Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2022-08-16 07:20:45
From: marc
Description: FreeBSD/amd64 on HP ProLiant DL360 G7
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE releng/13.1-n250148-fc952ac2212 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz (2266.83-MHz K8-class CPU) Origin="GenuineIntel" Id=0x106a5 Family=0x6 Model=0x1a Stepping=5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8272445440 (7889 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20201113/tbfadt-850) ioapic1 <Version 2.0> irqs 24-47 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 5 4 7 3 2 6 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf4f40-0xf4f5e smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: No AES or SHA support. acpi0: <HP ProLiant> acpi0: Power Button (fixed) acpi0: _OSC failed: AE_BUFFER_OVERFLOW cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 apei0: <ACPI Platform Error Interface> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ciss0: <HP Smart Array P410i> port 0x4000-0x40ff mem 0xfbe00000-0xfbffffff,0xfbdf0000-0xfbdf0fff irq 28 at device 0.0 on pci1 ciss0: PERFORMANT Transport pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci7: <ACPI PCI bus> on pcib7 bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf4000000-0xf5ffffff irq 30 at device 0.0 on pci7 miibus0: <MII bus> on bce0 brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Using defaults for TSO: 65518/35/2048 bce0: Ethernet address: [_MAC_XXXXXXXXXX] bce0: ASIC (0x57092003); bce0: link state changed to DOWN Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) Coal (RX:6,6,18,18; TX:20,20,80,80) bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf2000000-0xf3ffffff irq 37 at device 0.1 on pci7 miibus1: <MII bus> on bce1 brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Using defaults for TSO: 65518/35/2048 bce1: Ethernet address: [_MAC_XXXXXXXXXX] bce1: ASIC (0x57092003); bce1: link state changed to DOWN Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci8: <ACPI PCI bus> on pcib8 bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf8000000-0xf9ffffff irq 31 at device 0.0 on pci8 miibus2: <MII bus> on bce2 brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce2: Using defaults for TSO: 65518/35/2048 bce2: Ethernet address: [_MAC_XXXXXXXXXX] bce2: ASIC (0x57092003); bce2: link state changed to DOWN Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) Coal (RX:6,6,18,18; TX:20,20,80,80) bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf6000000-0xf7ffffff irq 39 at device 0.1 on pci8 miibus3: <MII bus> on bce3 brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce3: Using defaults for TSO: 65518/35/2048 bce3: Ethernet address: [_MAC_XXXXXXXXXX] bce3: ASIC (0x57092003); bce3: link state changed to DOWN Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci10: <ACPI PCI bus> on pcib10 pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci11: <ACPI PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci12: <ACPI PCI bus> on pcib12 uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 17 at device 0.4 on pci12 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq 20 at device 29.0 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq 23 at device 29.1 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq 22 at device 29.2 on pci0 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq 23 at device 29.3 on pci0 usbus4 on uhci4 usbus4: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf1bf0000-0xf1bf03ff irq 20 at device 29.7 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci0 usbus5: 480Mbps High Speed USB v2.0 pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci13: <ACPI PCI bus> on pcib13 vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe8000000-0xefffffff,0xf1cf0000-0xf1cfffff irq 23 at device 3.0 on pci13 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH10 SATA300 controller> port 0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0x10af,0x10b0-0x10bf irq 17 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_syscontainer0: <System Container> port 0x2e-0x2f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x31f on acpi0 uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0 uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est1 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est2 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est3 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est4 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est5 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est6 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est7 attach returned 6 Timecounter "TSC-low" frequency 1133373508 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen3.1: <Intel UHCI root HUB> at usbus3 ugen2.1: <Intel UHCI root HUB> at usbus2 ugen4.1: <Intel UHCI root HUB> at usbus4 uhub0 on usbus2 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <HP UHCI root HUB> at usbus0 uhub1 on usbus3 ugen5.1: <Intel EHCI root HUB> at usbus5 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub2 on usbus5 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub3 on usbus4 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 Trying to mount root from zfs:zroot/ROOT/default []... uhub4 on usbus1 uhub5 on usbus0 uhub5: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub1: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: CAM usbus5 ada0 at ata2 bus 0 scbus1 target 0 lun 0 ada0: <KINGSTON SA400S37240G 03200000> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 512bytes) ada0: 228936MB (468862128 512 byte sectors) Root mount waiting for: usbus5 uhub2: 8 ports with 8 removable, self powered Root mount waiting for: usbus5 ugen4.2: <IBM Model M> at usbus4 ukbd0 on uhub3 ukbd0: <IBM Model M, class 0/0, rev 1.01/1.00, addr 2> on usbus4 kbd2 at ukbd0 lo0: link state changed to UP