Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2023-04-26 18:21:26
From: johnny-mnemonic
Description: OpenBSD/sgi 7.2 on SGI R4600 Indy with octeon fs, see github.com/the-machine-hall/openbsd-src/releases/tag/openbsd.72.sgi
>> printenv
SystemPartition=bootp()
OSLoadPartition=bootp()
OSLoader=AC10024D.bootecoff
OSLoadFilename=AC10024D.bsd.IP22
AutoLoad=Yes
TimeZone=PST8PDT
console=d1
diskless=1
dbaud=9600
volume=80
sgilogo=y
autopower=y
netaddr=xxx.xxx.xxx.xxx
eaddr=xx:xx:xx:xx:xx:xx
ConsoleOut=serial(0)
ConsoleIn=serial(0)
cpufreq=134
>> boot
Setting $netaddr to xxx.xxx.xxx.xxx (from server )
Obtaining /AC10024D.bootecoff from server
47744+240+2608 entry: 0x880020f0

OpenBSD/sgi-IP22 ARCBios boot version 1.13
arg 0: bootp()/AC10024D.bootecoff
arg 1: ConsoleIn=serial(0)
arg 2: ConsoleOut=serial(0)
arg 3: SystemPartition=bootp()
arg 4: OSLoader=AC10024D.bootecoff
arg 5: OSLoadPartition=bootp()
arg 6: OSLoadFilename=AC10024D.bsd.IP22
Boot: bootp()AC10024D.bsd.IP22
Setting $netaddr to xxx.xxx.xxx.xxx (from server )
Obtaining AC10024D.bsd.IP22 from server
Setting $netaddr to xxx.xxx.xxx.xxx (from server )
Obtaining AC10024D.bsd.IP22 from server
4171568+869376Setting $netaddr to xxx.xxx.xxx.xxx (from server )
Obtaining AC10024D.bsd.IP22 from server
 [98+88+271488+163898]=0x0
ARCS32 Firmware Version 1.10
Found SGI-IP22, setting up.
Initial setup done, switching console.
[ using 436352 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2022 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 7.2 (GENERIC-IP22) #2: Tue Jan  3 13:18:29 CET 2023
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/srv/storage/src/sys/arch/sgi/compile/GENERIC-IP22
real mem = 134217728 (128MB)
rsvd mem = 802816 (1MB)
avail mem = 126402560 (120MB)
random: boothowto does not indicate good seed
mainbus0 at root: Indy
cpu0 at mainbus0: QED R4600 Orion CPU rev 2.0 134 MHz, R4600 Orion FPC rev 2.0
cpu0: cache L1-I 16KB D 16KB 2 way, L2 512KB direct
int0 at mainbus0 addr 0x1fbd9880
imc0 at mainbus0: revision 3
gio0 at imc0
newport0 at gio0 addr 0x1f000000: Indy 24-bit (board rev 3, xmap rev 5, vc2 rev 0)
newport0: 1040x768, 24bpp
wsdisplay0 at newport0 mux 1
wsdisplay0: screen 0 added (std, vt100 emulation)
hpc0 at gio0 addr 0x1fb80000: SGI HPC3 (onboard)
zs0 at hpc0 offset 0x00059830 irq 29: 85230
zstty0 at zs0 channel 1: console
zstty1 at zs0 channel 0
pckbc0 at hpc0 offset 0x00059840 irq 28
sq0 at hpc0 offset 0x00054000 irq 3: Seeq 80c03, address xx:xx:xx:xx:xx:xx
wdsc0 at hpc0 offset 0x00044000 irq 1: WD33C93B, 20.0 MHz, burst DMA
wdsc0: microcode revision 0x0d, fast SCSI
scsibus0 at wdsc0: 8 targets, initiator 0
haltwo at hpc0 offset 0x00058000 irq 12 not configured
pione at hpc0 offset 0x00059800 irq 5 not configured
panel0 at hpc0 offset 0x00059850 irq 9: power and volume buttons
dsclock0 at hpc0 offset 0x00060000
clock0 at mainbus0: int 5
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: sq0
nfs_boot: using interface sq0, with revarp & bootparams
nfs_boot: client_addr=xxx.xxx.xxx.xxx
nfs_boot: server_addr=xxx.xxx.xxx.xxx hostname=indy-2
root on xxx.xxx.xxx.xxx:/srv/nfs/indy-2/root
WARNING: clock gained 134 days
WARNING: CHECK AND RESET THE DATE!
swap on xxx.xxx.xxx.xxx:/srv/nfs/indy-2/swap
Automatic boot in progress: starting file system checks.
pf enabled
starting network
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
swapctl: adding xxx.xxx.xxx.xxx:/srv/nfs/openbsd/7.2/octeon/hosts/octane2/swap as swap device at priority 0
savecore: no core dump (no dumpdev)
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Mon Apr 24 20:49:47 CEST 2023

OpenBSD/sgi (indy-2.machine-hall.org) (console)

login: root
Last login: Sat Apr 22 21:25:57 on ttyp0 from xxx.xxx.xxx.xxx
OpenBSD 7.2 (GENERIC-IP22) #2: Tue Jan  3 13:18:29 CET 2023

Welcome to OpenBSD: The proactively secure Unix-like operating system.

Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code.  With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.

You have mail.
indy-2# machine
octeon
indy-2# sysctl hw
hw.machine=sgi
hw.model=IP22
hw.ncpu=1
hw.byteorder=4321
hw.pagesize=16384
hw.disknames=
hw.diskcount=0
hw.cpuspeed=133
hw.vendor=SGI
hw.product=Indy
hw.physmem=134217728
hw.usermem=134184960
hw.ncpufound=1
hw.allowpowerdown=1
hw.ncpuonline=1
hw.power=1
indy-2#