Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2022-06-21 19:35:43
From: tingo
Description: FreeBSD/amd64 on Asus F2A55-M
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-RELEASE-p5 GENERIC amd64
FreeBSD clang version 10.0.1 (xxx@xxx.xxx:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(efifb): resolution 1024x768
CPU: AMD A8-5600K APU with Radeon(tm) HD Graphics    (3618.08-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x610f01  Family=0x15  Model=0x10  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
  Structured Extended Features=0x8<BMI1>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 32515743744 (31009 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
Launching APs: 2 1 3
Timecounter "TSC-low" frequency 1809038106 Hz quality 1000
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
000.000019 [4337] netmap_init               netmap: loaded module
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff811848b0, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 17 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9902) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 18 at device 1.1 on pci0
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4c000-0xfeb4c7ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD FCH USB Controller> mem 0xfeb4b000-0xfeb4bfff irq 18 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb4a000-0xfeb4a0ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: <AMD FCH USB Controller> mem 0xfeb49000-0xfeb49fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb48000-0xfeb480ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
hdac0: <AMD Hudson-2 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfea00000-0xfea07fff irq 18 at device 0.0 on pci4
xhci0: 32 bytes context size, 32-bit DMA
usbus4 on xhci0
usbus4: 5.0Gbps Super Speed USB v3.0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC887 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0
pcm3: <Realtek ALC887 (Onboard Digital)> at nid 17 on hdaa0
hdac1: <ATI (0x9902) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 18 at device 1.1 on pci0
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
ugen3.1: <AMD EHCI root HUB> at usbus3
ugen4.1: <0x1b21 XHCI root HUB> at usbus4
uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
ugen2.1: <AMD OHCI root HUB> at usbus2
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Trying to mount root from ufs:/dev/ada0p7 [rw]...
ugen0.1: <AMD OHCI root HUB> at usbus0
Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA HDWD110 MS2OA8J0> ATA8-ACS SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <ST16000NM001G-2KK103 SN04> ACS-4 ATA SATA 3.x device
ada1: Serial Number xxxxxxxx
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 15259648MB (31251759104 512 byte sectors)
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <ST16000NM001G-2KK103 SN04> ACS-4 ATA SATA 3.x device
ada2: Serial Number xxxxxxxx
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 15259648MB (31251759104 512 byte sectors)
ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
ada3: <ST16000NM001G-2KK103 SN03> ACS-4 ATA SATA 3.x device
ada3: Serial Number xxxxxxxx
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 15259648MB (31251759104 512 byte sectors)
ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
ada4: <ST16000NM001G-2KK103 SN04> ACS-4 ATA SATA 3.x device
ada4: Serial Number xxxxxxxx
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 15259648MB (31251759104 512 byte sectors)
uhub4: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1 usbus3
uhub3: 5 ports with 5 removable, self powered
uhub0: 5 ports with 5 removable, self powered
mountroot: waiting for device /dev/ada0p7...
WARNING: / was not properly dismounted
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.2: <CHESEN PS2 to USB Converter> at usbus0
ukbd0 on uhub4
ukbd0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on usbus0
kbd2 at ukbd0
[drm] radeon kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (ARUBA 0x1002:0x9904 0x1043:0x8526 0x00).
[drm:radeon_device_init] Unable to find PCI I/O BAR
[drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO
ATOM BIOS: 113
drmn0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
drmn0: GTT: 1024M 0x0000000030000000 - 0x000000006FFFFFFF
Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; 
[drm] Detected VRAM RAM=768M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 16339894 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[drm] radeon: 768M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading ARUBA Microcode
radeon/ARUBA_pfp.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: radeon/ARUBA_pfp.bin
drmn0: successfully loaded firmware image with mapped name: radeon_ARUBA_pfp_bin
radeon/ARUBA_me.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: radeon/ARUBA_me.bin
drmn0: successfully loaded firmware image with mapped name: radeon_ARUBA_me_bin
radeon/ARUBA_rlc.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: radeon/ARUBA_rlc.bin
drmn0: successfully loaded firmware image with mapped name: radeon_ARUBA_rlc_bin
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
radeon/TAHITI_uvd.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: radeon/TAHITI_uvd.bin
drmn0: successfully loaded firmware image with mapped name: radeon_TAHITI_uvd_bin
radeon/TAHITI_vce.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: radeon/TAHITI_vce.bin
drmn0: successfully loaded firmware image with mapped name: radeon_TAHITI_vce_bin
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
drmn0: WB enabled
drmn0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0x0xfffff8001da68c00
drmn0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x0xfffff800c0075a18
drmn0: fence driver on ring 6 use gpu addr 0x0000000030000c18 and cpu addr 0x0xfffff8001da68c18
drmn0: fence driver on ring 7 use gpu addr 0x0000000030000c1c and cpu addr 0x0xfffff8001da68c1c
drmn0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0x0xfffff8001da68c04
drmn0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0x0xfffff8001da68c08
drmn0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0x0xfffff8001da68c0c
drmn0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0x0xfffff8001da68c10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
drmn0: radeon: MSI limited to 32-bit
drmn0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm:r600_dma_ring_test] radeon: ring 3 test failed (0xCAFEDEAD)
drmn0: disabling GPU acceleration
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector VGA-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.VGA-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DVI-D-1
[drm]   - kern.vt.fb.default_mode
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   HDMI-A-1
[drm]   HPD1
[drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   VGA-1
[drm]   HPD2
[drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_UNIPHY2
[drm]     CRT1: NUTMEG
[drm] Connector 2:
[drm]   DVI-D-1
[drm]   HPD3
[drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
[drm] fb mappable at 0xC03D7000
[drm] vram apper at 0xC0000000
[drm] size 9216000
[drm] fb depth is 24
[drm]    pitch is 7680
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1200 width=1920 depth=32
cmsize=16 size=9216000
pbase=0xc03d7000 vbase=0xfffff800c03d7000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
hdac1: <ATI (0x9902) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 18 at device 1.1 on pci0
hdac1: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac1 attach returned 6
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
device_attach: acpi_wmi0 attach returned 6
lo0: link state changed to UP
re0: link state changed to DOWN
ums0 on uhub4
ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=1
re0: link state changed to UP