Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2023-01-01 13:32:59
From: johnny-mnemonic
Description: OpenBSD/sgi 7.0 MP on SGI Octane with octeon fs, see github.com/the-machine-hall/openbsd-src/releases/tag/openbsd.70.sgi
>> printenv
AutoLoad=No
console=d1
diskless=1
dbaud=9600
volume=80
sgilogo=y
autopower=y
netaddr=xxx.xxx.xxx.xxx
eaddr=xx:xx:xx:xx:xx:xx
boottune=1
SystemPartition=bootp()
OSLoadPartition=bootp()
fastfan=0
ConsoleOut=serial(0)
ConsoleIn=serial(0)
cpufreq=300
OSLoadFilename=/bsd
OSLoader=sash
>> boot
Setting $netaddr to xxx.xxx.xxx.xxx (from server )
Obtaining /sash from server
7250816+730016 entry: 0xa800000020020000
ARCS64 Firmware
Found SGI-IP30, setting up.
Initial setup done, switching console.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.0 (GENERIC-IP30.MP) #2: Wed Nov 23 21:55:38 CET 2022
[_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/sys/arch/sgi/compile/GENERIC-IP30.MP
real mem = 2147483648 (2048MB)
rsvd mem = 1064960 (2MB)
avail mem = 2119368704 (2021MB)
warning: no entropy supplied by boot loader
random: boothowto does not indicate good seed
mainbus0 at root: Octane
cpu0 at mainbus0: MIPS R12000 CPU rev 2.3 300 MHz, R10000 FPU rev 0.0
cpu0: cache L1-I 32KB D 32KB 2 way, L2 2048KB 2 way
cpu1 at mainbus0: MIPS R12000 CPU rev 2.3 300 MHz, R10000 FPU rev 0.0
cpu1: cache L1-I 32KB D 32KB 2 way, L2 2048KB 2 way
clock0 at mainbus0: int 5
xbow0 at mainbus0: XBow revision 4
xheart0 at xbow0 widget 8: Heart revision 4
onewire0 at xheart0
owserial0 at onewire0 "16kb EPROM" sn xxxxxxxxxxxx
owserial0: "PM20300MHZ" p/n 030-1356-001, serial xxxxxx
xbridge0 at xbow0 widget 15: Bridge revision 3
xbpci0 at xbridge0 bus 0: 33 MHz PCI bus
pci0 at xbpci0 bus 0
qlw0 at pci0 dev 0 function 0 "QLogic ISP1020" rev 0x05: irq 0, xbow irq 14
qlw0: nvram corrupt
qlw0: firmware rev 4.66.0, attrs 0x0
scsibus0 at qlw0: 16 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <COMPAQ, BF072863BA, HPB6> xxx.xxxxxxxxxxxxxxxx
sd0: 69464MB, 512 bytes/sector, 142264000 sectors
qlw1 at pci0 dev 1 function 0 "QLogic ISP1020" rev 0x05: irq 1, xbow irq 13
qlw1: nvram corrupt
qlw1: firmware rev 4.66.0, attrs 0x0
scsibus1 at qlw1: 16 targets, initiator 0
ioc0 at pci0 dev 2 function 0 "SGI IOC3" rev 0x01
onewire1 at ioc0
owmac0 at onewire1 "1kb EPROM" sn xxxxxxxxxxxx
owmac0: Ethernet Address xx:xx:xx:xx:xx:xx
owserial1 at onewire1 "16kb EPROM" sn xxxxxxxxxxxx
owserial1: "FP1" p/n 030-0891-003, serial xxxxxx
owserial2 at onewire1 "16kb EPROM" sn xxxxxxxxxxxx
owserial2: "PWR.SPPLY.ER" p/n 060-0035-002, serial xxxxxxxxxx
ioc0: ethernet irq 2, xbow irq 12
ioc0: superio irq 4, xbow irq 11
com0 at ioc0 base 0x20178: ns16550a, 16 byte fifo
com0: console
com1 at ioc0 base 0x20170: ns16550a, 16 byte fifo
iockbc0 at ioc0
iec0 at ioc0: 128KB SSRAM, address xx:xx:xx:xx:xx:xx
icsphy0 at iec0 phy 1: ICS1890 10/100 PHY, rev. 3
lpt at ioc0 not configured
dsrtc0 at ioc0: DS1687
"SGI Rad1" rev 0xc0 at pci0 dev 3 function 0 not configured
power0 at mainbus0
/dev/ksyms: Symbol table not valid.
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: iec0
nfs_boot: using interface iec0, with revarp & bootparams
nfs_boot: client_addr=xxx.xxx.xxx.xxx
nfs_boot: server_addr=xxx.xxx.xxx.xxx hostname=octane
root on xxx.xxx.xxx.xxx:/srv/nfs/octane/root
WARNING: clock gained 168 days
WARNING: CHECK AND RESET THE DATE!
swap on xxx.xxx.xxx.xxx:/srv/nfs/octane/swap
Automatic boot in progress: starting file system checks.
pf enabled
starting network
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
swapctl: adding xxx.xxx.xxx.xxx:/srv/nfs/openbsd/7.0/octeon/hosts/octane2/swap as swap device at priority 0
kvm_mkdb: can't open /dev/ksyms
savecore: /bsd: kvm_read: version misread
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Sun Jan 1 13:11:00 CET 2023
OpenBSD/sgi (octane.machine-hall.org) (console)
login: root
Last login: Sat Dec 31 10:40:33 on console
OpenBSD 7.0 (GENERIC-IP30.MP) #2: Wed Nov 23 21:55:38 CET 2022
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have mail.
octane# machine
octeon
octane# sysctl hw
hw.machine=sgi
hw.model=IP30
hw.ncpu=2
hw.byteorder=4321
hw.pagesize=16384
hw.disknames=sd0:d30991081c4dfedc
hw.diskcount=1
hw.cpuspeed=299
hw.vendor=SGI
hw.product=Octane
hw.physmem=2147483648
hw.usermem=2147450880
hw.ncpufound=2
hw.allowpowerdown=1
hw.ncpuonline=2
octane#