configured
"iommu" at mainbus0 not configured
rkdwhdmi0 at mainbus0: HDMI TX
rkdwhdmi0: version 2.11a, phytype 0xf3
"opp-table0" at mainbus0 not configured
"opp-table1" at mainbus0 not configured
"opp-table2" at mainbus0 not configured
"external-gmac-clock" at mainbus0 not configured
"vcc12v-dcin-regulator" at mainbus0 not configured
"vcc5v0-sys-regulator" at mainbus0 not configured
"vbus-host" at mainbus0 not configured
"vbus-typec" at mainbus0 not configured
"vcc-pcie-regulator" at mainbus0 not configured
"binman" at mainbus0 not configured
"dfi" at mainbus0 not configured
rkrng0 at mainbus0
"dmc" at mainbus0 not configured
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
dt: 445 probes
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SC64G, 0080> removable
sd0: 60906MB, 512 bytes/sector, 124735488 sectors
scsibus1 at sdmmc1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, UY5CS0, 0000> removable
sd1: 29952MB, 512 bytes/sector, 61341696 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (00f8555ecd9fde02.a) swap on sd0b dump on sd0b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
rkvop0: using CRTC 0 for RK3399 VOPL
rkvop1: using CRTC 1 for RK3399 VOPB
rkdrm0: 1024x768, 32bpp
wsdisplay0 at rkdrm0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.