Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2023-02-26 13:47:52
From: randoclunker
Description: Asus X541SA
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-RELEASE-p6 GENERIC amd64 FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) VT(efifb): resolution 800x600 CPU: Intel(R) Pentium(R) CPU N3710 @ 1.60GHz (1600.16-MHz K8-class CPU) Origin="GenuineIntel" Id=0x406c4 Family=0x6 Model=0x4c Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3953541120 (3770 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <_ASUS_ Notebook> WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) ioapic0 <Version 2.0> irqs 0-114 Launching APs: 2 1 3 random: entropy device external interface kbd1 at kbdmux0 [ath_dfs] loaded [ath_rate] loaded [ar9300] loaded [ar5212] loaded [ar5416] loaded [ar5211] loaded [ar5210] loaded [ath] loaded efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x7b194000-0x7b19401e smbios0: Version: 3.0, BCD Revision: 3.0 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <_ASUS_ Notebook> acpi_ec_ecdt_probe: can't get handle acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x8141e000-0x8141e7ff at device 19.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 xhci0: <Intel Braswell USB 3.0 controller> mem 0x81400000-0x8140ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel Braswell HDA Controller> mem 0x81410000-0x81413fff at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci1: <ACPI PCI bus> on pcib2 re0: <RealTek 810xE PCIe 10/100baseTX> port 0xe000-0xe0ff mem 0x81300000-0x81300fff,0xa0000000-0xa0003fff at device 0.0 on pci1 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x44800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib3 ath0: <Atheros 9285> mem 0x81200000-0x8120ffff at device 0.0 on pci2 [ath] AR9285E_20 detected; using XE TX gain tables [ath] AR9285 Main LNA config: LNA2 [ath] AR9285 Alt LNA config: LNA1 [ath] LNA diversity enabled, Diversity enabled [ath] Enabling diversity for Kite ath0: [HT] enabling HT modes ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams ath0: AR9285 mac 192.2 RF5133 phy 14.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 sdhci_acpi0: <Intel Bay Trail/Braswell SDXC Controller> iomem 0x81420000-0x81420fff irq 47 on acpi0 mmc0: <MMC/SD bus> on sdhci_acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC" frequency 1599947332 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.1: <Intel XHCI root HUB> at usbus0 hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC256 (Internal Analog)> at nid 27 and 26 on hdaa0 pcm1: <Realtek ALC256 (Left Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Braswell (HDMI/DP 8ch)> at nid 7 on hdaa1 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 mmc0: No compatible cards found on bus ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SA400S37240G S1Z40102> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 228936MB (468862128 512 byte sectors) cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GUE1N AS00> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: 0MB (1 0 byte sectors) Trying to mount root from zfs:zroot/ROOT/prexorg []... uhub0: 13 ports with 13 removable, self powered Root mount waiting for: usbus0 ugen0.2: <Logitech USB Optical Mouse> at usbus0 ugen0.3: <Azurewave USB2.0 VGA UVC WebCam> at usbus0 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). [drm] Got stolen memory base 0x7ce00000, size 0x2000000 sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] Initialized i915 1.6.0 20200917 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "fb". start FB_INFO: type=11 height=768 width=1366 depth=32 pbase=0x901e0000 vbase=0xfffff800901e0000 name=drmn0 flags=0x0 stride=5504 bpp=32 end FB_INFO acpi_wmi0: <ACPI-WMI mapping> on acpi0 ichsmb0: <Intel Braswell SMBus controller> port 0xf040-0xf05f mem 0x81418000-0x8141801f at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN ums0 on uhub0 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/34.01, addr 1> on usbus0 ums0: 8 buttons and [XYZT] coordinates ID=0 wlan0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN ath0: ath_reset: unable to reset hardware; hal status 3