Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2021-10-26 01:56:53
From: rin
Description: NetBSD/hpcarm 9.99.92 on HP Jornada 728
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.92 (J728) #55: Mon Oct 25 08:44:45 JST 2021
rin@latipes:/sys/arch/hpcarm/compile/J728
total memory = 65536 KB
avail memory = 59476 KB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: SA-1110 step B-5 (SA-1 V4 core)
cpu0: DC enabled IC enabled WB enabled LABT
cpu0: L1 16KB/32B 32-way (16 set) VIVT Instruction cache
cpu0: L1 8KB/32B 32-way (8 set) write-back VIVT Data cache
saip0 at mainbus0
saost0 at saip0 addr 0x90000000-0x9000001f
saost0: SA-11x0 OS Timer
sacom0 at saip0 addr 0x80050000-0x80050023 intr 17
sacom0: SA-11x0 UART3
sacom0: console
sacc0 at saip0 addr 0x40000000-0x40001fff
sacc0: SA-1111 rev 1.1
sacpcic0 at sacc0
pcmcia0 at sacpcic0
pcmcia1 at sacpcic0
sed0 at saip0
sed0: Epson SED1356
sed0: framebuffer address: 0x48200000
autoconfiguration error: sed0: WARNING: powerhook_establish is deprecated
sed0: turning off
hpcfb0 at sed0
wsdisplay0 at hpcfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
j720ssp0 at saip0 addr 0x80070000-0x800700ff
j720kbd0 at j720ssp0
hpckbd0 at j720kbd0
wskbd0 at hpckbd0 mux 1
wskbd0: connecting to wsdisplay0
j720tp0 at j720ssp0
wsmouse0 at j720tp0 mux 0
wskbd at j720tp0 not configured
j720lcd0 at j720ssp0: brightness 38, contrast 135
j720pwr0 at j720ssp0
hpcapm0 at j720pwr0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
spl_masks[0]=00020203
spl_masks[1]=00020203
spl_masks[2]=00020203
spl_masks[3]=00020203
spl_masks[4]=00020203
spl_masks[5]=00020002
spl_masks[6]=00020002
spl_masks[7]=00000000
entropy: WARNING: extracting entropy too early
clock: hz=100 stathz=64
timecounter: Timecounter "saost_count" frequency 3686400 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
sacpcic0: card present
aes: BearSSL aes_ct
chacha: Portable C ChaCha
ep0 at pcmcia0 function 0: <3Com, 3C574-TX Fast EtherLink PC Card, A, 001>
ep0: address [_MAC_XXXXXXXXXX], 64KB word-wide FIFO, 1:1 Rx:Tx split
ukphy0 at ep0 phy 0: OUI 0x00039c, model 0x0014, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sacpcic0: card present
wdc0 at pcmcia1 function 0: <TRANSCEND, TS8GCF170, >
wdc0: i/o mapped mode
atabus0 at wdc0 channel 0
wd0 at atabus0 drive 0
wd0: <TS8GCF170>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 7647 MB, 15538 cyl, 16 head, 63 sec, 512 bytes/sect x 15662304 sectors
wd0: drive supports PIO mode 4
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/hpcarm/9.99.92/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
entropy: ready