Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2023-01-04 17:40:28
From: yani
Description: FreeBSD/amd64 on Dell Inc. PowerEdge T30
pid 355 (conftest), jid 114, uid 65534: exited on signal 11 (core dumped)
pid 71393 (conftest), jid 111, uid 65534: exited on signal 11 (core dumped)
pid 33028 (conftest), jid 114, uid 65534: exited on signal 11 (core dumped)
pid 9164 (conftest), jid 114, uid 65534: exited on signal 11 (core dumped)
pid 98276 (conftest), jid 127, uid 65534: exited on signal 11 (core dumped)
Limiting open port RST response from 1581 to 200 packets/sec
pid 95935 (conftest), jid 167, uid 65534: exited on signal 11 (core dumped)
uhid0: at uhub0, port 4, addr 1 (disconnected)
uhid0: detached
uhid0 on uhub0
uhid0: <American Power Conversion Smart-UPS C 1000 FW:UPS 10.0 / ID1005, class 0/0, rev 2.00/1.06, addr 1> on usbus0
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
All buffers synced.
Uptime: 15d18h4m14s
GEOM_MIRROR: Device swap: provider destroyed.
GEOM_MIRROR: Device swap destroyed.
uhid0: detached
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-RELEASE releng/12.4-n235809-f2877ac4fb03 MEGASERVER12 amd64
FreeBSD clang version 13.0.0 (xxx@xxx.xxx:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1225 v5 @ 3.30GHz (3312.16-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xc04<RSBA>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33220689920 (31681 MB)
CPU microcode: updated from 0xec to 0xf0
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 3 2 1
Timecounter "TSC-low" frequency 1656081959 Hz quality 1000
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
000.000052 [4337] netmap_init               netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf020000-0xdf02ffff irq 17 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf034000-0xdf035fff,0xdf038000-0xdf0380ff,0xdf037000-0xdf0377ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
em0: <Intel(R) I219-LM SPT-H(2)> mem 0xdf000000-0xdf01ffff irq 16 at device 31.6 on pci0
em0: EEPROM V0.8-4
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: netmap queues/slots: TX 1/1024, RX 1/1024
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 CAM
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA HDWN180 GX2M> ACS-3 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 7630885MB (15628053168 512 byte sectors)
ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA HDWG180 0603> ACS-3 ATA SATA 3.x device
ada1: Serial Number xxxxxxxx
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 7630885MB (15628053168 512 byte sectors)
ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0
ses0: cd0,pass2 in 'Slot 02', SATA Slot: scbus2 target 0
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVD+-RW GU90N A3C1> Removable CD-ROM SCSI device
cd0: Serial Number xxxxxxxx
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
GEOM_MIRROR: Device mirror/swap launched (2/2).
uhub0: 26 ports with 26 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <American Power Conversion Smart-UPS C 1000 FW:UPS 10.0 / ID1005> at usbus0
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer
[drm] Got stolen memory base 0x8e000000, size 0x2000000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-2
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-2
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-3: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-3
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-3: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-3
[drm]   - kern.vt.fb.default_mode
[drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=768 width=1024 depth=32
cmsize=16 size=3145728
pbase=0xc0040000 vbase=0xfffff800c0040000
name=drmn0 flags=0x0 stride=4096 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
device_attach: acpi_wmi0 attach returned 6
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
device_attach: acpi_wmi0 attach returned 6
lo0: link state changed to UP
i915/skl_dmc_ver1_27.bin: could not load firmware image, error 2
drmn0: fail (0) to get firmware image with name: i915/skl_dmc_ver1_27.bin
drmn0: successfully loaded firmware image with mapped name: i915_skl_dmc_ver1_27_bin
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
em0: link state changed to UP
uhid0 on uhub0
uhid0: <American Power Conversion Smart-UPS C 1000 FW:UPS 10.0 / ID1005, class 0/0, rev 2.00/1.06, addr 1> on usbus0
pflog0: promiscuous mode enabled