Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-04-26 18:43:35
From: johnny-mnemonic
Description: OpenBSD/sgi 7.2 MP on dual node SGI R10000 Origin200 with octeon fs, see github.com/the-machine-hall/openbsd-src/releases/tag/openbsd.72.sgi
>> printenv AutoLoad=No dbgtty=/dev/tty/ioc30 root=dks0d1s0 nonstop=0 rbaud=19200 SystemPartition=bootp(): OSLoadPartition=bootp(): TimeZone=PST8PDT console=d oldConsolePath=/hw/module/1/slot/MotherBoard gConsoleIn=default gConsoleOut=default diskless=0 scsihostid=00 ProbeAllScsi=n RestorePartEnv=y dbaud=9600 volume=80 sgilogo=y netaddr=xxx.xxx.xxx.xxx ConsoleOut=/dev/tty/ioc30 ConsoleIn=/dev/tty/ioc30 cpufreq=180 ConsolePath=/hw/module/1/slot/MotherBoard >> boot Setting $netaddr to xxx.xxx.xxx.xxx (from server ) Obtaining / from server 7324688+722032 entry: 0xa800000000040000 ARCS64 Firmware Found SGI-IP27, setting up. Machine is in M mode. Initial setup done, switching console. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2022 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 7.2 (GENERIC-IP27.MP) #1: Tue Jan 3 13:28:16 CET 2023 [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/srv/storage/src/sys/arch/sgi/compile/GENERIC-IP27.MP real mem = 1207959552 (1152MB) rsvd mem = 12599296 (13MB) avail mem = 1176174592 (1121MB) warning: no entropy supplied by boot loader random: boothowto does not indicate good seed mainbus0 at root: Origin 200 cpu0 at mainbus0 nasid 0: MIPS R10000 CPU rev 3.1 180 MHz, R10000 FPU rev 3.1 cpu0: cache L1-I 32KB D 32KB 2 way, L2 1024KB 2 way clock0 at mainbus0 nasid 0: int 5 cpu1 at mainbus0 nasid 0: MIPS R10000 CPU rev 3.1 180 MHz, R10000 FPU rev 3.1 cpu1: cache L1-I 32KB D 32KB 2 way, L2 1024KB 2 way xbow0 at mainbus0 nasid 0: Bridge revision 3 xbridge0 at xbow0 widget 8: Bridge revision 3 xbpci0 at xbridge0 bus 0: 33 MHz PCI bus pci0 at xbpci0 bus 0 qlw0 at pci0 dev 0 function 0 "QLogic ISP1020" rev 0x05: irq 0, xbow irq 62 qlw0: nvram corrupt qlw0: firmware rev 4.66.0, attrs 0x0 scsibus0 at qlw0: 16 targets, initiator 0 qlw1 at pci0 dev 1 function 0 "QLogic ISP1020" rev 0x05: irq 1, xbow irq 61 qlw1: nvram corrupt qlw1: firmware rev 4.66.0, attrs 0x0 scsibus1 at qlw1: 16 targets, initiator 0 ioc0 at pci0 dev 2 function 0 "SGI IOC3" rev 0x01 onewire0 at ioc0 owmac0 at onewire0 family 0x11 sn xxxxxxxxxxxx owmac0: Ethernet Address xx:xx:xx:xx:xx:xx ioc0: ethernet irq 2, xbow irq 60 ioc0: superio irq 3, xbow irq 59 com0 at ioc0 base 0x20178: ns16550a, 16 byte fifo com0: console com1 at ioc0 base 0x20170: ns16550a, 16 byte fifo iockbc0 at ioc0 iec0 at ioc0: 128KB SSRAM, address xx:xx:xx:xx:xx:xx nsphy0 at iec0 phy 31: DP83840 10/100 PHY, rev. 1 lpt at ioc0 not configured dsrtc0 at ioc0: DS1742W xbow1 at mainbus0 nasid 1: Bridge revision 3 xbridge1 at xbow1 widget 8: Bridge revision 3 xbpci1 at xbridge1 bus 0: 33 MHz PCI bus pci1 at xbpci1 bus 0 qlw2 at pci1 dev 0 function 0 "QLogic ISP1020" rev 0x05: irq 0, xbow irq 57 qlw2: nvram corrupt qlw2: firmware rev 4.66.0, attrs 0x0 scsibus2 at qlw2: 16 targets, initiator 0 qlw3 at pci1 dev 1 function 0 "QLogic ISP1020" rev 0x05: irq 1, xbow irq 56 qlw3: nvram corrupt qlw3: firmware rev 4.66.0, attrs 0x0 scsibus3 at qlw3: 16 targets, initiator 0 ioc1 at pci1 dev 2 function 0 "SGI IOC3" rev 0x01 onewire1 at ioc1 owmac1 at onewire1 family 0x11 sn xxxxxxxxxxxx owmac1: Ethernet Address xx:xx:xx:xx:xx:xx ioc1: ethernet irq 2, xbow irq 55 ioc1: superio irq 3, xbow irq 54 com4 at ioc1 base 0x20178: ns16550a, 16 byte fifo com5 at ioc1 base 0x20170: ns16550a, 16 byte fifo iockbc1 at ioc1 iec1 at ioc1: 128KB SSRAM, address xx:xx:xx:xx:xx:xx nsphy1 at iec1 phy 31: DP83840 10/100 PHY, rev. 1 lpt at ioc1 not configured dsrtc at ioc1 not configured /dev/ksyms: Symbol table not valid. vscsi0 at root scsibus4 at vscsi0: 256 targets softraid0 at root scsibus5 at softraid0: 256 targets boot device: 'bootp():' unrecognized. root device: iec0 nfs_boot: using interface iec0, with revarp & bootparams nfs_boot: client_addr=xxx.xxx.xxx.xxx nfs_boot: server_addr=xxx.xxx.xxx.xxx hostname=origin200-2 root on xxx.xxx.xxx.xxx:/srv/nfs/origin200-2/root WARNING: clock gained 135 days WARNING: CHECK AND RESET THE DATE! swap on xxx.xxx.xxx.xxx:/srv/nfs/origin200-2/swap cpu1 launched Automatic boot in progress: starting file system checks. pf enabled starting network starting early daemons: syslogd pflogd ntpd. starting RPC daemons:. swapctl: adding xxx.xxx.xxx.xxx:/srv/nfs/openbsd/7.2/octeon/hosts/octane2/swap as swap device at priority 0 kvm_mkdb: can't open /dev/ksyms savecore: /bsd: kvm_read: version misread checking quotas: done. clearing /tmp kern.securelevel: 0 -> 1 creating runtime link editor directory cache. preserving editor files. starting network daemons: sshd smtpd sndiod. starting local daemons: cron. Tue Apr 25 17:13:50 CEST 2023 OpenBSD/sgi (origin200-2.machine-hall.org) (console) login: root Last login: Mon Apr 24 20:51:20 on ttyp0 from xxx.xxx.xxx.xxx OpenBSD 7.2 (GENERIC-IP27.MP) #1: Tue Jan 3 13:28:16 CET 2023 Welcome to OpenBSD: The proactively secure Unix-like operating system. Please use the sendbug(1) utility to report bugs in the system. Before reporting a bug, please try to reproduce it with the latest version of the code. With bug reports, please try to ensure that enough information to reproduce the problem is enclosed, and if a known fix for it exists, include that as well. You have mail. origin200-2# machine octeon origin200-2# sysctl hw hw.machine=sgi hw.model=IP27 hw.ncpu=2 hw.byteorder=4321 hw.pagesize=16384 hw.disknames= hw.diskcount=0 hw.cpuspeed=179 hw.vendor=SGI hw.product=Origin 200 hw.physmem=1207959552 hw.usermem=1207926784 hw.ncpufound=4 hw.allowpowerdown=1 hw.ncpuonline=2 hw.power=1 origin200-2#