Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2022-12-15 04:33:35
From: JE3KMZ
Description: FreeBSD/amd64 on NEC Express5800/GT110b [N8100-1592Y]
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p3 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(vga): resolution 640x480 CPU: Intel(R) Celeron(R) CPU G1101 @ 2.27GHz (2261.10-MHz K8-class CPU) Origin="GenuineIntel" Id=0x20655 Family=0x6 Model=0x25 Stepping=5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x82e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4028407808 (3841 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf6df0-0xf6e0e smbios0: Version: 2.6 aesni0: No AES or SHA support. acpi0: <PTLTD XSDT> acpi0: Power Button (fixed) acpi0: _OSC failed: AE_BUFFER_OVERFLOW cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 tpm0: <Trusted Platform Module> iomem 0xfed40000-0xfed44fff on acpi0 tpm: WEC WPCT200 rev 0x46 WARNING: Device "tpm" is Giant locked and may be deleted before FreeBSD 14.0. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xde500000-0xde5003ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib3 3ware device driver for 9000 series storage controllers, version:[_IP_XXXXXX] twa0: <3ware 9000 series Storage Controller> port 0x2000-0x20ff mem 0xdc000000-0xddffffff,0xde100000-0xde100fff irq 16 at device 0.0 on pci2 twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X[_IP_XXXXXX], BIOS BE9X[_IP_XXXXXX] twa0: Deprecated code (to be removed in FreeBSD 14): twa(4) removed pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci3: <ACPI PCI bus> on pcib4 em0: <Intel(R) Gigabit CT 82574L> port 0x3000-0x301f mem 0xde200000-0xde21ffff,0xde220000-0xde223fff irq 19 at device 0.0 on pci3 em0: EEPROM V1.8-0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 2/1024, RX 2/1024 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xde501000-0xde5013ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib5 re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0x4000-0x40ff mem 0xde040000-0xde0400ff irq 16 at device 0.0 on pci4 re0: Chip rev. 0x10000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 vgapci0: <VGA-compatible display> port 0x4400-0x447f mem 0xd8000000-0xdbffffff,0xde000000-0xde03ffff at device 3.0 on pci4 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel Ibex Peak SATA300 controller> port 0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1810-0x181f,0x1800-0x180f irq 19 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 ichsmb0: <Intel PCH SMBus controller> port 0x1840-0x185f mem 0xde502000-0xde5020ff irq 18 at device 31.3 on pci0 atapci1: <Intel Ibex Peak SATA300 controller> port 0x1888-0x188f,0x183c-0x183f,0x1880-0x1887,0x1838-0x183b,0x1870-0x187f,0x1860-0x186f irq 18 at device 31.5 on pci0 ata4: <ATA channel> at channel 0 on atapci1 ata5: <ATA channel> at channel 1 on atapci1 acpi_syscontainer0: <System Container> on acpi0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1130482962 Hz quality 1000 Timecounters tick every 1.000 msec smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 ugen0.1: <Intel EHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0 on usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub1 on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Trying to mount root from ufs:/dev/da0p3 [rw]... uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 CAM usbus1 ugen1.2: <vendor 0x8087 product 0x0020> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen0.2: <vendor 0x8087 product 0x0020> at usbus0 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 Root mount waiting for: usbus0 CAM usbus1 uhub3: 6 ports with 6 removable, self powered uhub2: 8 ports with 8 removable, self powered ugen1.3: <vendor 0x0557 product 0x8021> at usbus1 uhub4 on uhub2 uhub4: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 3> on usbus1 Root mount waiting for: CAM usbus1 uhub4: 4 ports with 4 removable, self powered da0 at twa0 bus 0 scbus0 target 0 lun 0 da0: <AMCC 9650SE-2LP DISK 4.10> Fixed Direct Access SPC-3 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 100.000MB/s transfers da0: 76283MB (156227584 512 byte sectors) cd0 at ata2 bus 0 scbus1 target 0 lun 0 cd0: <HL-DT-ST DVD-ROM DH50N A100> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ugen1.4: <vendor 0x099a USB Keyboard> at usbus1 ukbd0 on uhub4 ukbd0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus1 kbd2 at ukbd0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP em0: link state changed to UP uhid0 on uhub4 uhid0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus1 ums0 on uhub4 ums0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus1 ums0: 5 buttons and [XYZ] coordinates ID=0 ums1 on uhub4 ums1: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus1