Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2022-10-02 02:56:09
From: Pawlicker
Description: Sun Ultra 45 (single CPU), OpenBSD 7.1, XVR-100
console is keyboard/display Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2022 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 7.1 (GENERIC) #1227: Mon Apr 11 21:51:56 MDT 2022 xxx@xxx.xxx:/usr/src/sys/arch/sparc64/compile/GENERIC real mem = 4294967296 (4096MB) avail mem = 4201660416 (4007MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: Sun Ultra 45 Workstation cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) "memory-controller" at mainbus0 not configured pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12 pyro0: dvma map c0000000-ffffffff pci0 at pyro0 ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa pci1 at ppb0 bus 3 ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa pci2 at ppb1 bus 4 ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00 pci3 at ppb2 bus 5 ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 auacer0 at pci3 dev 29 function 0 "Acer Labs M5455 Audio" rev 0x21: ivec 0x785 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auacer0 alipm0 at pci3 dev 30 function 1 "Acer Labs M7101 Power" rev 0x00: can't map i/o space pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x784 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) usb1 at ohci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa pci4 at ppb3 bus 6 ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3 pci5 at ppb4 bus 7 bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x796, address xx:xx:xx:xx:xx:xx brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x797, address xx:xx:xx:xx:xx:xx brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: msi pci6 at ppb5 bus 8 ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: msi pci7 at ppb6 bus 9 ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa pci8 at ppb7 bus 10 ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 pci9 at ppb8 bus 11 mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi mpi0: SAS1064, firmware xxx.xxx.xxx.xxx scsibus2 at mpi0: 63 targets sd0 at scsibus2 targ 0 lun 0: <ATA, TOSHIBA DT01ACA1, A750> naa.5000039fe7ee7637 sd0: 953869MB, 512 bytes/sector, 1953525168 sectors ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 pci10 at ppb9 bus 12 radeondrm0 at pci10 dev 2 function 0 "ATI Radeon VE" rev 0x00 drm0 at radeondrm0 radeondrm0: ivec 0x790 pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255 pyro1: dvma map c0000000-ffffffff pci11 at pyro1 ebus0 at mainbus0 "flashprom" at ebus0 addr 0-1fffff not configured rtc0 at ebus0 addr 100000-10000f: bq4802 com0 at ebus0 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo com1 at ebus0 addr 0-7 ivec 0x7c8: ns16550a, 16 byte fifo "env-monitor" at ebus0 addr 0-41 not configured pcfiic0 at ebus0 addr 80-81 ivec 0x7c1 iic0 at pcfiic0 "pca9556" at iic0 addr 0x18 not configured lmtemp0 at iic0 addr 0x2b: lm76 lmtemp1 at iic0 addr 0x48: lm76, fails to respond lmtemp2 at iic0 addr 0x4f: lm76 "adt7462" at iic0 addr 0x58 not configured power0 at ebus0 addr e0-e1 ivec 0x7c3 "i2c" at mainbus0 not configured "i2c" at mainbus0 not configured "ppm" at mainbus0 not configured uhub4 at uhub0 port 7 configuration 1 interface 0 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr 2 uhidev0 at uhub1 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard" rev 1.10/3.52 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard uhidev1 at uhub1 port 2 configuration 1 interface 0 "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets bootpath: /pci@1e,600000/pci@0,0/pci@9,0/pci@0,0/scsi@1,0/disk@0,0 root on sd0a (6ff74c81241037bf.a) swap on sd0b dump on sd0b radeondrm0: RV100 [drm] *ERROR* radeon: ring test failed (scratch(0x15E4)=0xCAFEDEAD) [drm] *ERROR* radeon: cp isn't working (-22). drm:pid0:r100_startup *ERROR* failed initializing CP (-22). drm:pid0:r100_init *ERROR* Disabling GPU acceleration radeondrm0: 1280x1024, 8bpp wsdisplay0 at radeondrm0 mux 1: console (std, sun emulation), using wskbd0 Bogus possible_clones: [ENCODER:45:TMDS-45] possible_clones=0x6 (full encoder mask=0x7) Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x5 (full encoder mask=0x7) Bogus possible_clones: [ENCODER:48:DAC-48] possible_clones=0x3 (full encoder mask=0x7)