Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2021-11-24 15:45:15
From: Ken Wellsch
Description: FreeBSD 12.3-RC1/sparc64 on netra t1 105 (scsi2sd6)
---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.3-RC1 r371003 GENERIC sparc64 gcc version 4.2.1 20070831 patched [FreeBSD] real memory = 1073741824 (1024 MB) avail memory = 1028096000 (980 MB) cpu0: Sun Microsystems UltraSparc-IIi Processor (440.02 MHz CPU) random: unblocking device. random: entropy device external interface WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0. WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd0 at kbdmux0 WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0. [ath_hal] loaded WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0. WARNING: Device "openprom" is Giant locked and may be deleted before FreeBSD 14.0. nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe010000ff irq 2032,2030,2031,2021 on nexus0 pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A, 66MHz pcib0: DVMA map: 0xc0000000 to 0xc3ffffff 8192 entries pci0: <OFW PCI bus> on pcib0 pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0 pci1: <OFW PCI bus> on pcib1 ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 1.0 on pci1 pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 1.0 on pci2 pci3: <OFW PCI bus> on pcib3 auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0 ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) uart0: <16550 or compatible> addr 0x14003803f8-0x14003803ff irq 28 on ebus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> addr 0x14003602f8-0x14003602ff irq 20 on ebus0 ebus0: <ecpp> addr 0x1400340278-0x1400340287,0x140030015c-0x140030015d,0x1400700000-0x140070000f irq 34 (no driver attached) ebus0: <fdthree> addr 0x14003203f0-0x14003203f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached) eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 eeprom0: registered as a time-of-day clock, resolution 1.000000s ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) ebus0: <watchdog> addr 0x1400200000-0x140020003f irq 4 (no driver attached) ebus0: <display7seg> addr 0x1400200040 (no driver attached) ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached) ebus0: <flashprom> addr 0x1000400000-0x10005fffff (no driver attached) ebus0: <flashprom> addr 0x1000800000-0x10009fffff (no driver attached) ebus0: <i2c> addr 0x1400600000-0x1400600003 irq 40 (no driver attached) ebus0: <i2c> addr 0x1400100000-0x1400100003 irq 27 (no driver attached) ebus0: <SUNW,lom> addr 0x1400400000-0x1400400063 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1 miibus0: <MII bus> on hme0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: [_MAC_XXXXXXXXXX] hme0: Deprecated code (to be removed in FreeBSD 13): 10/100 NIC almost exclusively for sparc64 sym0: <875> port 0xc00000-0xc000ff mem 0xe0008000-0xe00080ff,0xe000a000-0xe000afff at device 2.0 on pci1 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking hme1: <Sun HME 10/100 Ethernet> mem 0xe0010000-0xe0017fff at device 3.1 on pci1 miibus1: <MII bus> on hme1 ukphy2: <Generic IEEE 802.3u media interface> PHY 0 on miibus1 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme1: Ethernet address: [_MAC_XXXXXXXXXX] hme1: Deprecated code (to be removed in FreeBSD 13): 10/100 NIC almost exclusively for sparc64 atapci0: <SiI (CMD) 646 WDMA2 controller> port 0x1000-0x1007,0x1008-0x100b,0x1010-0x1017,0x1018-0x101b,0x1020-0x102f at device 14.0 on pci3 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 cryptosoft0: <software crypto> on nexus0 nexus0: <syscons> type unknown (no driver attached) Timecounter "tick" frequency 440017906 Hz quality 1000 Event timer "tick" frequency 440017906 Hz quality 1000 Timecounters tick every 1.000 msec usb_needs_explore_all: no devclass Trying to mount root from ufs:/dev/da2a [rw]... Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM da0 at sym0 bus 0 scbus0 target 0 lun 0 da0: <codesrc SCSI2SD 6.0> Fixed Direct Access SCSI-2 device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] da0: 10.000MB/s transfers (10.000MHz, offset 15) da0: 8192MB (16777216 512 byte sectors) da1 at sym0 bus 0 scbus0 target 1 lun 0 da1: <codesrc SCSI2SD 6.0> Fixed Direct Access SCSI-2 device da1: [_SERIAL_NUMBER_XXXXXXXXXXXXX] da1: 10.000MB/s transfers (10.000MHz, offset 15) da1: 8192MB (16777216 512 byte sectors) da2 at sym0 bus 0 scbus0 target 2 lun 0 da2: <codesrc SCSI2SD 6.0> Fixed Direct Access SCSI-2 device da2: [_SERIAL_NUMBER_XXXXXXXXXXXXX] da2: 10.000MB/s transfers (10.000MHz, offset 15) da2: 8192MB (16777216 512 byte sectors) cd0 at ata3 bus 0 scbus2 target 0 lun 0 cd0: <TOSHIBA CD-ROM XM-1902B 1114> Removable CD-ROM SCSI device cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present da3 at sym0 bus 0 scbus0 target 3 lun 0 da3: <codesrc SCSI2SD 6.0> Fixed Direct Access SCSI-2 device da3: [_SERIAL_NUMBER_XXXXXXXXXXXXX] da3: 10.000MB/s transfers (10.000MHz, offset 15) da3: 5951MB (12188672 512 byte sectors) mountroot: waiting for device /dev/da2a... lo0: link state changed to UP hme0: link state changed to DOWN hme0: link state changed to UP root@netrat105:~ # dd if=/dev/da0 of=/dev/null count=1000 1000+0 records in 1000+0 records out 512000 bytes transferred in 0.553863 secs (924417 bytes/sec) root@netrat105:~ # dd if=/dev/da0 of=/dev/null count=1000 bs=1k 1000+0 records in 1000+0 records out 1024000 bytes transferred in 0.712038 secs (1438125 bytes/sec) root@netrat105:~ # dd if=/dev/da0 of=/dev/null count=1000 bs=4k 1000+0 records in 1000+0 records out 4096000 bytes transferred in 1.026412 secs (3990599 bytes/sec) root@netrat105:~ # dd if=/dev/da0 of=/dev/null count=1000 bs=64k 1000+0 records in 1000+0 records out 65536000 bytes transferred in 7.010081 secs (9348823 bytes/sec)