Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2021-07-12 21:16:45
From: sadness
Description: NetBSD/sparc 9.0 on Axil 245 (SS5 clone)
Boot device: /iommu/sbus/espdma@4,8400000/esp@4,8800000/sd@0,0  File and args: 
>> NetBSD/sparc Secondary Boot, Revision 1.15 (Fri Feb 14 00:06:28 UTC 2020)
Booting netbsd
5380236+142788[298320]=0x5d29bc
OBP version 3, revision 2.15 (plugin rev 2)
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
[   1.0000000] 	xxx@xxx.xxx:/usr/src/sys/arch/sparc/compile/GENERIC
[   1.0000000] total memory = 65224 KB
[   1.0000000] avail memory = 57856 KB
[   1.0000000] bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@4,8400000/esp@4,8800000/sd@0,0
[   1.0000000] mainbus0 (root): SUNW,Axil-245: hostid xxxxxxxx
[   1.0000000] cpu0 at mainbus0: FMI,MB86904 @ 110 MHz, on-chip FPU
[   1.0000000] cpu0: 16K instruction (32 b/l), 8K data (16 b/l): cache enabled
[   1.0000000] obio0 at mainbus0
[   1.0000000] clock0 at obio0 slot 0 offset 0x200000: mk48t08
[   1.0000000] timer0 at obio0 slot 0 offset 0xd00000: delay constant 52, frequency = 2000000 Hz
[   1.0000060] zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
[   1.0000060] zstty0 at zs0 channel 0 (console i/o)
[   1.0000060] zstty1 at zs0 channel 1
[   1.0000060] zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
[   1.0000060] zstty4 at zs1 channel 0
[   1.0000060] kbd0 at zstty4
[   1.0000060] zstty5 at zs1 channel 1
[   1.0000060] ms0 at zstty5
[   1.0000060] wsmouse0 at ms0 mux 0
[   1.0000060] slavioconfig at obio0 slot 0 offset 0x800000 not configured
[   1.0000060] auxreg0 at obio0 slot 0 offset 0x900000
[   1.0000060] power0 at obio0 slot 0 offset 0x910000 level 2
[   1.0000060] fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached
[   1.0000060] iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0, page-size 4096, range 64MB
[   1.0000060] sbus0 at iommu0: clock = 22 MHz
[   1.0000060] dma0 at sbus0 slot 4 offset 0x8400000: DMA rev 2
[   1.0000060] esp0 at dma0 slot 4 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
[   1.0000060] scsibus0 at esp0: 8 targets, 8 luns per target
[   1.0000060] bpp0 at sbus0 slot 4 offset 0xc800000 level 2 (ipl 3): DMA rev 2
[   1.0000060] audioamd0 at sbus0 slot 4 offset 0x1300000 level 7 (ipl 13) softpri 4
[   1.0000060] audio0 at audioamd0: playback, capture, full duplex
[   1.0000060] audio0: slinear_be:16 -> mulaw:8 1ch 8000Hz, blk 40ms for playback
[   1.0000060] audio0: slinear_be:16 <- mulaw:8 1ch 8000Hz, blk 40ms for recording
[   1.0000060] ledma0 at sbus0 slot 4 offset 0x8400010: DMA rev 2
[   1.0000060] le0 at ledma0 slot 4 offset 0x8c00000 level 6: address xx:xx:xx:xx:xx:xx
[   1.0000060] le0: 8 receive buffers, 2 transmit buffers
[   1.0000060] dbri0 at sbus0 slot 2 offset 0x10000 level 9: rev e
[   1.0000060] scsibus0: waiting 2 seconds for devices to settle...
[   1.4529050] wskbd0 at kbd0 mux 1
[   3.4483955] sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST34573N, 6244> disk fixed
[   3.4717850] sd0: 4340 MB, 7501 cyl, 5 head, 237 sec, 512 bytes/sect x 8888924 sectors
[   3.4999825] sd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
[   4.6084475] kbd0: reset failed
[   4.9984815] dbri0: no mmcodec found
[   5.0162475] dbri0: no codec detected, aborting
[   5.0193465] root on sd0a dumps on sd0b
[   5.0784850] root file system type: ffs
[   5.0984825] kern.module.path=/stand/sparc/9.0/modules