Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2021-08-26 12:06:08
From: [tj]
Description: Opteron System
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n248803-eba8e643b19: Thu Aug 19 08:47:12 UTC 2021
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 12.0.1 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-12.0.1-0-gfed41342a82f)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: AMD Opteron(tm) Processor 6380 (2500.05-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 137438953472 (131072 MB)
avail memory = 133753270272 (127557 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <031816 APIC1103>
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 2 cache groups x 8 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20210730/tbfadt-748)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
ioapic2 <Version 2.1> irqs 56-87
Launching APs: 1 25 15 14 28 16 19 18 23 10 13 24 27 22 11 21 26 31 29 20 7 8 17 2 3 5 6 9 4 12 30
Timecounter "TSC-low" frequency 1250026009 Hz quality 800
sysctl_warn_reuse: can't re-use a leaf (kern.ipc.tls.domain0.allocs)!
sysctl_warn_reuse: can't re-use a leaf (kern.ipc.tls.domain0.wakeups)!
sysctl_warn_reuse: can't re-use a leaf (kern.ipc.tls.domain0.running)!
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfb9a0-0xfb9be
smbios0: Version: 2.6
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <SMCI >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <Marvell 88SE9128 AHCI SATA controller> port 0xc800-0xc807,0xc400-0xc403,0xd800-0xd807,0xd400-0xd403,0xd000-0xd01f mem 0xdffef800-0xdffeffff irq 24 at device 0.0 on pci1
ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
ahci0: quirks=0x1000900<NOBSYRES,ALTSIG,IOMMU_BUSWIDE>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mps0: <Avago Technologies (LSI) SAS2004> port 0xb000-0xb0ff mem 0xdfe3c000-0xdfe3ffff,0xdfe40000-0xdfe7ffff irq 44 at device 0.0 on pci2
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xa800-0xa81f mem 0xdfd80000-0xdfdfffff,0xdfcfc000-0xdfcfffff irq 32 at device 0.0 on pci3
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 16 RX queues 16 TX queues
ix0: Using MSI-X interrupts with 17 vectors
ix0: allocated for 16 queues
ix0: allocated for 16 rx queues
ix0: Ethernet address: [_MAC_XXXXXXXXXX]
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: eTrack 0x000118b3 PHY FW V65535
ix0: netmap queues/slots: TX 16/2048, RX 16/2048
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xa400-0xa41f mem 0xdfc00000-0xdfc7ffff,0xdfb7c000-0xdfb7ffff irq 33 at device 0.1 on pci3
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 16 RX queues 16 TX queues
ix1: Using MSI-X interrupts with 17 vectors
ix1: allocated for 16 queues
ix1: allocated for 16 rx queues
ix1: Ethernet address: [_MAC_XXXXXXXXXX]
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: eTrack 0x000118b3 PHY FW V65535
ix1: netmap queues/slots: TX 16/2048, RX 16/2048
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
igb0: <Intel(R) PRO/1000 82576> port 0x9800-0x981f mem 0xdfae0000-0xdfafffff,0xdfac0000-0xdfadffff,0xdfa9c000-0xdfa9ffff irq 40 at device 0.0 on pci4
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 8 RX queues 8 TX queues
igb0: Using MSI-X interrupts with 9 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 82576> port 0x9400-0x941f mem 0xdfa60000-0xdfa7ffff,0xdfa40000-0xdfa5ffff,0xdfa1c000-0xdfa1ffff irq 41 at device 0.1 on pci4
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 8 RX queues 8 TX queues
igb1: Using MSI-X interrupts with 9 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0x8000-0x8007,0x7000-0x7003,0x6000-0x6007,0x5000-0x5003,0x3000-0x300f mem 0xdf9f8400-0xdf9f87ff irq 22 at device 17.0 on pci0
ahci1: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich9: <AHCI channel> at channel 1 on ahci1
ahcich10: <AHCI channel> at channel 2 on ahci1
ahcich11: <AHCI channel> at channel 3 on ahci1
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdf9f7000-0xdf9f7fff irq 16 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdf9f6000-0xdf9f6fff irq 16 at device 18.1 on pci0
usbus1 on ohci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdf9f8800-0xdf9f88ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdf9fa000-0xdf9fafff irq 18 at device 19.0 on pci0
usbus3 on ohci2
usbus3: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdf9f9000-0xdf9f9fff irq 18 at device 19.1 on pci0
usbus4 on ohci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xdf9f8c00-0xdf9f8cff irq 19 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem 0xdc000000-0xdcffffff,0xdeffc000-0xdeffffff,0xdf000000-0xdf7fffff irq 20 at device 4.0 on pci5
vgapci0: Boot video device
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xdf9fb000-0xdf9fbfff irq 18 at device 20.5 on pci0
usbus6 on ohci4
usbus6: 12Mbps Full Speed USB v1.0
pcib6: <ACPI Host-PCI bridge> on acpi0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 84 at device 2.0 on pci6
pci7: <ACPI PCI bus> on pcib7
mps1: <Avago Technologies (LSI) SAS2008> port 0xe000-0xe0ff mem 0xdbf3c000-0xdbf3ffff,0xdbf40000-0xdbf7ffff irq 56 at device 0.0 on pci7
mps1: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb800-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xcefff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen6.1: <ATI OHCI root HUB> at usbus6
ugen0.1: <ATI OHCI root HUB> at usbus0
ugen5.1: <ATI EHCI root HUB> at usbus5
ugen4.1: <ATI OHCI root HUB> at usbus4
uhub0 on usbus6
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub1 on usbus5
uhub2 on usbus4
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub3 on usbus1
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen3.1: <ATI OHCI root HUB> at usbus3
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub4 on usbus2
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub5 on usbus0
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub6 on usbus3
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
uhub2: 3 ports with 3 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6
WARNING: WITNESS option enabled, expect reduced performance.
uhub3: 3 ports with 3 removable, self powered
uhub6: 3 ports with 3 removable, self powered
uhub5: 3 ports with 3 removable, self powered
ugen6.2: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus6
ukbd0 on uhub0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus6
kbd2 at ukbd0
Root mount waiting for: CAM usbus2 usbus5
uhub1: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <CT500MX500SSD1 M3CR023> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <CT500MX500SSD1 M3CR023> ACS-3 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors)
pass2 at ahcich7 bus 0 scbus7 target 0 lun 0
pass2: <Marvell 91xx Config 1.01> Fixed Processor SCSI device
pass2: [_SERIAL_NUMBER_XXXXXXXXX]
pass2: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
intsmb0: intr SMI enabled revision 0
intsmb0: using polling mode when configured interrupt is SMI
smbus0: <System Management Bus> on intsmb0
lo0: link state changed to UP
igb0: link state changed to UP
ums0 on uhub0
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus6
ums0: 3 buttons and [Z] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
ugen0.2: <HOLDCHIP USB Gaming Keyboard> at usbus0
ukbd1 on uhub5
ukbd1: <HOLDCHIP USB Gaming Keyboard, class 0/0, rev 1.10/2.00, addr 2> on usbus0
kbd3 at ukbd1
ukbd2 on uhub5
ukbd2: <HOLDCHIP USB Gaming Keyboard, class 0/0, rev 1.10/2.00, addr 2> on usbus0
kbd4 at ukbd2
uhid0 on uhub5
uhid0: <HOLDCHIP USB Gaming Keyboard, class 0/0, rev 1.10/2.00, addr 2> on usbus0