Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2022-06-19 14:17:39
From: freakinbox
Description: FreeBSD/amd64 on
Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 done All buffers synced. Uptime: 9m30s ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(efifb): resolution 800x600 CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (3093.10-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16528089088 (15762 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL DQ67SW > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 2 1 3 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xbcc17d98-0xbcc17db6 smbios0: Version: 2.6, BCD Revision: 2.6 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <INTEL DQ67SW> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device pci0: <simple comms> at device 22.0 (no driver attached) atapci0: <Intel ATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0ff irq 18 at device 22.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 uart2: <Intel AMT - KT Controller> port 0xf0e0-0xf0e7 mem 0xfe729000-0xfe729fff irq 17 at device 22.3 on pci0 uart2: Using 1 MSI message em0: <Intel(R) 82579LM> port 0xf080-0xf09f mem 0xfe700000-0xfe71ffff,0xfe728000-0xfe728fff irq 20 at device 25.0 on pci0 em0: EEPROM V0.13-4 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfe727000-0xfe7273ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 hdac0: <Intel Cougar Point HDA Controller> mem 0xfe720000-0xfe723fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168 Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfe604000-0xfe604fff,0xfe600000-0xfe603fff irq 16 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe500000-0xfe501fff irq 18 at device 0.0 on pci3 xhci0: 32 bytes context size, 32-bit DMA usbus1 on xhci0 usbus1: 5.0Gbps Super Speed USB v3.0 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfe726000-0xfe7263ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <serial bus, FireWire> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe725000-0xfe7257ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcefff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1546486612 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen1.1: <(0x1033) XHCI root HUB> at usbus1 ugen0.1: <Intel EHCI root HUB> at usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2 hdacc0: <Realtek ALC888 HDA CODEC> at cad 2 on hdac0 hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC888 (Rear Analog)> at nid 20 and 24,26 on hdaa0 pcm1: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa0 pcm2: <Realtek ALC888 (Onboard Digital)> at nid 30 on hdaa0 pcm3: <Realtek ALC888 (Onboard Analog Speaker)> at nid 23 on hdaa0 hdacc1: <Intel Cougar Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Cougar Point Audio Function Group> at nid 1 on hdacc1 pcm4: <Intel Cougar Point (HDMI/DP 8ch)> at nid 6 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... uhub0 on usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub1 on usbus1 uhub1: <(0x1033) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub2 on usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: 4 ports with 4 removable, self powered Root mount waiting for: CAM usbus0 usbus2 uhub2: 3 ports with 3 removable, self powered uhub0: 3 ports with 3 removable, self powered ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub4 on uhub2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 Root mount waiting for: CAM usbus0 usbus2 ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich1 bus 0 scbus2 target 0 lun 0 ada0: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus2 target 0 ses0: pass1 in 'Slot 02', SATA Slot: scbus3 target 0 cd0 at ahcich2 bus 0 scbus3 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GH41N MN01> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen0.3: <Logitech USB Optical Mouse> at usbus0 ugen0.4: <vendor 0x0461 Wired USB Keyboard> at usbus0 ukbd0 on uhub3 ukbd0: <vendor 0x0461 Wired USB Keyboard, class 0/0, rev 2.00/1.80, addr 4> on usbus0 kbd2 at ukbd0 ichsmb0: <Intel Cougar Point SMBus controller> port 0xf040-0xf05f mem 0xfe724000-0xfe7240ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 lo0: link state changed to UP em0: link state changed to UP re0: link state changed to DOWN ums0 on uhub3 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0