Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2021-12-18 12:42:15
From: justin
Description: FreeBSD/amd64 on Supermicro SYS-E200-8D
---<<BOOT>>---
VERBOSE_SYSINIT: DDB not enabled, symbol lookups disabled.
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT r352386 CBSD amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
VERBOSE_SYSINIT: DDB not enabled, symbol lookups disabled.
CPU: Intel(R) Xeon(R) CPU D-1528 @ 1.90GHz (1900.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x50663  Family=0x6  Model=0x56  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 137434759168 (131068 MB)
avail memory = 133640867840 (127449 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 6 9 2 7 3 4 10 8 5 11
Timecounter "TSC" frequency 1900040756 Hz quality 1000
random: entropy device external interface
000.000017 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff811d1ac0, 0) error 19
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver>
cryptosoft0: <software crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <SUPERM SMCI--MB>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 2.2 on pci1
ACPI Warning: \134_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20190703/nsprepkg-251)
pci4: <ACPI PCI bus> on pcib4
pcib4: no PRT entry for 3.0.INTA
pcib4: no PRT entry for 3.0.INTB
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xfbc00000-0xfbdfffff,0xfbe04000-0xfbe07fff irq 11 at device 0.0 on pci4
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 6 RX queues 6 TX queues
ix0: Using MSI-X interrupts with 7 vectors
ix0: allocated for 6 queues
ix0: allocated for 6 rx queues
ix0: Ethernet address: xx:xx:xx:xx:xx:xx
ix0: netmap queues/slots: TX 6/2048, RX 6/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xfba00000-0xfbbfffff,0xfbe00000-0xfbe03fff irq 10 at device 0.1 on pci4
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 6 RX queues 6 TX queues
ix1: Using MSI-X interrupts with 7 vectors
ix1: allocated for 6 queues
ix1: allocated for 6 rx queues
ix1: Ethernet address: xx:xx:xx:xx:xx:xx
ix1: netmap queues/slots: TX 6/2048, RX 6/2048
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci1
pci5: <ACPI PCI bus> on pcib5
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xfb400000-0xfb40ffff irq 19 at device 20.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xfb414000-0xfb4143ff irq 18 at device 26.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1
pci6: <ACPI PCI bus> on pcib6
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe020-0xe03f mem 0xfb120000-0xfb13ffff,0xfb144000-0xfb147fff irq 16 at device 0.0 on pci6
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 6 RX queues 6 TX queues
igb0: Using MSI-X interrupts with 7 vectors
igb0: Ethernet address: xx:xx:xx:xx:xx:xx
igb0: netmap queues/slots: TX 6/1024, RX 6/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xfb100000-0xfb11ffff,0xfb140000-0xfb143fff irq 17 at device 0.1 on pci6
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 6 RX queues 6 TX queues
igb1: Using MSI-X interrupts with 7 vectors
igb1: Ethernet address: xx:xx:xx:xx:xx:xx
igb1: netmap queues/slots: TX 6/1024, RX 6/1024
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci1
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 18 at device 0.0 on pci8
vgapci0: Boot video device
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xfb413000-0xfb4133ff irq 18 at device 29.0 on pci1
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci1
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xfb412000-0xfb4127ff irq 16 at device 31.2 on pci1
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
kern.ipc.shmmaxpgs is now called kern.ipc.shmall!
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2 on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <INTEL SSDSC2BB120G6 G2010150> ACS-2 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
WARNING: / was not properly dismounted
lo0: link state changed to UP
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0
uhub3: MTT enabled
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub5 on uhub1
uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
uhub4: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x0557 product 0x7000> at usbus0
uhub6 on uhub0
uhub6: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 2> on usbus0
igb1: link state changed to UP
uhub6: 4 ports with 3 removable, self powered
ugen0.4: <vendor 0x0557 product 0x2419> at usbus0
ukbd0 on uhub6
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd2 at ukbd0
igb0: link state changed to UP
ioat0: <BDXDE IOAT Ch0> mem 0xfb306000-0xfb307fff irq 16 at device 0.0 on pci3
ioat0: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break>
ioat1: <BDXDE IOAT Ch1> mem 0xfb304000-0xfb305fff irq 17 at device 0.1 on pci3
ioat1: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break>
ioat2: <BDXDE IOAT Ch2> mem 0xfb302000-0xfb303fff irq 18 at device 0.2 on pci3
ioat2: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break>
ioat3: <BDXDE IOAT Ch3> mem 0xfb300000-0xfb301fff irq 19 at device 0.3 on pci3
ioat3: Capabilities: c2641<Completion_Timeout_Support,DMA_with_Multicasting_Support,Descriptor_Write_Back_Error_Support,DMA_with_DIF,PQ,Block_Fill,Page_Break>
ums0 on uhub6
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0