Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2023-03-31 17:18:59
From: johnny-mnemonic
Description: OpenBSD/sgi 7.3 on SGI R10000 Indigo2 with octeon fs, something is unfortunately broken, see github.com/the-machine-hall/openbsd-src/issues/2 for details
>> printenv
SystemPartition=bootp()
OSLoadPartition=bootp()
AutoLoad=No
TimeZone=PST8PDT
console=d1
diskless=0
dbaud=9600
volume=80
sgilogo=y
autopower=y
netaddr=xxx.xxx.xxx.xxx
eaddr=xx:xx:xx:xx:xx:xx
boottune=1
ConsoleOut=serial(0)
ConsoleIn=serial(0)
cpufreq=194
OSLoadFilename=/bsd
OSLoader=sash
>> boot
Setting $netaddr to xxx.xxx.xxx.xxx (from server )
Obtaining /sash from server
4129216+864112 entry: 0xa800000020020000
ARCS64 Firmware
Found SGI-IP28, setting up.
Initial setup done, switching console.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3 (GENERIC-IP28) #0: Thu Mar 30 17:57:07 CEST 2023
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sgi/compile/GENERIC-IP28
real mem = 268435456 (256MB)
rsvd mem = 1064960 (2MB)
avail mem = 259670016 (247MB)
warning: no entropy supplied by boot loader
random: boothowto does not indicate good seed
mainbus0 at root: POWER Indigo2 R10000
cpu0 at mainbus0: MIPS R10000 CPU rev 2.5 194 MHz, R10000 FPU rev 0.0
cpu0: cache L1-I 32KB D 32KB 2 way, L2 1024KB 2 way
int0 at mainbus0 addr 0x1fbd9000
imc0 at mainbus0: revision 5
gio0 at imc0
hpc0 at gio0 addr 0x1fb80000: SGI HPC3 (onboard)
zs0 at hpc0 offset 0x00059830 irq 29: 85230
zstty0 at zs0 channel 1: console
zstty1 at zs0 channel 0
pckbc0 at hpc0 offset 0x00059840 irq 28
sq0 at hpc0 offset 0x00054000 irq 3: Seeq 80c03, address xx:xx:xx:xx:xx:xx
wdsc0 at hpc0 offset 0x00044000 irq 1: WD33C93B, 20.0 MHz, burst DMA
wdsc0: microcode revision 0x0d, fast SCSI
scsibus0 at wdsc0: 8 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <IBM, DCAS-32160, S65A> xxxxxx.xxxxxxxxxxxxxxxxxxxxxxxx
sd0: 2063MB, 512 bytes/sector, 4226725 sectors
wdsc1 at hpc0 offset 0x0004c000 irq 2: WD33C93B, 20.0 MHz, burst DMA
wdsc1: microcode revision 0x0d, fast SCSI
scsibus1 at wdsc1: 8 targets, initiator 0
haltwo at hpc0 offset 0x00058000 irq 12 not configured
pione at hpc0 offset 0x00059800 irq 5 not configured
panel0 at hpc0 offset 0x00059850 irq 9: power button
dsclock0 at hpc0 offset 0x00060000
eisa0 at imc0 irq 27
Trap cause = 13 Frame 0x9800000020007e18
Trap PC 0xa8000000200991d8 RA 0xa80000002029b4fc fault 0xc000000000808648
0xa8000000200990e0 (a8000000204a85c0,28,0,0) ra 0xa80000002029b4fc sp 0x9800000020007f70, sz 0
0xa80000002029ab28 (a8000000204a85c0,28,0,0) ra 0x0 sp 0x9800000020007f70, sz 0
User-level: pid 0
stopped on non ddb fault
Stopped at 0xa8000000200991d8: teq v1,zero
ddb>