Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2021-07-26 22:05:31
From: jramstedt
Description: NetBSD/alpha 9.2 on Digital AlphaPC 164LX
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.2 (GENERIC) #0: Wed May 12 13:15:55 UTC 2021
[     1.000000] 	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/alpha/compile/GENERIC
[     1.000000] Digital AlphaPC 164LX 666 MHz, s/n 
[     1.000000] 8192 byte page size, 1 processor.
[     1.000000] total memory = 1024 MB
[     1.000000] (2136 KB reserved for PROM, 1021 MB used by NetBSD)
[     1.000000] avail memory = 995 MB
[     1.000000] timecounter: Timecounters tick every 0.976 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0: ID 0 (primary), 21164A-2
[     1.000000] cpu0: Architecture extensions: 0x1<BWX>
[     1.000000] cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 2
[     1.000000] cia0: extended capabilities: 0x1<BWEN>
[     1.000000] cia0: using BWX for PCI config access
[     1.000000] pci0 at cia0 bus 0
[     1.000000] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.000000] bge0 at pci0 dev 6 function 0: Broadcom BCM5703 Gigabit Ethernet
[     1.000000] bge0: interrupting at eb164 irq 0
[     1.000000] bge0: HW config 00010055, 00000015, 00000000, 00000000 00000000
[     1.000000] bge0: ASIC BCM5702/5703 B0 (0x1100), Ethernet address [_MAC_XXXXXXXXXX]
[     1.000000] brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 3
[     1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] ahc0 at pci0 dev 7 function 0: Adaptec 3960D Ultra160 SCSI adapter
[     1.000000] ahc0: interrupting at eb164 irq 1
[     1.000000] ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[     1.000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[     1.000000] ahc1 at pci0 dev 7 function 1: Adaptec 3960D Ultra160 SCSI adapter
[     1.000000] ahc1: interrupting at eb164 irq 8
[     1.000000] ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[     1.000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[     1.000000] sio0 at pci0 dev 8 function 0: Intel 82378ZB System I/O (rev. 0x43)
[     1.000000] pm3fb0 at pci0 dev 9 function 0: 3D Labs GLINT Permedia 3 (rev. 0x01)
[     1.000000] autoconfiguration error: pm3fb0: no width property
[     1.000000] autoconfiguration error: pm3fb0: no height property
[     1.000000] autoconfiguration error: pm3fb0: no depth property
[     1.000000] pm3fb0: 16 MB aperture at 0x88000000
[     1.000000] pm3fb0: pm3 using 1600 x 1200 in 8 bit, stride 1600
[     1.000000] wsdisplay0 at pm3fb0 kbdmux 1: console (default, vt100 emulation)
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] cmdide0 at pci0 dev 11 function 0: CMD Technology PCI0646 (rev. 0x01)
[     1.000000] cmdide0: bus-master DMA support present
[     1.000000] cmdide0: primary channel wired to compatibility mode, channel non-independant
[     1.000000] cmdide0: primary channel interrupting at isa irq 14
[     1.000000] atabus0 at cmdide0 channel 0
[     1.000000] cmdide0: secondary channel wired to compatibility mode, channel non-independant
[     1.000000] cmdide0: secondary channel interrupting at isa irq 15
[     1.000000] atabus1 at cmdide0 channel 1
[     1.000000] isa0 at sio0
[     1.000000] lpt0 at isa0 port 0x3bc-0x3bf irq 7
[     1.000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[     1.000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
[     1.000000] pckbc0 at isa0 port 0x60-0x64
[     1.000000] pckbd0 at pckbc0 (kbd slot)
[     1.000000] pckbc0: using irq 1 for kbd slot
[     1.000000] wskbd0 at pckbd0: console keyboard, using wsdisplay0
[     1.000000] pms0 at pckbc0 (aux slot)
[     1.000000] pckbc0: using irq 12 for aux slot
[     1.000000] wsmouse0 at pms0 mux 0
[     1.000000] attimer0 at isa0 port 0x40-0x43
[     1.000000] pcppi0 at isa0 port 0x61
[     1.000000] spkr0 at pcppi0: PC Speaker
[     1.000000] wsbell at spkr0 not configured
[     1.000000] midi0 at pcppi0: PC speaker
[     1.000000] isabeep0 at pcppi0
[     1.000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[     1.000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[     1.000000] attimer0: attached to pcppi0
[     1.000000] timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0
[     1.000003] timecounter: Timecounter "PCC" frequency 666486400 Hz quality 1000
[     1.000570] scsibus0: waiting 2 seconds for devices to settle...
[     1.004506] scsibus1: waiting 2 seconds for devices to settle...
[     1.149004] atapibus0 at atabus0: 2 targets
[     1.226152] cd0 at atapibus0 drive 0: <HL-DT-STDVD-RAM GH22LP20, , 1.04> cdrom removable
[     1.236896] cd0: 32-bit data port
[     1.237870] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
[     1.237870] cd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
[     9.392644] sd0 at scsibus0 target 1 lun 0: <COMPAQ, BD07289BB8, HPB1> disk fixed
[     9.397521] sd0: 69464 MB, 78753 cyl, 2 head, 903 sec, 512 bytes/sect x 142264000 sectors
[     9.404356] sd0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers, tagged queueing
[     9.409242] sd1 at scsibus0 target 2 lun 0: <COMPAQ, BD0728A4B4, HPBC> disk fixed
[     9.415098] sd1: 69464 MB, 81782 cyl, 2 head, 869 sec, 512 bytes/sect x 142264000 sectors
[     9.419982] sd1: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers, tagged queueing
[     9.430726] sd2 at scsibus0 target 3 lun 0: <IBM-ESXS, ST336732LC    FN, B84G> disk fixed
[     9.435606] sd2: 34715 MB, 18496 cyl, 8 head, 480 sec, 512 bytes/sect x 71096640 sectors
[     9.444395] sd2: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing
[    16.129037] WARNING: 3 errors while detecting hardware; check system log.
[    16.130990] root on sd2a dumps on sd2b
[    16.145636] root file system type: ffs
[    16.146824] kern.module.path=/stand/alpha/9.2/modules