Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2022-10-22 22:57:47
From: Fred
Description: Vortex86MX 934 Mhz 512Mb RAM - OpenBSD 7.2
OpenBSD 7.2 (GENERIC) #381: Tue Sep 27 12:41:39 MDT 2022
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
real mem = 536363008 (511MB)
avail mem = 509689856 (486MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/21/11, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2fe0/240 (13 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x17f3 product 0x6036
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
cpu0 at mainbus0: (uniprocessor)
cpu0: Vortex86 SoC (586-class) 934 MHz, 05-08-06
cpu0: FPU,TSC,CX8,MMX
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "RDC R6021 Host" rev 0x02
pcib0 at pci0 dev 7 function 0 "RDC R6036 ISA" rev 0x00
vte0 at pci0 dev 8 function 0 "RDC R6040 Ethernet" rev 0x00: irq 3, address [_MAC_XXXXXXXXXX]
rdcphy0 at vte0 phy 1: R6040 10/100 PHY, rev. 1
ohci0 at pci0 dev 10 function 0 "RDC R6060 USB" rev 0x12: irq 5, version 1.0, legacy support
ehci0 at pci0 dev 10 function 1 "RDC R6061 USB2" rev 0x03: irq 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 11 function 0 "RDC R6060 USB" rev 0x12: irq 9, version 1.0, legacy support
ehci1 at pci0 dev 11 function 1 "RDC R6061 USB2" rev 0x03: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "RDC EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 12 function 0 "Intel 82801EB/ER IDE" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 14 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <USD RDC SD-IDE HOST CONTROLLER>
wd0: 1-sector PIO, LBA, 30720MB, 62914560 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
vga1 at pci0 dev 13 function 0 "RDC M2010 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 14 function 0 "RDC R3010 HDA" rev 0x01: irq 11
azalia0: codecs: Realtek ALC262
audio0 at azalia0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "RDC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "RDC OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub2 port 1 configuration 1 interface 0 " USB Keyboard" rev 1.10/4.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 " USB Keyboard" rev 1.10/4.03 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 2: 4 usages, 4 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhidev2 at uhub3 port 1 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (ffe91954c6152ee8.a) swap on wd0b dump on wd0b