Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2022-01-18 04:33:52
From: LambdaCalculus37
Description: OpenBSD 7.0/amd64 running under VirtualBox 6.1.30
OpenBSD 7.0 (GENERIC) #3: Wed Dec 15 13:13:05 MST 2021
real mem = 8573091840 (8175MB)
avail mem = 8297328640 (7912MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz, 2782.87 MHz, 06-4e-03
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 1000MHz
cpu0: mwait min=64, max=64
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpibat0 at acpi0: BAT0 model "1" serial 0 type VBOX oem "innotek"
acpiac0 at acpi0: AC unit online
acpicpu0 at acpi0: C1(@1 halt!)
acpivideo0 at acpi0: GFX0
cpu0: using VERW MDS workaround (except on vmm entry)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
vga1 at pci0 dev 2 function 0 "VMware SVGA II" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 1 int 19, address xx:xx:xx:xx:xx:xx
"InnoTek Guest Service" rev 0x00 at pci0 dev 4 function 0 not configured
auich0 at pci0 dev 5 function 0 "Intel 82801AA AC97" rev 0x01: apic 1 int 21, ICH
ac97: codec id 0x83847600 (SigmaTel STAC9700)
audio0 at auich0
ohci0 at pci0 dev 6 function 0 "Apple Intrepid USB" rev 0x00: apic 1 int 22, version 1.0
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 1 int 23
iic0 at piixpm0
ehci0 at pci0 dev 11 function 0 "Intel 82801FB USB" rev 0x00: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ahci0 at pci0 dev 13 function 0 "Intel 82801HBM AHCI" rev 0x02: apic 1 int 21, AHCI 1.1
ahci0: device on port 0 didn't come ready, TFD: 0x171<ERR>
ahci0: port 0: 3.0Gb/s
ahci0: device on port 1 didn't come ready, TFD: 0x131<ERR>
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, VBOX HARDDISK, 1.0> t10.ATA_VBOX_HARDDISK_VB742f1a4f-9e531c93_
sd0: 40960MB, 512 bytes/sector, 83886080 sectors
cd0 at scsibus1 targ 1 lun 0: <VBOX, CD-ROM, 1.0> removable
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
dt: 445 probes
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (17c8a17ff3ac11b9.a) swap on sd0b dump on sd0b