Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2022-02-17 21:06:20
From: SteveG
Description: Globalscale Technologies Sheeva64
OpenBSD 7.0 (GENERIC.MP) #1332: Thu Sep 30 16:53:51 MDT 2021
    xxx@xxx.xxx:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem  = 1046351872 (997MB)
avail mem = 981729280 (936MB)
random: good seed from bootblocks
mainbus0 at root: gti sheeva64 development board
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 256KB 64b/line 16-way L2 cache
cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 256KB 64b/line 16-way L2 cache
cpu1: CRC32,SHA2,SHA1,AES+PMULL,ASID16
efi0 at mainbus0: UEFI 2.0.5
efi0: Das U-boot rev 0x0
apm0 at mainbus0
agtimer0 at mainbus0: 12500 kHz
"pmu" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
simplebus1 at simplebus0: "internal-regs"
syscon0 at simplebus1: "system-controller"
syscon1 at simplebus1: "avs"
mvclock0 at simplebus1
mvclock1 at simplebus1
mvclock2 at simplebus1
mvpinctrl0 at simplebus1
syscon2 at simplebus1: "syscon"
mvpinctrl1 at simplebus1
syscon3 at simplebus1: "system-controller"
syscon4 at simplebus1: "system-controller"
agintc0 at simplebus1 shift 4:3 nirq 224 nredist 2 ipi: 0, 1: "interrupt-controller"
mvdog0 at simplebus1
mvspi0 at simplebus1
mviic0 at simplebus1
iic0 at mviic0
pcxrtc0 at iic0 addr 0x51: battery ok
mvuart0 at simplebus1
"phy" at simplebus1 not configured
mvneta0 at simplebus1
mvneta0: Ethernet address xx:xx:xx:xx:xx:xx
mvmdio0 at simplebus1: "mdio"
mvneta1 at simplebus1
mvneta1: Ethernet address xx:xx:xx:xx:xx:xx
xhci0 at simplebus1, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
"phy" at simplebus1 not configured
"usb" at simplebus1 not configured
"phy" at simplebus1 not configured
"xor" at simplebus1 not configured
"crypto" at simplebus1 not configured
"mailbox" at simplebus1 not configured
sdhc0 at simplebus1
sdhc0: SDHC 3.0, 400 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, ddr52, dma
sdhc1 at simplebus1
sdhc1: SDHC 3.0, 400 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
eephy0 at mvneta0 phy 0: 88E1512 10/100/1000 PHY, rev. 1
eephy1 at mvneta1 phy 1: 88E1512 10/100/1000 PHY, rev. 1
"usb3-vbus" at mainbus0 not configured
"usb2-vbus" at mainbus0 not configured
"wifi-vbus" at mainbus0 not configured
"regulator" at mainbus0 not configured
"usb3-phy" at mainbus0 not configured
"usb2-phy" at mainbus0 not configured
"gpio-leds" at mainbus0 not configured
dt: 445 probes
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, SEM04G, 0000> removable
sd0: 3776MB, 512 bytes/sector, 7733248 sectors
scsibus1 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, USD00, 0020> removable
sd1: 15096MB, 512 bytes/sector, 30916608 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (8a20e6a9849b3383.a) swap on sd1b dump on sd1b
umass0 at uhub0 port 1 configuration 1 interface 0 "Jmicron External Disk 3.0" rev 3.00/2.04 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0: <USB, , 0204> serial.152d1576987654321010
sd2: 114473MB, 512 bytes/sector, 234441648 sectors