Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2021-12-08 22:37:01
From: root
Description: FreeBSD/amd64 on Gigabyte Technology Co., Ltd. 965P-S3
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-RELEASE-p4 #0: Tue Aug 24 07:33:27 UTC 2021 amd64
FreeBSD clang version 11.0.1 ( llvmorg-11.0.1-0-g43ff75f2c3fe)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (3000.07-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x1067a  Family=0x6  Model=0x17  Stepping=10
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8284090368 (7900 MB)
Event timer "LAPIC" quality 100
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 0
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
Timecounter "TSC-low" frequency 1500034122 Hz quality 1000
KTLS: Initialized 2 threads
random: entropy device external interface
[ath_hal] loaded
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000053 [4354] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: No AES or SHA support.
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 0xe0000000-0xefffffff,0xf5000000-0xf501ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV810 HDA Controller> mem 0xf5020000-0xf5023fff irq 17 at device 0.1 on pci1
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xd000-0xd01f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xc000-0xc01f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf8205000-0xf82053ff irq 18 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
hdac1: <Intel 82801H HDA Controller> mem 0xf8200000-0xf8203fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 UDMA133 controller> port 0x8000-0x8007,0x8400-0x8403,0x8800-0x8807,0x8c00-0x8c03,0x9000-0x900f mem 0xf8000000-0xf8001fff irq 19 at device 0.0 on pci2
ahci0: <JMicron JMB363 AHCI SATA controller> at channel -1 on atapci0
ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported
ahci0: quirks=0x1<NOFORCE>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ata2: <ATA channel> at channel 0 on atapci0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib4
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa000-0xa0ff mem 0xf7000000-0xf7003fff irq 16 at device 0.0 on pci3
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
msk0: Using defaults for TSO: 65518/35/2048
msk0: Ethernet address: xx:xx:xx:xx:xx:xx
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xc400-0xc41f irq 23 at device 29.0 on pci0
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xc800-0xc81f irq 19 at device 29.1 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xcc00-0xcc1f irq 18 at device 29.2 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf8204000-0xf82043ff irq 23 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib5
rl0: <RealTek 8139 10/100BaseTX> port 0xb000-0xb0ff mem 0xf8100000-0xf81000ff irq 20 at device 0.0 on pci4
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: xx:xx:xx:xx:xx:xx
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH8 AHCI SATA controller> port 0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc07,0xe000-0xe003,0xe400-0xe41f mem 0xf8206000-0xf82067ff irq 19 at device 31.2 on pci0
ahci1: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
ahciem0: <AHCI enclosure management bridge> on ahci1
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xd0000-0xd27ff pnpid ORM0000 on isa0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 616092206000922
device_attach: est1 attach returned 6
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen6.1: <Intel EHCI root HUB> at usbus6
uhub0 on usbus5
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub1 on usbus6
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub2 on usbus4
uhub3 on usbus3
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub4 on usbus2
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub5 on usbus0
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub6 on usbus1
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC888 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm2: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC888 (Rear Digital)> at nid 30 and 31 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM usbus3 usbus4 usbus5 usbus6
ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich7 bus 0 scbus6 target 0 lun 0
ada0: <Maxtor 6L250M0 BANC1G10> ATA-7 SATA 1.x device
ada0: Serial Number xxxxxxxx
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 239371MB (490232639 512 byte sectors)
ses0: pass0,ada0 in 'Slot 05', SATA Slot: scbus6 target 0
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:     Crypto: software
Root mount waiting for: usbus2 usbus6
uhub4: 4 ports with 4 removable, self powered
uhub1: 6 ports with 6 removable, self powered
Root mount waiting for: usbus6
ugen6.2: <SanDisk Ultra> at usbus6
umass0 on uhub1
umass0: <SanDisk Ultra, class 0/0, rev 2.10/1.00, addr 2> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:8:0: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <SanDisk Ultra 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number xxxxxxxx
da0: 40.000MB/s transfers
da0: 58680MB (120176640 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ichsmb0: <Intel 82801H (ICH8) SMBus controller> port 0x500-0x51f mem 0xf8207000-0xf82070ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled