Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2022-10-10 21:12:29
From: vezhlys
Description: ICOP VEX2-6427-5C4NE (Vortex86EX2)
OpenBSD 7.2-current (GENERIC.MP) #416: Sat Oct 8 17:20:01 MDT 2022 xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 20<config_unit> real mem = 1073094656 (1023MB) avail mem = 1036537856 (988MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 06/23/99, BIOS32 rev. 0 @ 0xff046, SMBIOS rev. 2.7 @ 0x3ffe1420 (6 entries) bios0: vendor coreboot version "4.0-5660-g9bef30331" date 06/29/2020 bios0: DMP Vortex86EX2 acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1370/224 (12 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0x17f3 product 0x6013 pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0x8000 0xed000/0x3000! cpu0 at mainbus0: (uniprocessor) cpu0: Vortex86EX2 (686-class) 601 MHz, 06-00-02 cpu0: FPU,PSE,TSC,MSR,PAE,CX8,APIC,SEP,PGE,CMOV,PAT,MMX,FXSR,SSE,SSE2,SSE3,SSSE3,NXE pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 vendor "RDC", unknown product 0x6026 rev 0x00 ppb0 at pci0 dev 4 function 0 "RDC R1031 PCIe" rev 0x03: irq 10 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x02 pci2 at ppb1 bus 2 vga1 at pci2 dev 0 function 0 "ASPEED Technology AST2000" rev 0x21 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb2 at pci0 dev 5 function 0 "RDC R1031 PCIe" rev 0x03: irq 11 pci3 at ppb2 bus 3 ahci0 at pci3 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x02: irq 11, AHCI 1.2 ahci0: port 0: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SD6SA1M0, X231> naa.5001b444a6880276 sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin vendor "RDC", unknown product 0x1930 (class undefined unknown subclass 0xff, rev 0x00) at pci0 dev 6 function 0 not configured pcib0 at pci0 dev 7 function 0 vendor "RDC", unknown product 0x6013 rev 0x00 pcib1 at pci0 dev 7 function 1 vendor "RDC", unknown product 0x6013 rev 0x00 vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: irq 6, address xx:xx:xx:xx:xx:xx ukphy0 at vte0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x000bb4, model 0x0006 ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x15: irq 7, version 1.0, legacy support ehci0 at pci0 dev 10 function 1 "RDC R6061 USB2" rev 0x09: irq 7 ehci0: halt timeout usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "RDC EHCI root hub" rev 2.00/1.00 addr 1 vendor "RDC", unknown product 0x1061 (class serial bus subclass USB, rev 0x00) at pci0 dev 11 function 0 not configured pciide0 at pci0 dev 12 function 0 "RDC R1012 IDE" rev 0x05: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using irq 15 for native-PCI interrupt pciide0: channel 0 disabled (no drives) pciide0: channel 1 ignored (disabled) isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 isa at pcib1 not configured usb1 at ohci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "RDC OHCI root hub" rev 1.00/1.00 addr 1 nvram: invalid checksum uhub2 at uhub0 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/60.70 addr 2 umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB Storage" rev 2.10/0.09 addr 3 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <Generic, MassStorageClass, 0009> removable sd1: 29664MB, 512 bytes/sector, 60751872 sectors sd2 at scsibus2 targ 1 lun 1: <Generic, MassStorageClass, 0009> removable sd3 at scsibus2 targ 1 lun 2: <Generic, MassStorageClass, 0009> removable uhidev0 at uhub2 port 3 configuration 1 interface 0 "CASUE CASUE USB Keyboard" rev 1.10/0.01 addr 4 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub2 port 3 configuration 1 interface 1 "CASUE CASUE USB Keyboard" rev 1.10/0.01 addr 4 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 ucc0 at uhidev1 reportid 2: 18 usages, 13 keys, enum wskbd2 at ucc0 mux 1 wskbd2: connecting to wsdisplay0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd1a (d8c2f4a9070f8fd3.a) swap on sd1b dump on sd1b clock: unknown CMOS layout